K223 / K224 / 2027
Force and pressure overview

Lesson 6 of 6

Calculating pressure

  • I can apply pressure = force / area to new situations.Syllabus

    Syllabus K223 / K224, 3(i). Apply pressure = force / area to new situations.

Make a guess. You are not marked.

A box presses on a floor with a force of 20 N over an area of 400 cm2. A student divides 20 by 400 and writes 0.05 Pa. What is the pressure in pascals?

  1. 500 Pa, because 400 cm2 is 0.04 m2.
  2. 5 Pa, because 400 cm2 is 4 m2.
  3. 0.05 Pa, because 20 / 400 = 0.05.
Show the answer

500 Pa, because 400 cm2 is 0.04 m2.

400 cm2 x 0.0001 = 0.04 m2. Then p = 20 / 0.04 = 500 Pa. The student's 0.05 is in N/cm2, not in Pa.

In short

  • Use the force in N and the area in m2 to get pascals.
  • 1 cm2 = 0.0001 m2.

To get a pressure in pascals, use the force in newtons and the area in square metres.

Pressure is p = F / A, where F is the force at right angles to the surface. A weight W = mg is a force.

Square units

1 m = 100 cm, so 1 m2 = 100 x 100 = 10 000 cm2. That means 1 cm2 = 0.0001 m2.

The same block on two faces

A block of weight 30 N rests on a floor. Whichever face it rests on, it pushes down on the floor with 30 N.

Same block, different contact face

The block is 15 cm x 10 cm x 5 cm. Its weight is 30 N both times.

On the 15 cm x 10 cm face

A 30 N block on a 150 square centimetre contact faceThe block rests on its 15 centimetre by 10 centimetre face, an area of 150 square centimetres. It pushes down on the floor with 30 N. The pressure is 30 newtons divided by 0.015 square metres, which is 2000 pascals.Side viewFloor5 cm30 Non floorContact face, viewed from below150 cm215 cm10 cm

Contact area = 15 x 10 = 150 cm2

150 cm2 = 0.015 m2

Average pressure = 30 / 0.015 = 2000 Pa.

On the 10 cm x 5 cm face

A 30 N block on a 50 square centimetre contact faceThe block rests on its 10 centimetre by 5 centimetre face, an area of 50 square centimetres. It pushes down on the floor with 30 N. The pressure is 30 newtons divided by 0.0050 square metres, which is 6000 pascals.Side viewFloor15 cm30 Non floorContact face, viewed from below50 cm210 cm5 cm

Contact area = 10 x 5 = 50 cm2

50 cm2 = 0.0050 m2

Average pressure = 30 / 0.0050 = 6000 Pa.

The force stays the same. A third of the area gives three times the pressure.

The block rests first on its 15 cm x 10 cm face, then on its 10 cm x 5 cm face. The force on the floor is 30 N both times.

Worked comparison

Same force, different areas

First change the areas to m2:

  • 150 cm2 = 150 x 0.0001 = 0.015 m2.
  • 50 cm2 = 50 x 0.0001 = 0.0050 m2.
The force is 30 N in both cases
Contact areaPressure
0.015 m2p = 30 / 0.015 = 2000 Pa
0.0050 m2p = 30 / 0.0050 = 6000 Pa

The area is a third as big, so the pressure is three times as big. The block's weight has not changed.

Use only the area of the face that touches the floor. Dividing 30 N by 150 cm2 gives 0.20 N/cm2. That is a pressure, but it is not 0.20 Pa.

Finding a pressure from measurements

  1. Measure the block's mass on a balance, and find its weight: W = mg.
  2. Measure the two sides of the face it rests on, multiply them, and change the area to m2.
  3. Divide the weight by the area.

A 3.0 kg block has a weight of 3.0 x 10 = 30 N. It rests on its 15 cm by 10 cm face, which is 0.015 m2. So p = 30 / 0.015 = 2000 Pa.

Worked example

Find a force from a pressure

A pad presses with a pressure of 1500 Pa on an area of 0.020 m2. What force does it exert?

  1. Rearrange p = F / A: F = pA.
  2. Substitute: F = 1500 x 0.020 = 30 N.

To find an area instead, use A = F / p.

Change cm2 to m2 before you divide. 1 cm = 0.01 m, but you must square it: 1 cm2 = 0.0001 m2, not 0.01 m2.

Try it step by step

Work it out in steps: Weight of the object in N, then Base area in m2, then Pressure in Pa.

  1. Problem 1. A crate of mass 20 kg stands on its base, which measures 0.50 m by 0.40 m. Take g = 10 N/kg. Find the pressure the crate exerts on the floor.
  2. Problem 2. A cabinet of mass 45 kg stands on a base 0.30 m by 0.50 m. Take g = 10 N/kg. Find the pressure on the floor.
  3. Problem 3. A box of mass 12 kg stands on a base 0.20 m by 0.30 m. Take g = 10 N/kg. Find the pressure on the floor.
Show the answer

Problem 1.

Weight of the object in N: W = mg = 20 x 10 = 200 N

Base area in m2: A = 0.50 x 0.40 = 0.20 m2

Pressure in Pa: p = F / A = 200 / 0.20 = 1000 Pa (2 sf)

Problem 2.

Weight of the object in N: W = mg = 45 x 10 = 450 N

Base area in m2: A = 0.30 x 0.50 = 0.15 m2

Pressure in Pa: p = 450 / 0.15 = 3000 Pa (2 sf)

Problem 3.

Weight of the object in N: W = mg = 12 x 10 = 120 N

Base area in m2: A = 0.20 x 0.30 = 0.060 m2

Pressure in Pa: p = 120 / 0.060 = 2000 Pa (2 sf)