Lesson 13 of 15
The time constant
I can describe and represent charging/discharging current, charge and p.d. with exponential forms and time constant tau = RC.Syllabus
Syllabus 9478, 16(l). Describe and represent charging/discharging current, charge and p.d. with exponential forms and time constant tau = RC.
After one time constant, τ = RC, a discharging capacitor keeps 37% of its p.d. and a charging one reaches 63% of its final p.d. To find the time for any other fraction, solve the exponential.
Take E = V0 = 10 V, R = 200 kΩ and C = 10 µF, in two separate runs:
Final or starting charge = CV = 100 µC
Starting current = V/R = 50 µA
Charge on the B-side plate
Solid: charging. Dashed: discharging. These are separate experiments with separate time zeros; neither exponential reaches its final limit at a finite time.
Capacitor p.d. between B and C
Solid: charging. Dashed: discharging. These are separate experiments with separate time zeros; neither exponential reaches its final limit at a finite time.
Signed current with one reference direction
Solid: charging, I > 0. Dashed: discharging, I < 0. Both use the same S-to-B reference; these are separate experiments.
| t / s | Charging VC / V | Charging I / µA | Discharging VC / V | Discharging I / µA |
|---|---|---|---|---|
| 0 | 0 | +50 | 10 | -50 |
| 2.0 | 6.32 | +18.4 | 3.68 | -18.4 |
| 4.0 | 8.65 | +6.77 | 1.35 | -6.77 |
At t = τ, e-1 = 0.368 and 1 - e-1 = 0.632. RC is a time: Ω F = (V/A)(C/V) = C/A = s.
Other fractions
Charge to 90%: t = -τ ln 0.10 = 4.61 s
The time constant is not a half-life, and charging is never quite complete. After 5τ it has reached 99.3%.
Doubling R makes τ = 4.0 s and halves the starting current to 25 µA; the final charge stays 100 µC. Doubling C also makes τ = 4.0 s, but the final charge becomes 200 µC and the starting current stays 50 µA.
Charging from zero, the supply gives CE2 = 1.00 mJ. The capacitor stores ½CE2 = 0.500 mJ, and the resistor turns the other 0.500 mJ into heat.
Try it step by step
Work it out in steps: Time constant RC in s, then p.d. after time t, V0 e^(-t/RC), in V.
Show the answer
Problem 1.
Time constant RC in s: RC = 100 x 10-6 x 20 x 103 = 2.0 s
p.d. after time t, V0 e^(-t/RC), in V: V = 12 e^(-1.0/2.0) = 12 x 0.607 = 7.28 V
Problem 2.
Time constant RC in s: RC = 470 x 10-6 x 10 x 103 = 4.7 s
p.d. after time t, V0 e^(-t/RC), in V: V = 9.0 e^(-2.0/4.7) = 9.0 x 0.653 = 5.88 V
Problem 3.
Time constant RC in s: RC = 220 x 10-6 x 50 x 103 = 11 s
p.d. after time t, V0 e^(-t/RC), in V: V = 6.0 e^(-22/11) = 6.0 x 0.1353 = 0.812 V
A real example. Texas Instruments' datasheet for the 555 timer chip says that in its one-shot mode the output pulse lasts about t = 1.1 RC. The capacitor charges through R until its p.d. reaches 2/3 of the supply. That takes t = RC ln 3 = 1.0986 RC, which is the 1.1 RC.
The time constant is not the time to halve. Halving takes τ ln 2 = 0.69τ; after one τ, 37% is left.
Check your understanding
A 10 microfarad capacitor charges through 200 kilohm from a 10 V supply: tau = 2.0 s, final charge 100 microcoulomb and starting current 50 microampere. Which of these is true if only C is doubled?
Show the answer
tau = 4.0 s, final charge 200 microcoulomb, starting current 50 microampere
tau = RC doubles. The final charge is CV, so it doubles too. The starting current is V/R, which does not depend on C.