Lesson 2 of 6
Collect a gas using its properties
Solubility and density determine a suitable setup.
SEC G2 Science K223 / K225 (2027)
I can select simple experimental setups.Syllabus
Syllabus K223 / K225, 1.1(b). Select simple experimental setups
Collect a gas using its properties
How well a gas dissolves in water, and whether it is denser than air, decide how you collect it.
First ask: does the gas dissolve in water? If it is insoluble or only slightly soluble, collect it over water. Fill a gas jar with water and turn it upside down in a trough of water. The gas bubbles in and pushes the water out. You can see when the jar is full, even when the gas is colourless.
A very soluble gas would dissolve in the water, so collect it by pushing out air instead. Now density decides. Density is how much mass is packed into a given volume. A gas denser than air sinks, so lead it to the bottom of an upright jar. It pushes the air up and out. This is downward delivery. A gas less dense than air rises, so lead it to the top of an upside-down jar. This is upward delivery.
| Method | Use it when the gas | Examples |
|---|---|---|
| Over water (displacement of water) | is insoluble or only slightly soluble in water | Hydrogen, oxygen |
| Downward delivery: upright jar, gas enters at the bottom | dissolves in water and is denser than air | Chlorine, hydrogen chloride, sulfur dioxide |
| Upward delivery: upside-down jar, gas enters at the top | dissolves in water and is less dense than air | Ammonia |
| Gas syringe | must have its volume measured | Any gas, such as hydrogen from magnesium and acid |
Carbon dioxide is only slightly soluble and is denser than air, so it can be collected either over water or by downward delivery. A gas syringe collects a gas and measures its volume. Every join must be airtight, and the plunger must slide freely. The syringe must hold more than the volume of gas expected. Put the bung in straight after the reactants meet, or some gas escapes and the volume measured is too small.
Chemists have long matched the method to the gas. In the 1770s, the English chemist Joseph Priestley collected gases over mercury instead of water. This let him collect and study gases that dissolve in water, such as ammonia. Today mercury is avoided, because its vapour is poisonous.
Check your understanding
Why is collecting ammonia over water unsuitable?
Show the answer
Ammonia is very soluble in water, so much of it dissolves instead of collecting.
A very soluble gas is lost into the water. Ammonia is less dense than air, so it is collected by upward delivery into an inverted dry container.
Check your understanding
Hydrogen chloride is very soluble in water and denser than air. How should it be collected?
Show the answer
By downward delivery into an upright gas jar
It dissolves in water, so it must push out air instead. It is denser than air, so it sinks into an upright jar and pushes the air up and out.
Watch out for this
A student says: "Oxygen can be collected over water because it is denser than air." What is wrong with this?
Show the answer
Density has nothing to do with collecting over water. Oxygen can be collected over water because it is only slightly soluble in water, so little of it dissolves. Density matters only when a gas pushes out air. A gas denser than air goes into an upright jar; a gas less dense than air goes into an upside-down jar. Examiners report that giving density here was the most common error, when collecting over water depends on solubility.