Lesson 8 of 10
Loudness and pitch
I can relate loudness to amplitude and pitch to frequency.Syllabus
Syllabus K323, 10(h). Relate loudness to amplitude and pitch to frequency.
Make a guess. You are not marked.
A microphone shows two notes on the same screen with the same settings. The traces are equally tall. In the same time, note X shows 2 complete waves and note Y shows 4. How does Y sound compared with X?
Show the answer
Higher in pitch and about as loud.
Y fits more cycles into the same time, so its frequency is higher and its pitch is higher. The equal heights show equal amplitudes.
A sound wave with a larger amplitude is louder. A sound wave with a higher frequency has a higher pitch.
Amplitude is the size of an oscillation. Frequency is how many oscillations happen each second.
Change amplitude and frequency separately
Loudness is how strong a sound seems to a listener. Pitch is how high or low a note sounds. Heard under the same conditions, a sound of greater amplitude is louder. A sound of greater frequency has a higher pitch.
You can change one without the other. On a piano, the lowest key plays a note of about 27.5 Hz and the highest about 4190 Hz. Strike any key harder and the note gets louder, but its pitch stays the same.
The graphs below show the displacement of an air particle against time for three sounds, measured at the same place. The vertical unit is the micrometre (µm), where 1 µm = 0.000001 m.
Compare amplitude and period separately
These are air-particle displacement-time graphs at one observation point, with the same axis scales and comparable conditions. They are not paths through the air or microphone voltages.
A: reference sound
Amplitude 0.20 micrometres; period 4.0 ms; frequency 250 Hz.
B: larger amplitude
Amplitude 0.40 micrometres; period 4.0 ms; frequency 250 Hz.
C: shorter period
Amplitude 0.20 micrometres; period 2.0 ms; frequency 500 Hz.
B is louder than A under the comparable conditions and has the same pitch. C has a higher pitch than A; its unchanged displacement amplitude alone does not establish equal perceived loudness.
- Sound A: 0.20 µm amplitude, 4.0 ms period
- 4.0 ms = 0.0040 s, so f = 1/0.0040 = 250 Hz.
- Sound B: 0.40 µm amplitude, 4.0 ms period
- Its frequency is also 250 Hz, so it has the same pitch as A. Its larger amplitude makes it louder. Twice the amplitude does not mean it sounds exactly twice as loud.
- Sound C: 0.20 µm amplitude, 2.0 ms period
- 2.0 ms = 0.0020 s, so f = 500 Hz. Its higher frequency gives a higher pitch than A. C and A have the same amplitude, but that does not mean they sound exactly as loud.
Read a microphone trace with its own units
A microphone joined to a screen can show a sound as a trace against time. The trace usually shows the voltage from the microphone, not the displacement of the air. Read the label on the vertical axis.
To compare two sounds fairly, keep the microphone, its settings and its distance from the source the same. Turning up the gain makes the trace taller, but the source is no louder. The time between two neighbouring peaks still gives the period.
Taller is louder. Closer together is higher. The height of the trace shows amplitude. The number of cycles in a given time shows frequency. A louder sound is not a higher sound.
Check your understanding
At the same observation point in comparable conditions, sound B has twice the particle-displacement amplitude of sound A, but both have period 4.0 ms. How do they compare?
Show the answer
B is louder, while both have the same pitch.
The equal periods give equal frequencies and therefore the same pitch. Under the stated comparable conditions, greater amplitude means greater loudness. This does not say that perceived loudness is exactly doubled.