8867 / 2027
Quantities and Measurement overview

Lesson 10 of 11

Resolving a vector into components

  • I can represent a vector as two perpendicular components.Syllabus

    Syllabus 8867, 1(j). Represent a vector as two perpendicular components.

Any vector can be split into two parts at right angles, called components. The component next to the given angle uses cos; the other uses sin.

The vector is the long side of a right-angled triangle. Its two components are the other two sides. Together they have exactly the same effect as the vector.

Worked resolution

A 10.0 N force at 30.0°

Take right as +x and up as +y. The force points 30.0° above the horizontal.

Fx = 10.0 cos 30.0° = +8.66 N.
Fy = 10.0 sin 30.0° = +5.00 N.

The same force is 60.0° from the vertical. Measured from there, Fx = 10.0 sin 60.0° and Fy = 10.0 cos 60.0°. The answers are the same.

A 10.0 N force at 150° from +x points left and up. Its components are Fx = -8.66 N and Fy = +5.00 N.

Resolve one force into perpendicular components

Purple is a 10.0 N force. The green arrows are its horizontal and vertical components, drawn head to tail. They replace the force; they are not extra forces.

One direction, two angle references

One direction, two angle referencesA 10.0 N force at 30 degrees above +x, which is 60 degrees from +y. Its components are +8.66 N across and +5.00 N up.0246810246810+y / N+x / N10.0 NFx = +8.66 NFy+5.00 N30°60°

From the horizontal: Fx = 10.0 cos 30° and Fy = 10.0 sin 30°. From the vertical: Fx = 10.0 sin 60° and Fy = 10.0 cos 60°. Both give the same components.

Check: (8.66 N)2 + (5.00 N)2 = 100 N2, so the components rebuild the 10.0 N force.

The horizontal component is negative

The horizontal component is negativeA 10.0 N force at 150 degrees from +x, which is 30 degrees above -x. Its components are -8.66 N across and +5.00 N up.-10-8-6-4-20246810+y / N+x / N10.0 NFx = -8.66 NFy+5.00 N30°

This force is 150° from +x, or 30° above -x. Its components are (-8.66, +5.00) N: left and up.

Find which line the angle is measured from before you choose sin or cos. Signs come from the directions of the axes.

Try it step by step

Work it out in steps: Horizontal component F cos theta in N, then Vertical component F sin theta in N.

  1. Problem 1. A force of 10.0 N acts at 30.0 degrees above the horizontal. Find its horizontal and vertical components.
  2. Problem 2. A force of 25 N acts at 60 degrees above the horizontal. Find its horizontal and vertical components.
  3. Problem 3. A force of 40 N acts at 25 degrees above the horizontal. Find its horizontal and vertical components.
Show the answer

Problem 1.

Horizontal component F cos theta in N: 10.0 x cos 30.0 = 8.66 N

Vertical component F sin theta in N: 10.0 x sin 30.0 = 5.00 N

Problem 2.

Horizontal component F cos theta in N: 25 x cos 60 = 12.5 N

Vertical component F sin theta in N: 25 x sin 60 = 21.7 N (3 sf)

Problem 3.

Horizontal component F cos theta in N: 40 x cos 25 = 36.3 N (3 sf)

Vertical component F sin theta in N: 40 x sin 25 = 16.9 N (3 sf)

A real example. The 2010 ADA Standards for Accessible Design in the United States say a ramp may be no steeper than 1 in 12. That slope is tan-1(1/12) = 4.76°. For a wheelchair and rider of 100 kg, the weight is 981 N. Its part along the ramp is 981 sin 4.76° = 81 N. That is the force needed to push them up at a steady speed, ignoring friction. The part into the ramp is 981 cos 4.76° = 978 N.

Triangle facts you use

Angles and similar triangles

The angles in a triangle add up to 180°. In the triangle for the force at 30°, the third angle is 180° - 90° - 30° = 60°. That is why the force is also 60° from the vertical.

Triangles with the same angles are similar: all their sides scale by one factor. A 5.00 N force at the same 30° has a triangle half the size. Its components are 0.500 × 8.66 = 4.33 N and 0.500 × 5.00 = 2.50 N.

Components replace the vector; they are not extra forces. On a free-body diagram, show either the force or its two components, never both.

To rebuild a vector from its components, use magnitude = √(Fx2 + Fy2). This works because sin2θ + cos2θ = 1. Then use the signs to find the quarter of the plane it points into. For (-8.66, +5.00) N, the direction is 30° above the -x axis, which is 150° from +x.

Check your understanding

A 20 N force points to the left and 30 degrees below the horizontal. Taking right and up as positive, which of these are its components?

  1. (-10.0 N, -17.3 N)
  2. (+17.3 N, -10.0 N)
  3. (-17.3 N, -10.0 N)
Show the answer

(-17.3 N, -10.0 N)

Horizontal: 20 cos 30 = 17.3 N, to the left, so negative. Vertical: 20 sin 30 = 10.0 N, downwards, so negative.