K323 / 2027
Light overview

Lesson 4 of 11

Refractive index and the sine ratio

  • I can apply the constant sine ratio to new situations and calculations.Syllabus

    Syllabus K323, 12(d). Apply the constant sine ratio to new situations and calculations.

  • I can define refractive index as the ratio of vacuum light speed to speed in the medium.Syllabus

    Syllabus K323, 12(e). Define refractive index as the ratio of vacuum light speed to speed in the medium.

The refractive index of a medium tells you how much it slows light. It also fixes how far a ray bends, through the ratio sin i / sin r.

In refraction, a ray bends towards the normal when light slows down. It bends away when light speeds up.

Refractive index and speed

Refractive index   n = c/vc is the speed of light in a vacuum. v is the speed of light in the medium. n is a ratio, so it has no unit.

For the same light, a higher refractive index means a lower speed. It does not mean the material has a greater mass density.

The speed of light in a vacuum is about 3.0 x 108 m/s. Air slows light very little, so its refractive index is taken as 1. Water has n of about 1.33, common glass about 1.5 and diamond about 2.42.

Speed and index

Light travels at 2.0 x 108 m/s in a material

Use the speed in a vacuum, 3.0 x 108 m/s:

n = (3.0 x 108)/(2.0 x 108) = 1.50.

Keep both speeds in the same unit. The answer is 1.50, not 1.50 m/s.

Check your understanding

The speed of light in a vacuum is 3.0 x 108 m/s. Water has a refractive index of 1.33. What is the speed of light in water?

  1. About 2.3 x 108 m/s.
  2. 3.0 x 108 m/s, because the speed of light is the same in every medium.
  3. About 4.0 x 108 m/s.
Show the answer

About 2.3 x 108 m/s.

n = c / v, so v = c / n = 3.0 x 108 / 1.33 = 2.3 x 108 m/s. Light is slower in water than in a vacuum.

Use the sines of the angles

Take one pair of media and the same light. Then sin i / sin r is constant, as long as you say which way the light travels. If the first medium has index n1 and the second has n2, the constant is n2/n1.

sin i / sin r = n2/n1This is the same as n1 sin i = n2 sin r. For light going from air into a material, nair = 1, so n = sin i / sin r.

This rule is known as Snell's law. It is named after Willebrord Snellius, who worked it out in 1621. Ibn Sahl had found it in Baghdad by 984.

Entering the material

From air into n = 1.50 at i = 45°

  1. Choose the direction: air is the first medium and the material is the second.
  2. Rearrange: sin r = sin 45°/1.50 = 0.4714.
  3. Use inverse sine in degree mode: r = 28.1°.

The angle is smaller, which fits bending towards the normal. Do not divide 45° by 1.50. The rule uses the sines, not the angles.

Calculated angles for light going from air into n = 1.50
Incidence isin r = sin i / 1.50Refraction r
30°0.333319.5°
45°0.471428.1°
60°0.577435.3°

Leaving the material

From n = 1.50 into air at i = 30° inside the material

Now n1 = 1.50 and n2 = 1:

sin r = 1.50 sin 30° = 0.750; r = 48.6°.

The ray bends away from the normal. The refractive index of the material is still 1.50. Reversing the ray turns the sine ratio over. It does not change n = c/v.

Try it step by step

Work it out in steps: sin i, then sin r = sin i / n, then Angle of refraction r in degrees.

  1. Problem 1. A ray enters water (n = 1.33) from air at an angle of incidence of 30 degrees. Find the angle of refraction.
  2. Problem 2. A ray enters glass (n = 1.50) from air at an angle of incidence of 50 degrees. Find the angle of refraction.
  3. Problem 3. A ray enters water (n = 1.33) from air at an angle of incidence of 40 degrees. Find the angle of refraction.
Show the answer

Problem 1.

sin i: sin 30 = 0.500

sin r = sin i / n: sin r = 0.500 / 1.33 = 0.376

Angle of refraction r in degrees: r = inverse sin of 0.376 = 22.1 degrees, which is 22 degrees to 2 sf

Problem 2.

sin i: sin 50 = 0.766

sin r = sin i / n: sin r = 0.766 / 1.50 = 0.511

Angle of refraction r in degrees: r = inverse sin of 0.511 = 30.7 degrees, which is 31 degrees to 2 sf

Problem 3.

sin i: sin 40 = 0.643

sin r = sin i / n: sin r = 0.643 / 1.33 = 0.483

Angle of refraction r in degrees: r = inverse sin of 0.483 = 28.9 degrees, which is 29 degrees to 2 sf

Label the first and second media before you substitute. The short form n = sin i / sin r is for light going from air into the material. Do not use it unchanged for a ray that leaves the material.

Check your understanding

Light enters a material of refractive index 1.50 from air at 45 degrees to the normal. Taking the refractive index of air as 1, which calculation gives the refracted angle?

  1. 45 x 1.50 = 67.5 degrees.
  2. Inverse sine of (sin 45/1.50), giving 28.1 degrees.
  3. 45/1.50 = 30 degrees, dividing the angle by the refractive index.
Show the answer

Inverse sine of (sin 45/1.50), giving 28.1 degrees.

For air into this material, 1.50 = sin i/sin r. Rearranging gives sin r = sin 45/1.50 = 0.4714, so r = 28.1 degrees. This smaller angle agrees with bending towards the normal.