Lesson 2 of 9
Calculating pressure
I can apply pressure = force / area to new situations.Syllabus
Syllabus K323, 5(b). Apply pressure = force / area to new situations.
Make a guess. You are not marked.
A box presses on a floor with a force of 20 N over an area of 400 cm2. A student divides 20 by 400 and writes 0.05 Pa. What is the pressure in pascals?
Show the answer
500 Pa, because 400 cm2 is 0.04 m2.
400 cm2 x 0.0001 = 0.04 m2. Then p = 20 / 0.04 = 500 Pa. The student's 0.05 is in N/cm2, not in Pa.
To get a pressure in pascals, use the force in newtons and the area in square metres.
Pressure is p = F / A, where F is the force at right angles to the surface. A weight W = mg is a force.
Square units
1 m = 100 cm, so 1 m2 = 100 x 100 = 10 000 cm2. That means 1 cm2 = 0.0001 m2.
The same block on two faces
A block of weight 30 N rests on a floor. Whichever face it rests on, it pushes down on the floor with 30 N.
Same block, different contact face
The block is 15 cm x 10 cm x 5 cm. Its weight is 30 N both times.
On the 15 cm x 10 cm face
Contact area = 15 x 10 = 150 cm2
150 cm2 = 0.015 m2
Average pressure = 30 / 0.015 = 2000 Pa.
On the 10 cm x 5 cm face
Contact area = 10 x 5 = 50 cm2
50 cm2 = 0.0050 m2
Average pressure = 30 / 0.0050 = 6000 Pa.
The force stays the same. A third of the area gives three times the pressure.
Worked comparison
Same force, different areas
First change the areas to m2:
- 150 cm2 = 150 x 0.0001 = 0.015 m2.
- 50 cm2 = 50 x 0.0001 = 0.0050 m2.
| Contact area | Pressure |
|---|---|
| 0.015 m2 | p = 30 / 0.015 = 2000 Pa |
| 0.0050 m2 | p = 30 / 0.0050 = 6000 Pa |
The area is a third as big, so the pressure is three times as big. The block's weight has not changed.
Use only the area of the face that touches the floor. Dividing 30 N by 150 cm2 gives 0.20 N/cm2. That is a pressure, but it is not 0.20 Pa.
Finding a pressure from measurements
- Measure the block's mass on a balance, and find its weight: W = mg.
- Measure the two sides of the face it rests on, multiply them, and change the area to m2.
- Divide the weight by the area.
A 3.0 kg block has a weight of 3.0 x 10 = 30 N. It rests on its 15 cm by 10 cm face, which is 0.015 m2. So p = 30 / 0.015 = 2000 Pa.
Worked example
Find a force from a pressure
A pad presses with a pressure of 1500 Pa on an area of 0.020 m2. What force does it exert?
- Rearrange p = F / A: F = pA.
- Substitute: F = 1500 x 0.020 = 30 N.
To find an area instead, use A = F / p.
Change cm2 to m2 before you divide. 1 cm = 0.01 m, but you must square it: 1 cm2 = 0.0001 m2, not 0.01 m2.
Try it step by step
Work it out in steps: Weight of the object in N, then Base area in m2, then Pressure in Pa.
Show the answer
Problem 1.
Weight of the object in N: W = mg = 20 x 10 = 200 N
Base area in m2: A = 0.50 x 0.40 = 0.20 m2
Pressure in Pa: p = F / A = 200 / 0.20 = 1000 Pa (2 sf)
Problem 2.
Weight of the object in N: W = mg = 45 x 10 = 450 N
Base area in m2: A = 0.30 x 0.50 = 0.15 m2
Pressure in Pa: p = 450 / 0.15 = 3000 Pa (2 sf)
Problem 3.
Weight of the object in N: W = mg = 12 x 10 = 120 N
Base area in m2: A = 0.20 x 0.30 = 0.060 m2
Pressure in Pa: p = 120 / 0.060 = 2000 Pa (2 sf)