Lesson 1 of 7
Circuit symbols
I can draw circuit diagrams using every component and source listed for this course.Syllabus
Syllabus K223 / K224, 11(a). Draw circuit diagrams using every component and source listed for this course.
Make a guess. You are not marked.
A circuit diagram shows a resistor symbol with an arrow drawn through it. What does the arrow mean?
Show the answer
The resistance can be changed: it is a variable resistor.
The arrow through the box is part of the symbol for a variable resistor. Turning a knob or sliding a contact changes its resistance.
In short
- Use the standard symbols for cells, lamps, resistors, switches and meters.
- On a cell symbol, the longer line is the positive terminal.
- An arrow through a resistor means that its resistance can be changed.
A circuit diagram uses standard symbols to show each component and how the parts are joined.
Current is the charge passing a point each second, in amperes. P.d. is the energy transferred per coulomb between two points, in volts.
Draw the connecting wires as straight lines. The symbols are agreed around the world. The International Electrotechnical Commission (IEC) publishes them in its standard IEC 60617.
Direct current (d.c.) flows in one direction. The circuits in this chapter use steady d.c.: the current does not change while you take a reading.
Know each symbol and what it does
Each card gives a symbol, its name and its job. The light arrows on an LED point out.
Cell
Gives energy to the charge. The longer line is positive.
Battery
Two or more cells joined together.
Switch
Opens or closes the circuit. Shown open.
Lamp
Gives out light, and warms up as it does.
LED
Gives out light when current flows the right way. The bar marks the cathode, K.
Fixed resistor
Adds a fixed resistance to the circuit.
Variable resistor
Its resistance can be changed. The arrow is not a current arrow.
Fuse
A thin wire that melts and breaks the circuit if the current is too large.
Ammeter
Measures the current. Connect it in series.
Voltmeter
Measures the p.d. between two points. Connect it in parallel.
For a cell, the longer line is the positive terminal and the shorter line is the negative terminal. A battery is two or more cells joined together. Mark + and - whenever the direction of the current matters.
A variable resistor has a resistance that you can change. The arrow through it is part of the symbol, not a current arrow. A switch opens or closes a path. A fuse is a thin wire that melts and breaks the circuit if the current is too large for too long.
An LED is a light-emitting diode. It lights when the current flows through it the right way: in at the triangle side and out at the bar. The small arrows pointing out show the light it gives out. A real LED needs a resistor in series to keep its current small enough.
An arrow on a symbol is not a current arrow. The arrow through a variable resistor means it can be adjusted. The arrows on an LED or an LDR show light. Draw current arrows beside the wires.
Check your understanding
Which of these is true of the circuit symbol for a cell?
Show the answer
The longer line is the positive terminal.
In the cell symbol, the longer line marks the positive terminal and the shorter line marks the negative terminal.