Lesson 2 of 11
The image in a plane mirror
I can apply equal incidence and reflection angles in constructions, measurements and calculations.Syllabus
Syllabus K323, 12(b). Apply equal incidence and reflection angles in constructions, measurements and calculations.
The image in a plane mirror is virtual, upright and the same size as the object. It is as far behind the mirror as the object is in front.
A plane mirror is a flat mirror. Every ray that meets it obeys the law of reflection, r = i.
Why the image seems to be behind the mirror
Light from one point on the object reflects from the mirror into your eye. The reflected rays spread apart, or diverge. Trace them straight back behind the mirror, and the lines meet at one point.
Your eye sees the light as if it came from that point. Real reflected light enters your eye. No light has to travel to the point behind the mirror.
Reflected rays appear to come from behind the mirror
Solid green lines are real rays. Dashed green lines are backward extensions. No light travels behind the mirror.
Seen from the front, the letter looks reversed
Describe the image
The image is virtual, upright and the same size as the object. It is as far behind the mirror as the object is in front.
A virtual image is one where the real rays do not meet. It cannot be formed on a screen placed where it seems to be.
A letter such as F looks reversed in a mirror. This is called lateral inversion. The mirror puts each image point straight behind the mirror, opposite its object point. It does not swap two things on your left and right.
Ambulances and fire engines often carry a label on the front that is written in reverse. A driver ahead reads it the right way round in the rear-view mirror.
Image position
An object is 18 cm in front of a fixed mirror
The image is 18 cm behind the mirror. So the distance from object to image is 18 + 18 = 36 cm.
Move the object 5 cm towards the mirror. It is now 13 cm in front, and the image is 13 cm behind. The distance between them becomes 26 cm. Measure both distances from the reflecting surface.
Try it step by step
Work it out in steps: Image distance behind the mirror in cm, then Distance from object to image in cm.
Show the answer
Problem 1.
Image distance behind the mirror in cm: The image is as far behind the mirror as the object is in front: 15 cm
Distance from object to image in cm: Object to image = 15 + 15 = 30 cm
Problem 2.
Image distance behind the mirror in cm: Image distance = 22 cm behind the mirror
Distance from object to image in cm: Object to image = 22 + 22 = 44 cm
Problem 3.
Image distance behind the mirror in cm: Image distance = 9.5 cm behind the mirror
Distance from object to image in cm: Object to image = 9.5 + 9.5 = 19 cm
Find the image by experiment
Draw a line along the reflecting surface. You can find an image point by sighting along two reflected rays and tracing both back. A second way uses a marker pin behind the mirror. Its tip must show above the mirror, next to the image.
Move the marker until it stays in line with the image as you move your eye from side to side. This is a no-parallax match. It means the tip of the marker is at the same place as the image.
Measure from the marker to the reflecting surface and compare it with the object distance. Use a ruler long enough for the whole distance and read its millimetre marks with care. Measure to the reflecting surface, not to a holder or a frame.
Virtual does not mean invisible. You see the image when reflected light enters your eye. "Virtual" is about where the real rays meet, not about whether you can see the image.
Check your understanding
A candle stands in front of a plane mirror. A student holds a sheet of paper behind the mirror, at the place where the image of the candle appears to be. What does the paper show?
Show the answer
Nothing. No light from the candle reaches the paper.
The image is virtual. The reflected rays only seem to come from behind the mirror. No real rays meet there, so there is nothing for a screen to catch.