Lesson 12 of 13
The single-slit pattern
I can recall and use b sin theta = lambda for the positions of the first minima of a single slit of width b.Syllabus
Syllabus 9478, 11(l). Recall and use b sin theta = lambda for the positions of the first minima of a single slit of width b.
Make a guess. You are not marked.
Light passes through a single narrow slit onto a screen. The slit is made narrower. What happens to the central bright band?
Show the answer
It becomes wider, because diffraction increases as the slit narrows.
The first minimum is at sin theta = lambda / b. A smaller slit width b gives a larger angle, so the central band spreads out, though it becomes dimmer.
Light through one narrow slit makes a wide, bright central band. Its edges are the first minima, where b sin θ = λ.
Shine a laser through a single slit of width b. On a screen you see a bright central band, with weaker, narrower bands on each side.
The first minima
The first dark minimum on each side of the centre is at angle θ, where:
This equation gives a minimum, not a maximum. The two first minima are the edges of the central band, so its full width is twice the distance from the centre to one minimum.
Worked example
The width of the central band
A slit of width b = 0.15 mm is lit by light of wavelength 600 nm. The screen is D = 2.0 m away.
Centre to first minimum: y = D tan θ ≈ 2.0 × 0.0040 = 0.0080 m = 8.0 mm
Full width = 2 × 8.0 = 16 mm
The angle is small, so tan θ is almost the same as sin θ.
The first minima mark the edges of the central band
For b = 0.15 mm, λ = 600 nm and D = 2.0 m. The graph shows brightness as a fraction of the centre's, not displacement.
The 8.0 mm is from the centre to one minimum. The whole central band is 16 mm wide.
Check your understanding
A single slit of width 0.15 mm is illuminated by 600 nm light. A screen is 2.0 m away. The first minimum is about 8.0 mm from the centre on each side. What is the central maximum's full width?
Show the answer
16 mm.
The central maximum extends from the first minimum at -8.0 mm to the first minimum at +8.0 mm: a total width of 16 mm.
Changing the slit or the light
From sin θ = λ/b, a narrower slit gives a larger angle. Halving b roughly doubles the width of the central band. Less light gets through, so the band is also dimmer. A shorter wavelength makes the band narrower.
b sin θ = λ looks like the grating equation, but it gives a dark minimum, not a bright one. And b is the width of one slit, not the distance between two slits.