K326 / K327 / 2027
General properties of waves overview

Lesson 8 of 9

Loudness and pitch

  • I can relate loudness to amplitude and pitch to frequency.Syllabus

    Syllabus K326 / K327, 9(h). Relate loudness to amplitude and pitch to frequency.

Make a guess. You are not marked.

A microphone shows two notes on the same screen with the same settings. The traces are equally tall. In the same time, note X shows 2 complete waves and note Y shows 4. How does Y sound compared with X?

  1. Higher in pitch and about as loud.
  2. Louder and the same pitch.
  3. Lower in pitch, because its waves are narrower.
Show the answer

Higher in pitch and about as loud.

Y fits more cycles into the same time, so its frequency is higher and its pitch is higher. The equal heights show equal amplitudes.

A sound wave with a larger amplitude is louder. A sound wave with a higher frequency has a higher pitch.

Amplitude is the size of an oscillation. Frequency is how many oscillations happen each second.

Change amplitude and frequency separately

Loudness is how strong a sound seems to a listener. Pitch is how high or low a note sounds. Heard under the same conditions, a sound of greater amplitude is louder. A sound of greater frequency has a higher pitch.

You can change one without the other. On a piano, the lowest key plays a note of about 27.5 Hz and the highest about 4190 Hz. Strike any key harder and the note gets louder, but its pitch stays the same.

The graphs below show the displacement of an air particle against time for three sounds, measured at the same place. The vertical unit is the micrometre (µm), where 1 µm = 0.000001 m.

Compare amplitude and period separately

These are air-particle displacement-time graphs at one observation point, with the same axis scales and comparable conditions. They are not paths through the air or microphone voltages.

A: reference sound

Sound A: amplitude 0.20 micrometres and period 4.0 millisecondsThe vertical axis is particle displacement in micrometres, with the same scale from minus 0.40 to plus 0.40 for all three graphs. The horizontal axis runs from zero to eight milliseconds on the same scale. This sound has amplitude 0.20 micrometres, period 4.0 milliseconds and frequency 250 hertz. It completes two cycles in eight milliseconds.Particle displacement / micrometres-0.4-0.20.0+0.2+0.402468Time / ms

Amplitude 0.20 micrometres; period 4.0 ms; frequency 250 Hz.

B: larger amplitude

Sound B: amplitude 0.40 micrometres and period 4.0 millisecondsThe vertical axis is particle displacement in micrometres, with the same scale from minus 0.40 to plus 0.40 for all three graphs. The horizontal axis runs from zero to eight milliseconds on the same scale. This sound has amplitude 0.40 micrometres, period 4.0 milliseconds and frequency 250 hertz. It has twice the displacement amplitude of A and the same frequency.Particle displacement / micrometres-0.4-0.20.0+0.2+0.402468Time / ms

Amplitude 0.40 micrometres; period 4.0 ms; frequency 250 Hz.

C: shorter period

Sound C: amplitude 0.20 micrometres and period 2.0 millisecondsThe vertical axis is particle displacement in micrometres, with the same scale from minus 0.40 to plus 0.40 for all three graphs. The horizontal axis runs from zero to eight milliseconds on the same scale. This sound has amplitude 0.20 micrometres, period 2.0 milliseconds and frequency 500 hertz. It completes four cycles in eight milliseconds, twice as many as A, so its frequency is double. Equal displacement amplitude at a different frequency does not establish equal perceived loudness.Particle displacement / micrometres-0.4-0.20.0+0.2+0.402468Time / ms

Amplitude 0.20 micrometres; period 2.0 ms; frequency 500 Hz.

B is louder than A under the comparable conditions and has the same pitch. C has a higher pitch than A; its unchanged displacement amplitude alone does not establish equal perceived loudness.

A and B have the same period but different amplitudes. C has a shorter period than A. These traces show how far a particle is from its rest position. They are not paths that air particles travel along.
Sound A: 0.20 µm amplitude, 4.0 ms period
4.0 ms = 0.0040 s, so f = 1/0.0040 = 250 Hz.
Sound B: 0.40 µm amplitude, 4.0 ms period
Its frequency is also 250 Hz, so it has the same pitch as A. Its larger amplitude makes it louder. Twice the amplitude does not mean it sounds exactly twice as loud.
Sound C: 0.20 µm amplitude, 2.0 ms period
2.0 ms = 0.0020 s, so f = 500 Hz. Its higher frequency gives a higher pitch than A. C and A have the same amplitude, but that does not mean they sound exactly as loud.

Read a microphone trace with its own units

A microphone joined to a screen can show a sound as a trace against time. The trace usually shows the voltage from the microphone, not the displacement of the air. Read the label on the vertical axis.

To compare two sounds fairly, keep the microphone, its settings and its distance from the source the same. Turning up the gain makes the trace taller, but the source is no louder. The time between two neighbouring peaks still gives the period.

Taller is louder. Closer together is higher. The height of the trace shows amplitude. The number of cycles in a given time shows frequency. A louder sound is not a higher sound.

Check your understanding

At the same observation point in comparable conditions, sound B has twice the particle-displacement amplitude of sound A, but both have period 4.0 ms. How do they compare?

  1. B travels twice as fast because its amplitude is twice as large.
  2. B has a higher pitch because its amplitude is larger.
  3. B is louder, while both have the same pitch.
Show the answer

B is louder, while both have the same pitch.

The equal periods give equal frequencies and therefore the same pitch. Under the stated comparable conditions, greater amplitude means greater loudness. This does not say that perceived loudness is exactly doubled.