K323 / 2027
Pressure overview

Lesson 6 of 9

Total pressure at a depth

  • I can apply liquid-column pressure = height x density x gravitational field strength to new situations.Syllabus

    Syllabus K323, 5(e). Apply liquid-column pressure = height x density x gravitational field strength to new situations.

The total pressure at a point in a liquid is the pressure on the liquid's surface plus ρgh.

In a stationary liquid, the pressure increase below the surface is ρgh, where h is the vertical depth.

Extra pressure and total pressure are different

The liquid contribution ρgh is an increase below the surface. There may already be pressure acting on that surface. For an open container, the surrounding atmosphere supplies that surface pressure.

Worked example

Water 0.80 m below an open surface

Use the supplied values: water density 1000 kg/m3, g = 10 N/kg and atmospheric pressure at the surface of 101000 Pa.

  1. Find the liquid contribution: Δp = 1000 x 10 x 0.80 = 8000 Pa.
  2. Add the surface pressure: p = 101000 + 8000 = 109000 Pa.

8000 Pa is the difference between the surface and the point. 109000 Pa is the total pressure there. Any point at the same depth in this connected water has the same total pressure.

Try it step by step

Work it out in steps: Depth in metres, then Pressure increase from the liquid in Pa, then Total pressure in Pa.

  1. Problem 1. A point is 60 cm below the open surface of oil of density 800 kg/m3. Atmospheric pressure at the surface is 100000 Pa and g = 10 N/kg. Find the total pressure at the point.
  2. Problem 2. A diver is 2.5 m below the surface of sea water of density 1030 kg/m3. Atmospheric pressure at the surface is 101000 Pa and g = 10 N/kg. Find the total pressure on the diver.
  3. Problem 3. A point is 45 cm below the open surface of water of density 1000 kg/m3. Atmospheric pressure at the surface is 100000 Pa and g = 10 N/kg. Find the total pressure at the point.
Show the answer

Problem 1.

Depth in metres: h = 60 cm = 0.60 m

Pressure increase from the liquid in Pa: change in p = rho g h = 800 x 10 x 0.60 = 4800 Pa

Total pressure in Pa: p = 100000 + 4800 = 104800 Pa, which is 105000 Pa to 3 sf

Problem 2.

Depth in metres: h = 2.5 m, already in metres

Pressure increase from the liquid in Pa: change in p = 1030 x 10 x 2.5 = 25750 Pa

Total pressure in Pa: p = 101000 + 25750 = 126750 Pa, which is 127000 Pa to 3 sf

Problem 3.

Depth in metres: h = 45 cm = 0.45 m

Pressure increase from the liquid in Pa: change in p = 1000 x 10 x 0.45 = 4500 Pa

Total pressure in Pa: p = 100000 + 4500 = 104500 Pa, which is 105000 Pa to 3 sf

Pressure at depth = surface pressure + ρghAt the surface, h = 0: the liquid contribution is zero, but the surface pressure need not be zero.

For the same liquid and g, doubling depth doubles the liquid contribution. It does not double the total pressure when the surface pressure stays unchanged. At a fixed depth, a denser liquid gives a larger pressure increase.

Divers use this. In sea water of density 1030 kg/m3, every 10 m of depth adds 1030 x 10 x 10 = 103 000 Pa. That is about one more atmosphere. A diver 10 m down is under about twice the pressure at the surface, not ten times.

Identify the requested pressure before calculating. ρgh gives a pressure difference. Add the stated surface pressure when the question asks for total pressure; do not silently assume an open surface has zero pressure.

Check your understanding

A water-filled tube runs 1.0 m along a slope from its open surface to point P. P is only 0.50 m vertically below that surface. Use water density 1000 kg/m3, g = 10 N/kg and surface pressure 100000 Pa. What is the total pressure at P?

  1. 5000 Pa
  2. 110000 Pa
  3. 105000 Pa
Show the answer

105000 Pa

Use the vertical depth: the increase is 1000 x 10 x 0.50 = 5000 Pa. Add the supplied surface pressure: 100000 + 5000 = 105000 Pa.

Practise an exam question

Write your answer first, then tick the mark points it makes.

Exam-style question

A diver swims 12 m below the surface of the sea. The density of sea water is 1030 kg/m3, g = 10 N/kg and atmospheric pressure is 1.0 x 105 Pa. Calculate the total pressure on the diver. [4]

Saved on this browser only. Anyone using this browser can see it.