Chapter revision
Revision summary
Key ideas, equations and common mistakes. Open any topic below for the full explanation.
Heating and power
Kettles, ovens and heaters use the heating effect of a current in a high-resistance element. The charge transfers energy to the element, which heats the water, food or air. The current is not used up.
- Power: P = VI
- P in watts (1 W = 1 J/s). V is the p.d. across the part and I the current through it.
- Energy: E = Pt = VIt
- t in seconds gives E in joules.
- Units
- 1 kW = 1000 W; 1 min = 60 s; 1 h = 3600 s.
Measuring power
Put an ammeter in series with the part and a voltmeter across it. Use a low-voltage supply, read both meters at the same time and time the current. P = V x I, not V / I.
Kilowatt-hours and cost
Energy in kW h = power in kW x time in h. 1 kW h = 3 600 000 J. Cost = energy in kW h x price per kW h. For example, 1.15 kW for 0.20 h is 0.230 kW h, which costs 6.9 cents at $0.30 per kW h.
The three wires and the plug
- Live: brown, at a high voltage; joined to L through the fuse.
- Neutral: blue, completes the circuit, close to 0 V.
- Earth: green and yellow, joins a metal case to the ground; no current unless there is a fault.
- Cable grip: clamps the outer sheath so a pull does not loosen the wires.
Switches and fuses in live
Opening a switch, fuse or circuit breaker in live cuts the appliance off from the high voltage. In neutral, it stops the current but leaves the appliance at the live voltage. Lamps and sockets in a home are in parallel, so each gets 230 V and works on its own.
Dangers of electricity
- Damaged insulation: a bare live wire can give a shock or make a metal case live.
- Overheating cables: too much current can melt insulation and start a fire.
- Damp conditions: water conducts and wet skin has a low resistance, so a larger current flows through a person.
Fuses and circuit breakers
A fuse melts when the current is too large. Choose the smallest rating above the normal current, I = P/V. A circuit breaker opens by itself and can be reset after the fault is fixed.
Earthing and double insulation
If live touches an earthed metal case, a large current flows through the low-resistance earth wire. The fuse in live melts and cuts off the supply. A double-insulated appliance has two layers of insulation, needs no earth wire and is labelled as double insulated.
Back to electrical heating and powerPractise exam questions
Write your answer first, then tick the mark points it makes.
Exam-style question
A 2.0 kW heater is used for 3.0 hours each day for 30 days. Electricity costs 30 cents per kW h. Calculate the energy used in kW h and the total cost. [3]
Saved on this browser only. Anyone using this browser can see it.
Exam-style question
An electric kettle is rated 2200 W, 230 V. Fuses of 3 A, 5 A and 13 A are available. Calculate the normal current in the kettle and choose the most suitable fuse. Explain why the other two are not suitable. [3]
Saved on this browser only. Anyone using this browser can see it.
Exam-style question
A washing machine has a metal case connected to the earth wire. A fault makes the live wire touch the case. Explain how the earth wire and the fuse together protect a person who then touches the case. [3]
Saved on this browser only. Anyone using this browser can see it.
Exam-style question
Data-based question: Choosing a kettle [8]
A family compares three kettles. For each one they boil 1.0 L of water, starting from tap temperature, and time how long it takes. Electricity costs $0.30 per kW h.
| kettle | power / W | time to boil / s |
|---|---|---|
| A | 2200 | 150 |
| B | 3000 | 115 |
| C | 1800 | 190 |
- (a) Calculate the energy kettle A uses to boil 1.0 L of water. Give your answer in J. [2]
- (b) Convert your answer to (a) into kW h. [1]
- (c) The family boils 1.0 L five times a day. Calculate the daily cost of using kettle A. [2]
- (d) State one assumption you made in (c). [1]
- (e) A salesperson says: "Kettle B costs the most to run because it has the highest power." Use the data to evaluate this claim. [2]
Saved on this browser only. Anyone using this browser can see it.
Quick recall
A heater element takes a current of 5.0 A from the live wire. What is the current in the neutral wire that leaves the element?
Review a topic
- Electrical heating and power
- Measuring electrical power
- Energy use and cost
- Live, neutral, earth and the plug
- Why switches and fuses go in the live wire
- Dangers of electricity
- Fuses and circuit breakers
- Earthing and double insulation