8867 / 2027
Quantities and Measurement overview

Lesson 2 of 11

Derived units and homogeneity

  • I can express derived units using SI base units and use named units in their physical contexts.Syllabus

    Syllabus 8867, 1(c). Express derived units using SI base units and use named units in their physical contexts.

  • I can use SI base units to check the homogeneity of physical equations.Syllabus

    Syllabus 8867, 1(d). Use SI base units to check the homogeneity of physical equations.

Make a guess. You are not marked.

A pendulum's period is T = 2 pi sqrt(l / g), with l in m and g in m s-2. What are the base units of sqrt(l / g)?

  1. m s-1, because a length divided by an acceleration gives a speed.
  2. Seconds, because m divided by m s-2 leaves s2.
  3. Metres, because l is a length measured in m.
Show the answer

Seconds, because m divided by m s-2 leaves s2.

l / g has units m / (m s-2) = s2. Its square root has units of s, which matches a period, as it should for a correct equation.

A derived unit is made by multiplying and dividing base units. To find one, put units in place of the quantities in a defining equation, then simplify.

Acceleration is change in velocity per unit time. So its unit is (m/s)/s = m s-2. A negative power means divide: s-2 means 1/s2.

Force: the newton, N
F = ma, so N = kg m s-2.
Work and energy: the joule, J
Work = force × distance moved in the direction of the force. So J = N m = kg m2 s-2.
Power: the watt, W
Power is energy per unit time. So W = J/s = kg m2 s-3.
Charge: the coulomb, C
Q = It, so C = A s.
Potential difference: the volt, V
V = W/Q, energy per unit charge. So V = J/C = kg m2 s-3 A-1.
Pressure: the pascal, Pa
p = F/A, force per unit area. So Pa = N/m2 = kg m-1 s-2.

Exam papers may also use the standard atmosphere, atm, without explaining it. It is defined as exactly 1 atm = 101 325 Pa.

Read each letter in its context. In p = F/A, A stands for area. After a number, as in 2.0 A, it is the unit ampere.

A real example. NASA lost the Mars Climate Orbiter at Mars on 23 September 1999. One ground software file gave thruster impulse in pound-force seconds. The navigation team expected newton seconds. Since 1 pound-force is 4.45 N, the small thruster effects were read as 4.45 times too small. The craft flew far too low and was lost.

Homogeneity: every term must have the same units

An equation is homogeneous when both sides have the same base units. Every term that is added or subtracted must have those units too. Write each term in base units to check.

Checking an equation

Displacement, velocity and acceleration

Check s = ut + ½at2. Here s is displacement, u is initial velocity, a is acceleration and t is time. Do not mix up the quantity s with the unit s for second.

  • s has units m.
  • ut has units (m s-1)(s) = m.
  • ½at2 has units (m s-2)(s2) = m. The ½ has no unit.

Every term is in metres, so the equation is homogeneous. Now try s = ut + at. The term at has units m s-1, a speed. You cannot add a speed to a length, so that equation is wrong.

A unit check cannot prove an equation is right. s = ut + at2 is also homogeneous, but it is wrong. Units cannot find a number like ½, because numbers have no unit.

The same idea gives one more rule. Whatever goes inside sin, cos, a power of e or a logarithm must have no unit.

Check your understanding

Which of these is the joule written in SI base units?

  1. kg m s-2
  2. kg m2 s-2
  3. kg m2 s-3
Show the answer

kg m2 s-2

Work = force x distance, so J = N m. The newton is kg m s-2, so J = (kg m s-2)(m) = kg m2 s-2.

Check your understanding

In the proposed equation s = ut + at2, s is displacement, u is velocity, a is acceleration and t is time. What does a unit check establish?

  1. The equation is homogeneous, but its physical correctness is not established.
  2. The equation is not homogeneous because it lacks a factor of 1/2.
  3. The equation is physically correct because all terms have units of length.
Show the answer

The equation is homogeneous, but its physical correctness is not established.

ut has units (m/s)s = m, and at2 has units (m/s2)s2 = m. The check cannot determine a dimensionless coefficient or prove the motion model.