Lesson 7 of 15
Power from a source
I can explain how source internal resistance affects terminal p.d. and output power.Syllabus
Syllabus 9478, 16(g). Explain how source internal resistance affects terminal p.d. and output power.
Make a guess. You are not marked.
A source has internal resistance 2.0 ohm. Which load resistance takes the most power from it?
Show the answer
2.0 ohm, equal to the internal resistance.
A small load gives a big current but a small p.d.; a large load gives a big p.d. but a small current. The product VI is greatest when R = r.
A source's power, EI, splits between the load, VI, and its internal resistance, I2r. The load gets the most power when its resistance equals the internal resistance.
Use power as the rate of energy transfer:
Pload = VI = I2R
Pinternal = I2r
EI = I2R + I2r
For the same 6.0 V source with r = 1.0 Ω:
| Load R / Ω | I / A | Load power / W | Internal power / W |
|---|---|---|---|
| 5.0 | 1.0 | 5.0 | 1.0 |
| 1.0 | 3.0 | 9.0 | 9.0 |
| 0.25 | 4.8 | 5.76 | 23.04 |
The load power is greatest, 9.0 W, when R = r = 1.0 Ω. With a smaller load, the current is larger, but the terminal p.d. falls so much that the load power drops. Most of the energy then heats the source.
Most power is not most efficient
At R = r, the load and the source get equal power, so only 50% of the source's power is useful. A larger load gets a bigger fraction but less power. With no load at all, no current flows and the terminal p.d. equals E. With the terminals joined by a wire, this source would give 6.0 A and heat itself with 36 W.
A real example. Solar panels are sources too. A 1983 US patent assigned to General Electric describes a controller for a solar array. It keeps adjusting what the inverter draws, so that it takes maximum power from the array. Solar inverters today still track this maximum power point.
Maximum load power is at R = r, not at the largest current. A short circuit gives the largest current but no useful power at all.
Check your understanding
A discharging source has e.m.f. 6.0 V and internal resistance 1.0 ohm. It supplies a 1.0 ohm external load. What is the power account?
Show the answer
The load receives 9 W and the internal resistance receives 9 W.
I = 6.0/(1.0 + 1.0) = 3.0 A. Each 1.0 ohm resistance receives I2 R = 9 W, summing to the 18 W source conversion.