9478 / 2027
Superposition overview

Lesson 7 of 13

Two-source interference experiments

  • I can show an understanding of two-source interference using water waves, sound waves, light and microwaves.Syllabus

    Syllabus 9478, 11(f). Show an understanding of two-source interference using water waves, sound waves, light and microwaves.

  • I can show an understanding of the conditions required for two-source interference fringes to be observed.Syllabus

    Syllabus 9478, 11(g). Show an understanding of the conditions required for two-source interference fringes to be observed.

Make a guess. You are not marked.

In a double-slit experiment, the laser is replaced by two identical red lamps, one behind each slit. What appears on the screen?

  1. Fringes twice as bright, because there are now two lamps.
  2. The same fringes, because both lamps give the same colour and brightness.
  3. Even light with no steady fringes, because the lamps are not coherent.
Show the answer

Even light with no steady fringes, because the lamps are not coherent.

Light from two separate lamps has a phase difference that changes at random, far too fast to see. Any fringes keep moving, so the screen looks evenly lit.

Interference from two sources can be shown with water waves, sound, microwaves and light. Each needs two coherent sources whose waves overlap.

Four demonstrations

  • Water. In a ripple tank, two dippers on one vibrating bar send out ripples. Where they overlap, lines of still water lie between lines of strong ripples.
  • Sound. Two loudspeakers are run by one signal generator. As you walk across in front of them, the sound gets loud and quiet in turn. Echoes from walls can fill in the quiet spots.
  • Microwaves. One transmitter faces a metal sheet with two slits. A probe moved across the far side finds maxima and minima.
  • Light. One laser shines on two narrow slits. Bright and dark fringes appear on a screen, as in the double-slit experiment.

One driver feeds both sources

Water: two dippers on one drive

One drive keeps two ripple sources in stepSeen from above, two dippers on one drive send out circular ripples. Solid lines are crests and dashed lines are troughs, at one instant. The two sets of ripples overlap in the tank.Common driveS1S2Solid: crests. Dashed: troughs.

This is a snapshot of crests and troughs. Watch it over time to see the fixed lines of still water and of strong ripples.

Microwaves: one transmitter, two slits

Waves from two slits overlap at a movable probeOne transmitter sends microwaves to two slits in a metal sheet. Waves from the two slits overlap at a probe, which moves across the pattern without being turned.OnesourceS1S2Move probeTwo aperturesKeep probe parallel to the same E.

Keep the frequency and the direction of the probe fixed. Turning the probe changes its reading for a different reason.

Water: one bar drives both dippers, so they stay in step. Microwaves: one transmitter feeds both slits.

Conditions for seeing fringes

  • The sources must be coherent. In practice, one source is split into two, such as one laser and two slits.
  • The waves must overlap. Each slit must be narrow enough to diffract the waves.
  • For light and other transverse waves, the two waves should be polarised in the same plane.
  • The amplitudes should be similar, so the dark fringes are really dark.
  • The fringes must be far enough apart to see: a small slit separation and a large screen distance help.

Two separate lamps are not coherent. The phase difference between them changes at random, far too fast to see. So the fringes never stay still, and the screen looks evenly lit.

Check your understanding

Two dippers on one bar make a steady interference pattern in a ripple tank. Each dipper is then given its own motor, set to the same frequency, and the pattern drifts. Why does it drift?

  1. The phase difference between the two dippers no longer stays constant.
  2. The ripples from the two dippers now travel across the tank at different speeds.
  3. The two sets of ripples no longer have equal amplitudes.
Show the answer

The phase difference between the two dippers no longer stays constant.

Two separate motors never stay exactly in step. As the phase difference wanders, the lines of still water move, so the sources are no longer coherent.

A real example. Thomas Young used water waves to explain interference. His published lectures included a sketch of the pattern made by two sources of water waves.

Coherent does not mean in phase. Sources with a fixed phase difference, even antiphase, are coherent and give a steady pattern.