8867 / 2027
Nuclear Physics overview

Lesson 6 of 15

Background radiation

  • I can explain the origins and significance of background radiation.Syllabus

    Syllabus 8867, 11(g). Explain the origins and significance of background radiation.

Make a guess. You are not marked.

A Geiger counter is switched on in a room with no radioactive source in it. What does it record?

  1. Nothing, because there is no source in the room.
  2. A steady count that slowly falls to zero.
  3. A small, random count from background radiation.
Show the answer

A small, random count from background radiation.

Radiation from rocks, building materials, the air, food and space reaches the detector everywhere. So the count is never zero.

Background radiation is the low level of radiation that is always around us. Measure it with the source taken away, then subtract its rate from every reading.

Background comes from:

  • Space: cosmic rays.
  • The ground and buildings: radon gas, and radioactive substances in rock, soil, bricks and concrete.
  • Food and our own bodies: small amounts of natural radioactive substances.
  • Human activity: mainly medical uses.

Background matters most when the source is weak, or has nearly decayed. Then background is a large part of each reading, and leaving it in gives a wrong answer.

Keep the detector conditions fixed for the background comparison

Keep the detector conditions fixed for the background comparisonTwo schematic arrangements use the same detector, counter connection and source position.Source presentDetectord unchangedCounterSourceInvestigated source absentDetectorBackgroundd unchangedCounterRemoved

Count with the source, then without it, with the detector in the same place. Turn each count into a rate before you subtract.

Count with the source in place. Then remove the source and count again, with the detector in the same place.

Worked background correction

Subtract rates, not raw counts

With the source in place, a detector records 1200 counts in 30.0 s. With the source removed, it records 240 counts in 60.0 s.

Total rate = 1200/30.0 = 40.0 counts/s
Background rate = 240/60.0 = 4.0 counts/s
Corrected rate = 40.0 - 4.0 = 36.0 counts/s

Subtracting the raw counts, 1200 - 240 = 960, means nothing here, because the counting times differ.

Background is a low rate, so its counts scatter a lot. Measure it for a long time to get a reliable average.

A real example. Singapore's NEA runs 40 air and water radiation monitoring stations. It notes that background levels vary with the amount of naturally occurring radioactive material in soil, rock, buildings, water and air. NEA names radon, a natural gas in rocks, soil, bricks and concrete, as one source, and medical uses as the largest man-made one.

Take background away before you halve or compare readings. A raw reading never falls to zero, because background is always there.

Check your understanding

Constructed source-plus-background records total 2000 counts in 50.0 s. Comparable background records total 200 counts in 50.0 s. What is the net source count rate?

  1. 1800 counts/s.
  2. 40.0 counts/s.
  3. 36.0 counts/s.
Show the answer

36.0 counts/s.

The total rate is 2000/50.0 = 40.0 counts/s and background rate is 200/50.0 = 4.0 counts/s. Their difference is 36.0 counts/s.