Lesson 6 of 10
When a branch is opened
I can combine current, potential difference and resistance relationships to solve a whole circuit.Syllabus
Syllabus K323, 15(g). Combine current, potential difference and resistance relationships to solve a whole circuit.
Make a guess. You are not marked.
Two identical lamps are in parallel, directly across a cell whose p.d. stays fixed. The filament of one lamp breaks. What happens to the other lamp?
Show the answer
It stays just as bright, because its p.d. has not changed.
Each lamp is directly across the cell, so each has the full cell p.d. Breaking one branch does not change the other branch's p.d. or current.
When a branch is opened, first work out the new total resistance and supply current. Then find what happens to the p.d. across each part.
A parallel group has less resistance than any one of its branches. In a complete circuit, you work back from the supply current.
Branches straight across the supply
Suppose the branches are joined straight across a supply whose p.d. stays fixed. Opening one branch leaves the same p.d. across the others, so their currents do not change. The supply current falls, because the open branch no longer carries any current.
Mains wiring in a home works this way. In Singapore, the mains supply is 230 V. The lamps and sockets are joined in parallel across it, so switching one off does not change the others. Practical electricity shows how they are switched safely.
A branch current can rise while the total current falls
Now go back to the complete circuit: 4.0 Ω in series with 6.0 Ω and 12.0 Ω in parallel, across 12.0 V. There, the supply current was 1.50 A and the 6.0 Ω branch carried 1.0 A.
Open one branch and work it out again
The 12.0 V cell and R1 = 4.0 ohm are unchanged. Only the 12.0 ohm branch between B and C is opened.
Open only the 12 ohm branch
The total current falls, but the current in the 6.0 ohm branch rises. R1 now takes a smaller p.d., which leaves more for the branch.
Open only the 12.0 Ω branch. The path left is 4.0 Ω in series with 6.0 Ω, so the total resistance is 10.0 Ω. The supply current is 12.0/10.0 = 1.20 A, and all of it passes through the 6.0 Ω resistor.
So the 6.0 Ω branch current rises from 1.0 A to 1.20 A, even though the supply current falls from 1.50 A to 1.20 A. R1 now takes a smaller p.d., 1.20 x 4.0 = 4.8 V. That leaves 7.2 V across the 6.0 Ω resistor, more than the 6.0 V before.
Work it out again; do not guess. The other branches stay the same only when they are straight across a fixed supply. With a resistor in series, the p.d. across the branches changes.
Check your understanding
An ideal 12.0 V source supplies a 4.0 ohm resistor in series with parallel 6.0 ohm and 12.0 ohm branches. Initially the source current is 1.50 A and the 6.0 ohm branch current is 1.0 A. Only the 12.0 ohm branch is then opened. What happens?
Show the answer
Source current falls to 1.20 A, while the 6.0 ohm branch current rises to 1.20 A.
The remaining path has 4.0 + 6.0 = 10.0 ohm, so its current is 12.0/10.0 = 1.20 A everywhere. The 4.0 ohm drop falls to 4.8 V, leaving 7.2 V across the 6.0 ohm resistor. Total current falls even though this branch current rises.