K224 / K225 / 2027

Lesson 11 of 13 / Nutrition and transport in flowering plants

Read values and rates from a graph

How do you turn a line on a graph into a rate?

I can read values from a graph with construction lines and find a rate from the gradient of a line or a tangent.

  • I can investigate and explain four environmental effects on transpiration and wilting.Syllabus

    Syllabus K224 / K225, Topic 8(k). Investigate and explain four environmental effects on transpiration and wilting.

About 5 min

Make a guess. You are not marked.

A bubble moves quickly at first and then slows down, so the graph is a curve. How do you find the rate at exactly 4 minutes?

  1. Read the distance at 4 minutes from the graph.
  2. Draw a tangent at 4 minutes and find its gradient.
  3. Divide the distance at 4 minutes by 4.
Show the answer

Draw a tangent at 4 minutes and find its gradient.

A tangent just touches the curve at that time. Its gradient is the rate at that moment.

The key idea

Read a value with dashed construction lines and quote it with its unit. The rate is the gradient: the change in y divided by the change in x. For a curve, use the gradient of a tangent.

A gradient is the steepness of a line: the change in y divided by the change in x.

How do you get a value or a rate from the line?
024681001020304050Time / minDistance moved by bubble / mm

Invented readings, not measured data. The dashed lines are the working an examiner expects to see on your graph.

Explanation

A graph lets you read values that are not in the table. To read a value, draw a dashed line up from the x-axis to your line. Then draw across to the y-axis. Give the value with its unit, such as 27 mm at 6 min.

Read only between your plotted points, unless the question tells you to extend the line.

On a graph of distance against time, the gradient is the rate. For a straight line, pick two points on the line that are far apart. Divide the change on the y-axis by the change on the x-axis. A line from (2 min, 9 mm) to (10 min, 45 mm) gives (45 - 9) / (10 - 2) = 4.5 mm/min. The unit of a rate comes from both axes.

If the line curves, the rate keeps changing. To find the rate at one time, draw a tangent: a ruled line that just touches the curve at that point. Then find the gradient of the tangent. A tangent through (0 min, 4 mm) and (8 min, 20 mm) gives (20 - 4) / (8 - 0) = 2.0 mm/min.

Step by step
  1. 1

    Read

    Rule construction lines from one axis to the line and across to the other axis.

  2. 2

    Draw a triangle

    Pick two points far apart on the line or tangent and read both coordinates.

  3. 3

    Divide

    Change in y divided by change in x, with a unit such as mm/min.

Worked example

Two runs compared

Two best-fit lines for invented potometer readings start at (0 min, 0 mm). The still-air line ends at (10 min, 25 mm). The fan line ends at (10 min, 45 mm). Find both rates and the percentage increase caused by the fan.

One way to explain it

Still air: 25 / 10 = 2.5 mm/min. Fan: 45 / 10 = 4.5 mm/min. Percentage increase = (4.5 - 2.5) / 2.5 x 100 = 80%.

Why this answer works
  • The gradient of each line is the rate of water uptake.
  • Use the whole length of the line, so the triangle is large.
  • Percentage change uses the still-air rate as the starting value.

Watch out for this

A student says: "The rate is the y value divided by the x value at any point on the graph." What is wrong with this?

Show the answer

That only works for a straight line through the origin. For any other line, divide the change in y by the change in x. For a curve, use a tangent.

In the real world

A day of humidity in Singapore

In Singapore, relative humidity is above 90% just before sunrise and falls to around 60% on a dry afternoon. A graph of humidity against time shows when transpiration is likely to be fastest.

Source: Meteorological Service Singapore, Climate of Singapore

Check your understanding

A straight best-fit line passes through (2 min, 10 mm) and (8 min, 34 mm). What is the rate of bubble movement?

  1. 0.25 mm/min
  2. 4.0 mm/min
  3. 4.25 mm/min
  4. 5.0 mm/min
Show the answer

4.0 mm/min

(34 - 10) / (8 - 2) = 24 / 6 = 4.0 mm/min. The rate is the change in distance divided by the change in time.

Quick recall

Card 1 of 3. Answer in your head, then check.

How do you turn a line on a graph into a rate?

You can return to this lesson any time.