K323 / 2027
Light overview

Lesson 10 of 11

Drawing lens ray diagrams

  • I can construct ray diagrams showing real and virtual images formed by a thin converging lens.Syllabus

    Syllabus K323, 12(j). Construct ray diagrams showing real and virtual images formed by a thin converging lens.

Make a guess. You are not marked.

A ray of light from the top of an object passes through the optical centre of a thin converging lens. What does the ray do?

  1. It bends to pass through the principal focus.
  2. It leaves the lens parallel to the principal axis.
  3. It goes straight on without bending.
Show the answer

It goes straight on without bending.

A ray through the optical centre of a thin lens does not change direction. This makes it one of the two easiest rays to draw.

To find the image formed by a converging lens, draw two rays from the top of the object. The top of the image is where they meet.

A real image is where rays really meet. A virtual image is where only their backward extensions meet.

Draw an image with two rays

  1. Draw the principal axis and the thin lens. Choose one scale for both horizontal and vertical distances. Mark F on each side.
  2. Draw the object as an upright arrow at its given distance. Start both rays at its tip, so that they come from the same point.
  3. Draw one ray parallel to the axis as far as the lens. After the lens it passes through the principal focus on the far side.
  4. Draw a second ray from the tip through the optical centre. In the thin-lens model it goes straight on.
  5. If the rays meet after the lens, the tip of a real image is there. If they spread apart, extend them backwards with dashed lines. The tip of the virtual image is where the dashed lines meet.
  6. Draw the image arrow from that tip to the axis. Read its position, its height and which way up it is from your drawing.

A third ray is a useful check. It passes through the principal focus on the near side and leaves the lens parallel to the axis.

Solid arrows show the way light really travels. Dashed backward extensions do not show light travelling backwards.

Three rays from the top of the object meet at the image

The lens has f = 8.0 cm. The object is 2.0 cm tall and 16 cm from the lens. The blue arrow is the object and the orange arrow is the image.

A real, inverted image of the same size

A real, inverted image of the same sizeThe upright object is 16 cm to the left of a converging lens of focal length 8 cm. Its height is 2 cm. Three rays from its top meet 16 cm to the right, 2 cm below the axis. The image is real, inverted and the same height as the object. The third ray passes through the near focus and leaves the lens parallel to the axis. One ray reaches the lens parallel to the axis and emerges through the far focus. A second ray through the optical centre continues undeviated. Equal scales apply horizontally and vertically, with 8 SVG units representing one centimetre in the supplied model.FFLensObject2 cmImage 2 cmScreen16 cm16 cm

All three rays meet at one point. Two rays are enough to find it. The third is a check.

The object is at twice the focal length. All three rays from its tip meet at one point, which is the tip of the image. The image is real, inverted and the same size as the object.

Two constructions

Use f = 8 cm and an object 2 cm tall

First put the object 12 cm to the left of the lens. The parallel ray reaches the lens 2 cm above the axis. It then passes through the focus 8 cm to the right. The ray through the optical centre meets it 24 cm to the right and 4 cm below the axis. The rays really meet there, so the image is real.

Now put the object only 4 cm to the left and use the same two rules. The rays spread apart after the lens. Extend them backwards. The lines meet 8 cm to the left and 4 cm above the axis. Only the extensions meet there, so the image is virtual.

You can also read the image height from the scale drawing or work it out. The ray through the optical centre is one straight line. So image height / object height = image distance / object distance. In the first construction, 24 / 12 = 2, so the 2 cm object gives a 4 cm image.

On paper, you could let 1 cm stand for 4 cm, both across and up the page. The diagrams on your screen carry their own labels. Their size on your device is not a centimetre scale.

Check your understanding

A thin converging lens has focal length 8 cm. A 2 cm tall upright object is 4 cm to its left. A construction puts the backward intersection of emergent rays 8 cm to the left and 4 cm above the axis. How should the image be described?

  1. Real and inverted, because every intersection in a ray diagram is a real image.
  2. Virtual, upright and magnified, with twice the object height.
  3. Virtual and diminished, because 4 cm is smaller than the 8 cm focal length.
Show the answer

Virtual, upright and magnified, with twice the object height.

The backward extensions locate an apparent image on the object side. Its 4 cm height is twice the 2 cm object height. A screen at that apparent position cannot collect actual converging rays to form this image.

Do not bend a ray towards where you think the image is. Draw each ray by its rule first. The image is wherever the rays, or their extensions, then meet.

Check your understanding

A 3 cm tall object stands 30 cm from a thin converging lens of focal length 10 cm. A scale ray diagram shows the two rays meeting 15 cm beyond the lens. What is the image like?

  1. Real, inverted and 1.5 cm tall.
  2. Virtual, upright and 3 cm tall.
  3. Real, inverted and 6 cm tall.
Show the answer

Real, inverted and 1.5 cm tall.

The rays really meet, so the image is real. The ray through the optical centre goes straight on, so it is below the axis beyond the lens: the image is inverted. That ray travels half as far after the lens as before it, so the image is half as tall: 3 x 15 / 30 = 1.5 cm.