Lesson 5 of 8
Why switches and fuses go in the live wire
I can explain why switches, fuses and circuit breakers interrupt the live wire.Syllabus
Syllabus K323, 16(i). Explain why switches, fuses and circuit breakers interrupt the live wire.
Make a guess. You are not marked.
A heater is wired with its switch in the neutral wire instead of the live wire. The switch is turned off and the heater stops. Is it safe to touch the heating element?
Show the answer
No. The element is still connected to live.
Switching the neutral only breaks the return path. The element stays joined to the live wire, so a person touching it can complete a path to earth and get a shock.
A switch, fuse or circuit breaker must be in the live wire. Then, when it opens, it cuts the appliance off from the high voltage.
Live is at a high voltage and neutral is close to 0 V. A switch breaks a circuit by opening a gap in one wire.
Off does not always mean safe
Both circuits have the same a.c. supply and load. Amber shading marks every part still joined to live. It is not a current arrow.
Switch in the live wire
The gap cuts the load off from live. The load is joined only to neutral, which is close to 0 V.
Switch in the neutral wire
No current flows, but the load and the blue wire up to the gap are still joined to live. Turning the appliance off has not made it safe.
A switch in the live wire
When this switch opens, the path from the live supply to the appliance is cut. The appliance is now joined only to neutral, which is close to 0 V. No part of it is at the high voltage.
A switch in the neutral wire
Opening a switch in neutral still stops the current, so the appliance turns off. But the appliance is still joined to live. With no current, there is no p.d. across the element, so all of it is at the live voltage.
Someone who touches it could become a path to earth and get a shock. The danger is easy to miss, because the appliance looks switched off.
Fuses and circuit breakers too
A fuse or circuit breaker cuts the current when there is a fault. It must be in live for the same reason. If a fuse in neutral melted, the appliance would stop working, but it would still be joined to live.
A BS 1363 plug fits a socket only one way round. So its fuse is always on the live side.
Switches around a home
In a home, the lamps and sockets are joined in parallel across live and neutral. Each one gets the full 230 V and can be switched on and off by itself. Singapore homes have separate lighting circuits and socket circuits.
Off does not always mean safe. A switch in the neutral wire stops the current but leaves the appliance at the live voltage.
Check your understanding
In a simple mains appliance circuit, a single-pole switch opens only the neutral wire. The appliance stops operating. Which of these explanations is correct?
Show the answer
The normal current path is broken, but parts of the appliance can remain connected to live.
Opening neutral stops the normal load current, but it does not disconnect the live connection. A single-pole switch belongs in live so that opening it disconnects the appliance from live supply.