K223 / K224 / 2027
D.C. circuits overview

Lesson 4 of 7

Parallel circuits

  • I can state and apply the sum of parallel branch currents.Syllabus

    Syllabus K223 / K224, 11(d). State and apply the sum of parallel branch currents.

  • I can state and apply the equal potential difference across parallel branches.Syllabus

    Syllabus K223 / K224, 11(e). State and apply the equal potential difference across parallel branches.

  • I can recall and apply effective resistance for a number of resistors in series and in parallel.Syllabus

    Syllabus K223 / K224, 11(f). Recall and apply effective resistance for a number of resistors in series and in parallel.

Make a guess. You are not marked.

One lamp is connected across a cell. A second identical lamp is now connected in parallel with the first. What happens to the current drawn from the cell?

  1. It stays the same.
  2. It halves.
  3. It doubles.
Show the answer

It doubles.

Each lamp still has the full cell p.d. across it, so each draws the same current as before. The cell now supplies both currents, twice as much in total.

In short

  • In parallel, each branch has the same p.d.
  • The branch currents add up to the main current.
  • Adding a branch lowers the total resistance.

Parallel branches are joined to the same two points, so they have the same p.d. Their currents add up to the current going into the group.

Follow the connections, not the shape of the drawing. Branches are parallel only if each one starts and ends at the same two nodes.

V1 = V2 = ... = VgroupEach branch is across the same two points. If the group is straight across the supply, Vgroup = Vs.

The current splits at one junction and joins up again at the other. No charge is lost or gained at a junction. So the current going in equals the sum of the branch currents.

This rule is called Kirchhoff's current law. The German scientist Gustav Kirchhoff described it in 1845.

Itotal = I1 + I2 + ...With the same p.d., a smaller resistance carries a larger current. The current need not split equally.

Each branch joins the same two points

The cell keeps 6.0 V across both branches. Both branches carry a current. The arrow lengths do not show the size of the current.

The same two resistors, joined across the same two points

The same two resistors, joined across the same two pointsAn ideal 6.0 V cell is joined to A and C. A 2.0 ohm resistor and a 4.0 ohm resistor each join A to C, so each has 6.0 V across it. The upper branch carries 3.0 A and the lower branch 1.5 A, both from A towards C. The cell's current is 4.5 A. No plain wire joins A straight to C.+-6.0 VAC2.0 ohm4.0 ohm4.5 A3.0 A; 6.0 V1.5 A; 6.0 VThe current splits, then joins up again

The combined resistance is 4/3 ohm, about 1.33 ohm. In series, the same two resistors gave 6.0 ohm.

The 2.0 Ω and 4.0 Ω resistors are now joined in parallel across 6.0 V. Each branch has the full 6.0 V. Their currents are 3.0 A and 1.5 A, so 4.5 A flows in the main wire.

The same two resistors, joined differently

2.0 Ω and 4.0 Ω in parallel across 6.0 V

  • Current in 2.0 Ω = 6.0/2.0 = 3.0 A.
  • Current in 4.0 Ω = 6.0/4.0 = 1.5 A.
  • Total current = 3.0 + 1.5 = 4.5 A.

Both branches carry a current. The combined resistance is Vs/Itotal = 6.0/4.5 = 4/3 Ω, about 1.33 Ω.

Find the combined resistance

Each branch current is the shared p.d. divided by that branch's resistance. Adding them gives Itotal = V/R1 + V/R2 + ... . Since Itotal = V/Rparallel, dividing through by V gives the rule below.

1/Rparallel = 1/R1 + 1/R2 + ...Add the reciprocals, then take the reciprocal of the sum. The reciprocal of a number is 1 divided by it.

For exactly two resistors, this becomes Rparallel = R1R2/(R1 + R2). The reciprocal rule also works for three or more branches.

Three parallel branches

6 Ω, 12 Ω and 4 Ω

1/R = 1/6 + 1/12 + 1/4 = 2/12 + 1/12 + 3/12 = 6/12 = 1/2, so R = 2 Ω.

Across 6 V, the branch currents are 1.0 A, 0.50 A and 1.5 A. They add up to 3.0 A, which agrees with 6 V / 2 Ω.

Try it step by step

Work it out in steps: Current in the smaller resistor in A, then Current in the larger resistor in A, then Total current in A, then Combined resistance in ohm.

  1. Problem 1. A 3.0 ohm resistor and a 6.0 ohm resistor are connected in parallel across a 6.0 V supply. Find the total current and the combined resistance.
  2. Problem 2. A 4.0 ohm resistor and a 12 ohm resistor are in parallel across a 12 V supply. Find the total current and the combined resistance.
  3. Problem 3. A 5.0 ohm resistor and a 20 ohm resistor are in parallel across a 10 V supply. Find the total current and the combined resistance.
Show the answer

Problem 1.

Current in the smaller resistor in A: I1 = 6.0 / 3.0 = 2.0 A

Current in the larger resistor in A: I2 = 6.0 / 6.0 = 1.0 A

Total current in A: I = 2.0 + 1.0 = 3.0 A

Combined resistance in ohm: R = V / I = 6.0 / 3.0 = 2.0 ohm (check: 1/3 + 1/6 = 1/2)

Problem 2.

Current in the smaller resistor in A: I1 = 12 / 4.0 = 3.0 A

Current in the larger resistor in A: I2 = 12 / 12 = 1.0 A

Total current in A: I = 3.0 + 1.0 = 4.0 A

Combined resistance in ohm: R = 12 / 4.0 = 3.0 ohm (2 sf)

Problem 3.

Current in the smaller resistor in A: I1 = 10 / 5.0 = 2.0 A

Current in the larger resistor in A: I2 = 10 / 20 = 0.50 A

Total current in A: I = 2.0 + 0.50 = 2.5 A

Combined resistance in ohm: R = 10 / 2.5 = 4.0 ohm (2 sf)

The combined resistance is always smaller than the smallest branch. An extra branch gives the current another path, so more current flows for the same p.d. When a branch is opened shows what happens the other way round.

Take the reciprocal at the end. If 1/R = 1/2, then R = 2 Ω, not 0.5 Ω. Check that your answer is smaller than the smallest branch.

Check your understanding

Fixed 3.0 ohm and 6.0 ohm resistors are connected directly in parallel across an ideal 6.0 V source. What current does the source supply?

  1. 3.0 A
  2. 0.667 A
  3. 2.0 A
Show the answer

3.0 A

Each branch has 6.0 V. Their currents are 6.0/3.0 = 2.0 A and 6.0/6.0 = 1.0 A, so the source supplies 2.0 + 1.0 = 3.0 A.