Lesson 8 of 10
Heating through a change of state
I can apply energy transfer = mass x specific heat capacity x temperature change.Syllabus
Syllabus K323, 9(c). Apply energy transfer = mass x specific heat capacity x temperature change.
I can apply energy transfer for a change of state = mass x specific latent heat.Syllabus
Syllabus K323, 9(g). Apply energy transfer for a change of state = mass x specific latent heat.
Make a guess. You are not marked.
A heater warms 0.10 kg of ice from -10 degrees C to 0 degrees C, melts it, then warms the water to 20 degrees C. Which stage takes the most energy?
Show the answer
Melting the ice at 0 degrees C.
Melting takes 0.10 x 334000 = 33400 J. Warming the ice takes 2100 J and warming the water takes 8400 J. The stage with no temperature rise needs the most energy.
When a sample warms and also changes state, split the change into stages. Use mcΔT for each warming stage and ml for each change of state, then add.
E = mcΔT gives the energy for a temperature change within one state. E = ml gives the energy for a change of state at constant temperature.
Calculate each stage separately
Now start with 0.10 kg of ice at -10°C and finish with water at 20°C, at normal atmospheric pressure. First warm the ice to 0°C, then melt it, then warm the water. The supplied heat capacities apply to their respective states.
Follow the same 0.10 kg sample through three stages
Ice at -10 °C becomes water at 20 °C. Use the supplied material values and a melting point of 0 °C at the stated pressure. The energy amounts below all reach the sample; warming the apparatus and transfers to the surroundings are excluded.
1. Warm the ice
cice = 2100 J/(kg °C); ΔT = 0 - (-10) = 10 °C.
E = mciceΔT = 0.10 × 2100 × 10 = 2100 J.
2. Melt the ice
Specific latent heat of fusion: lf = 334000 J/kg.
E = mlf = 0.10 × 334000 = 33400 J.
The lowercase lf is energy per unit mass. The sample's temperature stays at 0 °C during melting.
3. Warm the water
cwater = 4200 J/(kg °C); ΔT = 20 - 0 = 20 °C.
E = mcwaterΔT = 0.10 × 4200 × 20 = 8400 J.
Total energy transferred in = 2100 + 33400 + 8400 = 43900 J.
The diagrams show the sequence. Box sizes and arrow lengths do not measure energy or time.
- Warm the ice from -10°C to 0°C: E = mcΔT = 0.10 x 2100 x 10 = 2100 J.
- Melt the ice at 0°C: E = ml = 0.10 x 334000 = 33400 J.
- Warm the water from 0°C to 20°C: E = mcΔT = 0.10 x 4200 x 20 = 8400 J.
The melting contribution is 33400 J even though the temperature does not rise during that stage. The two warming contributions are 2100 J and 8400 J. Adding them gives 43900 J. One mcΔT calculation across -10°C to 20°C does not give the complete change, and nor does ml alone.
This total excludes energy warming the apparatus or escaping to the surroundings. An actual heater may need to supply more. The supplied material values are data for this example, not values that can be applied to every substance.
Choose the stage, then the equation. Use mcΔT for a temperature change within one state. Use ml for the mass that changes state at its transition temperature. Capital L is total energy; lowercase l is energy per mass.
Check your understanding
A 0.20 kg sample of ice at -5 degrees C becomes water at 10 degrees C at normal atmospheric pressure. Supplied values are c_ice = 2100 J/(kg degree C), l_f = 334000 J/kg and c_water = 4200 J/(kg degree C). Which of these is the total energy that reaches the sample?
Show the answer
77300 J, adding warming the ice, melting it and warming the water.
Warm the ice: 0.20 x 2100 x 5 = 2100 J. Melt it: 0.20 x 334000 = 66800 J. Warm the water: 0.20 x 4200 x 10 = 8400 J. The total is 77300 J.