Lesson 9 of 17
Decay constant from a log graph
I can infer and sketch exponential decay and use x = x0 exp(-lambda t) for an appropriate population, activity or received source rate.Syllabus
Syllabus 9478, 20(i). Infer and sketch exponential decay and use x = x0 exp(-lambda t) for an appropriate population, activity or received source rate.
I can use lambda = ln(2)/half-life.Syllabus
Syllabus 9478, 20(k). Use lambda = ln(2)/half-life.
Make a guess. You are not marked.
You plot ln(A) against time t for one radioactive nuclide, where A is its activity. What shape do you expect?
Show the answer
A straight line sloping down.
A = A0 e^(-lambda t), so ln A = ln A0 - lambda t. That is a straight line with gradient -lambda.
Taking logs turns exponential decay into a straight line: ln r = ln r0 - λt. So the gradient of ln r against t is -λ, and then t1/2 = ln 2/λ.
Use the corrected count rate r, with the detector fixed. The equation has the form y = mx + c:
Gradient = -λ
Intercept = ln r0
A straight line shows the decay is exponential. A curved line can mean that background was not subtracted, or that two nuclides are decaying together.
A logarithm turns the supplied fractional model into a straight line
This is ln(r/r0) = -ln(2)t/120, with t in seconds. The gradient is -0.00578 per second, which is -λ. Zero on this axis means r = r0, not r = 0.
Take logs only of positive values. Near background, a corrected rate can come out zero or negative by chance. Keep that reading in your table, but leave it out of the fit.
Paper 4 practice: spreadsheet
Fit the decay records
Open the counts and decay workbook, or import the raw count CSV. These are made-up teaching records, not a real experiment. The workbook already holds the formulas and charts, so use it to check your own.
Sheet Rates keeps the raw records in rows 11 to 25: record ID, series, start time, duration, count and status. S01 to S05 are source plus background, B01 to B03 are background, and D01 to D07 are a decaying source. Keep these columns as they are; a blank is not a zero.
- Pool a steady series by total counts over total time. The background records give 720 counts in 180 s: B4
=SUM(E16:E18)/SUM(D16:D18)= 4.0 counts/s. - For each record, find the middle of its time window, G11
=C11+D11/2, and its rate, H11=E11/D11. Subtract the background in I11=IF(B11="background","",H11-$B$4), and copy down. - On sheet Decay, B4 holds r0 = 80 counts/s. Find the ratio D11
=C11/$B$4, and log only positive rates: E11=IF(C11>0,LN(D11),""). - Fit D01 to D05: E4
=-SLOPE(E11:E15,B11:B15)gives λ, and E6=LN(2)/E4gives the half-life.
| Record | Midpoint / s | Corrected / counts s-1 |
|---|---|---|
| D01 | 2 | 79 |
| D02 | 120 | 40 |
| D03 | 240 | 20 |
| D04 | 360 | 10 |
| D05 | 480 | 5 |
| D06 | 960 | -0.1 |
| D07 | 1200 | 0 |
The fit gives λ = 0.005774516 s-1 and a half-life of 120.0355 s, close to the 120 s used to make the data. It is not exact, because each count covers a time window and is rounded to a whole number. D06 and D07 stay in the table but are not logged.
The Motion data method explains importing numbers, copying formulas and XY charts. The measurement-record method explains how to keep real readings and justify any you leave out.
A real example. NASA's Perseverance rover runs on heat from 4.8 kg of plutonium dioxide. NASA gives its electrical output as "about 110 watts at launch, declining a few percent per year". IAEA data give plutonium-238 a half-life of 87.7 years, so decay alone has λ = 0.693/87.7 = 0.0079 per year: a fall of only 0.79% a year. A log graph of the output is steeper than that, because the generator itself also wears.
The gradient is -λ, not the half-life. Find λ from the gradient, then t1/2 = ln 2/λ, in the time unit of the graph's axis.
Check your understanding
A graph of ln(count rate) against time t in hours is a straight line with gradient -0.0866 per hour. What is the half-life?
Show the answer
8.00 hours.
The gradient is -lambda, so lambda = 0.0866 per hour. Then t1/2 = ln 2/lambda = 0.693/0.0866 = 8.00 hours.