Skip to notes
K324 / 2027
Redox Chemistry

Lesson 5 of 7

What electrolysis does to the solution

Colour and pH changes, and the 2 : 1 gas ratio, come from the ions each electrode removes.

O-Level 6092 (2026) / SEC G3 K324 (2027)

Pure only
  • I can apply selective discharge.Syllabus

    Syllabus K324, 7.2(e). Apply selective discharge

  • I can construct electrode equations.Syllabus

    Syllabus K324, 7.2(g). Construct electrode equations

What electrolysis does to the solution

Each electrode removes ions, so the solution's colour and pH can change, and the same electrons fix how much of each product forms.

Electrolysis also changes the solution. Each electrode removes some ions, so the colour or pH of what is left can change. The same electrons pass through both electrodes, so they also fix how much of each product forms.

Label an aqueous electrolysis cell

Two graphite electrodes dip into blue aqueous copper(II) sulfate. Sulfate and hydroxide ions move to the anode, where oxygen bubbles form. Copper(II) and hydrogen ions move to the cathode, which becomes coated with pink-brown copper. The blue colour fades as copper(II) ions are removed.

Label the d.c. supply, the anode (+) and cathode (-), what each electrode is made of, the electrolyte and its state, and the product at each electrode. With inert electrodes, copper deposits at the cathode and oxygen bubbles off at the anode, so the blue colour fades and the solution becomes acidic.
What happens to the electrolyte (inert electrodes)
ElectrolyteColourpHReason
Copper(II) sulfate(aq)Blue fadesFalls: the solution becomes acidicCu2+ ions are removed as copper. OH- ions are removed as oxygen, so H+ and SO42- ions are left: sulfuric acid forms.
Concentrated sodium chloride(aq)Stays colourlessRises: the solution becomes alkalineHydrogen forms from water at the cathode and chlorine forms at the anode, so Na+ and OH- ions are left: sodium hydroxide forms.
Dilute sodium chloride(aq)Stays colourlessStays about 7 overallHydrogen and oxygen both come from water, so water is used up and the solution slowly becomes more concentrated.
Dilute sulfuric acidStays colourlessFalls slowlyHydrogen and oxygen both come from water. The same amount of acid is left in less water, so it becomes more concentrated.

Check your understanding

What happens to the blue colour during electrolysis of copper(II) sulfate solution with inert electrodes?

  1. It fades, because Cu2+ ions are removed at the cathode and nothing replaces them.
  2. It stays the same, because the anode releases Cu2+ as fast as the cathode removes it.
  3. It deepens, because water is used up and the copper(II) sulfate becomes more concentrated.
Show the answer

It fades, because Cu2+ ions are removed at the cathode and nothing replaces them.

Cu2+ is discharged as copper at the cathode. An inert anode makes oxygen instead of dissolving, so the Cu2+ that gives the blue colour is not replenished.

Check your understanding

A few drops of Universal Indicator are added to concentrated aqueous sodium chloride, which is then electrolysed with inert electrodes. What happens to the colour near the cathode?

  1. It turns red, because acid forms around the cathode
  2. It turns violet, because hydroxide ions are left there
  3. It is bleached, because chlorine forms near it
  4. It stays green, because sodium chloride is neutral
Show the answer

It turns violet, because hydroxide ions are left there

At the cathode, hydrogen forms from water: 2H2O + 2e- -> H2 + 2OH-. Hydroxide ions build up with the Na+ ions, so the solution there becomes alkaline.

Worked exampleHow the electrolyte changes

Aqueous copper(II) sulfate is electrolysed using carbon electrodes. Describe two changes in the electrolyte during the electrolysis, and explain each one.

Try it first. Then show the worked stepsHide the worked steps
  1. The blue colour of the solution fades.
  2. The Cu2+ ions that make the solution blue are discharged at the cathode as copper: Cu2+(aq) + 2e- → Cu(s). A carbon anode does not dissolve, so nothing replaces them.
  3. The pH falls, because the solution becomes acidic.
  4. OH- ions are discharged at the anode as oxygen, 4OH-(aq) → O2(g) + 2H2O(l) + 4e-. That leaves H+ and SO42- ions behind, so the solution turns into dilute sulfuric acid.
Answer

The blue colour fades, because Cu2+ ions are removed as copper at the cathode and the carbon anode does not replace them. The pH falls, because hydroxide ions are removed as oxygen at the anode, leaving H+ and sulfate ions, which make sulfuric acid.

Collect the two gases to compare their volumes

Two inverted tubes full of dilute sulfuric acid sit over the two electrodes. The tube over the cathode holds twice as much gas, hydrogen, as the tube over the anode, which holds oxygen.

When water is electrolysed, the volume of hydrogen at the cathode is twice the volume of oxygen at the anode.

Why 2 : 1? Count the electrons. The same electrons that leave the anode arrive at the cathode, so both electrodes handle the same number of moles of electrons. Write both half-equations with the same number of electrons. Cathode: 4H+(aq) + 4e- → 2H2(g). Anode: 4OH-(aq) → O2(g) + 2H2O(l) + 4e-. Four moles of electrons make 2 mol of hydrogen but only 1 mol of oxygen. Equal moles of gas take up equal volumes at the same temperature and pressure, so the hydrogen volume is twice the oxygen volume. In a real experiment the oxygen volume is a little less than half, because oxygen is slightly more soluble in water than hydrogen.

Splitting water with electricity is more than 200 years old. In 1800, Alessandro Volta invented the voltaic pile, an early battery. A few weeks later, the English scientists William Nicholson and Anthony Carlisle used it to electrolyse water.

Worked exampleLink the mass at one electrode to the gas at the other

Aqueous copper(II) sulfate is electrolysed with graphite electrodes. The cathode gains 0.640 g of copper. Calculate the volume of oxygen formed at the anode, at room temperature and pressure. (Ar: Cu = 64; one mole of gas occupies 24 dm3 at r.t.p.)

Try it first. Then show the worked stepsHide the worked steps
  1. Moles of copper deposited = 0.640 ÷ 64 = 0.0100 mol.
  2. Cathode: Cu2+ + 2e- → Cu, so moles of electrons = 2 × 0.0100 = 0.0200 mol.
  3. Anode: 4OH- → O2 + 2H2O + 4e-, so moles of oxygen = 0.0200 ÷ 4 = 0.00500 mol.
  4. Volume of oxygen = 0.00500 × 24 = 0.120 dm3.
Answer

0.120 dm3 (120 cm3) of oxygen. The electrons are the link: the same 0.0200 mol of electrons passes through both electrodes.

Watch out for this

A student says: "Dilute sulfuric acid is electrolysed. The same charge flows through both electrodes, so equal volumes of hydrogen and oxygen collect." What is wrong with this?

Show the answer

The same number of electrons does pass through both electrodes. But each oxygen molecule needs four electrons, and each hydrogen molecule only two. The half-equations show it: 4H+ + 4e- -> 2H2 and 4OH- -> O2 + 2H2O + 4e-. So the volume of hydrogen is twice the volume of oxygen. Examiners report candidates who did not know this ratio for dilute sodium chloride, which also gives hydrogen and oxygen.