9478 / 2027
Superposition overview

Lesson 5 of 13

Measuring the wavelength of sound

  • I can show an understanding of experiments which demonstrate standing waves using microwaves, stretched strings and air columns.Syllabus

    Syllabus 9478, 11(b). Show an understanding of experiments which demonstrate standing waves using microwaves, stretched strings and air columns.

  • I can determine the wavelength of sound using standing waves.Syllabus

    Syllabus 9478, 11(d). Determine the wavelength of sound using standing waves.

Make a guess. You are not marked.

A tuning fork gives its first resonance when the air column in a tube is 0.16 m long. The water level is then lowered slowly. At about what air length is the next resonance?

  1. About 0.64 m, one whole wavelength.
  2. About 0.5 m, three times as long.
  3. About 0.32 m, twice as long.
Show the answer

About 0.5 m, three times as long.

The first resonance holds a quarter of a wavelength and the next holds three quarters. So the next length is about three times the first; the end correction makes it a little more, about 0.51 m.

A resonance tube measures the wavelength of sound. The air lengths of two resonances in a row differ by half a wavelength.

The resonance tube

Hold a vibrating tuning fork over the open top of a tube that stands in water. Change the water level to change the length of the air column. At certain lengths the sound gets much louder. This is resonance: a standing wave builds up because the fork's frequency matches a natural frequency of the air column.

The water surface is the closed end. Measure each air length from the water surface to the top of the tube.

A resonance tube

Measure each air length from the water surface to the top of the tube.

The top of the tube stays fixed; the water level moves

A 480 Hz tuning fork over a tube, with air lengths of 0.160 m and 0.510 mA tuning fork is held over the open top of a tube that stands in water. The water surface closes the air column. Two water levels give air lengths of 0.160 m and 0.510 m, measured from the top of the tube.480 Hz fork0.160 m0.510 mFixedmouthFirst levelSecond levelWaterTwo settings, not two water surfaces
The top of the tube stays fixed. With a 480 Hz fork, the note is loudest when the air column is 0.160 m and then 0.510 m long.

Worked example

Two resonances remove the end correction

A 480 Hz fork gives resonances at air lengths L1 = 0.160 m and L2 = 0.510 m. The end correction e is the same both times.

(L2 + e) - (L1 + e) = λ/2
λ = 2(0.510 - 0.160) = 0.700 m
v = fλ = 480 × 0.700 = 336 m/s

The end correction cancels when you subtract. You can then find it: λ/4 = 0.175 m, so e = 0.175 - 0.160 = 0.015 m.

Check your understanding

A 480 Hz fork gives successive resonances at physical air lengths 0.160 m and 0.510 m in the same closed/open tube. Assume a common end correction. What are the wavelength and wave speed?

  1. Wavelength 0.700 m; speed 336 m/s.
  2. Wavelength 0.640 m; speed about 307 m/s.
  3. Wavelength 0.350 m; speed 168 m/s.
Show the answer

Wavelength 0.700 m; speed 336 m/s.

The length difference is 0.350 m = lambda/2, so lambda = 0.700 m. The wave speed is 480 x 0.700 = 336 m/s.

Compare with real data. The worked numbers are exam-style and give 336 m/s. The speed of sound in air at 20 °C is about 343 m/s. It rises with temperature, to about 349 m/s at 30 °C, so note the room temperature with your result.

Getting a good reading

The loudest point is broad. Find it coming from a longer length and from a shorter one, then take the average. Read the scale with your eye level with the water surface. Check that the two resonances are next to each other: skipping one adds another half wavelength.

Do not use λ = 4L1 on its own. It leaves out the end correction and gives a wavelength that is too small, here 0.640 m.