Skip to notes
9476 / 2027
Data and Experimental Skills

Lesson 1 of 11

Read unfamiliar data

Select evidence and connect it to a chemical principle.

A-Level 9476 (2026-2027)

  • I can analyse, conclude and evaluate.Syllabus

    Syllabus 9476, ACE. Analyse, conclude and evaluate

Read unfamiliar data with a purpose

Separate the question, the evidence and the chemistry that connects them.

Make a guess. You are not marked.

A data question defines a new quantity that is not in your syllabus, then gives data about it. What should you do?

  1. Skip that part, since it is outside the syllabus
  2. Use the definition given and apply it to the data
  3. Replace it with the closest term you have learnt
Show the answer

Use the definition given and apply it to the data

The question gives you what you need. Data questions often bring in a new idea so that you can apply it with chemistry you know.

Start with the quantity or claim the question asks you to establish. Then locate the relevant measurements, conditions and any new definitions in the stem. An unfamiliar substance name does not make its data unusable. Use the supplied information together with a familiar idea, such as conservation of atoms, collision frequency or intermolecular attraction.

Use the values the question gives, even when you remember different ones. A question may give more precise values, or values for a different sample.

From information to an answer
  1. Name the task

    For a calculation, identify the required quantity and unit. For an explanation, identify the observation that needs explaining.

  2. Select the evidence

    Extract the relevant rows, axes and conditions. Distinguish a measurement from a proposed explanation; do not use every number just because it is present.

  3. Connect a principle

    State the chemical relationship that makes the evidence relevant. Check that the comparison holds other important variables constant.

  4. State the result and its limit

    Give a numerical answer with units, or a conclusion supported by a specific comparison. State an assumption where the inference depends on it.

Worked exampleAssess a claim about a catalyst

Two runs use the same amount of reactant and the same temperature. Run A gives 40 cm3 of gas in 20 s; run B gives 40 cm3 in 50 s. Both eventually give 60 cm3. A report says: "A produces more product because it is faster."

Try it first. Then show the worked stepsHide the worked steps
  1. The time to reach the same volume is smaller for A. Its average rate to 40 cm3 is 2.0 cm3 s-1, compared with 0.80 cm3 s-1 for B.
  2. The final volumes are the same under the same collection conditions, so these data do not show more final gaseous product in A.
  3. The evidence supports faster production, not a greater final amount. Identifying the cause as a catalyst also requires the stated experimental difference between the runs.
Answer

Compare rate using a time interval and final amount using the plateau. They answer different questions.

A useful explanation joins evidence and mechanism. For example: "At the same temperature and reactant concentration, this catalyst gives a higher measured rate. It provides an alternative pathway with a lower activation energy." Merely repeating "the graph is higher" does not explain the chemistry.

Data can also predict. Dmitri Mendeleev used the patterns in his periodic table to predict an undiscovered element, eka-silicon. He predicted a relative atomic mass of about 72 and a density of 5.5 g/cm3. Germanium, isolated in 1886, has values of 72.6 and 5.32 g/cm3.

Check your understanding

A table gives temperature, concentration, reaction time and the colour of the laboratory bench. Which data belong in an explanation of the rate trend?

  1. Temperature, concentration and reaction time, after checking which one was changed
  2. Every column, since the examiner put each one there to be used in the answer
  3. Reaction time alone, since rate is calculated from time and nothing else
Show the answer

Temperature, concentration and reaction time, after checking which one was changed

Use the variables that can affect rate, and find out which one was varied. Bench colour has no chemical role, so do not invent a link just because a detail is given.

Watch out for this

A student says: "When a question gives the isotopic masses of chlorine as 34.97 and 36.97, it is fine to use 35 and 37 instead." What is wrong with this?

Show the answer

Use the values in the question: they are more precise, and the calculation is meant to use them. A June 2023 Cambridge report names the major error in one calculation. Candidates used 63 and 65 as the copper isotope masses instead of the data given.