Lesson 8 of 9
Heating through a change of state
I can define and use specific heat capacity and specific latent heat.Syllabus
Syllabus 9478, 13(g). Define and use specific heat capacity and specific latent heat.
When a substance warms, changes state and warms again, find the energy for each stage on its own, then add them up.
Use Q = mcΔT for each stage that changes the temperature, with the c of that state. Use Q = ml for the change of state.
Worked example
Ice at -5.0 °C to water at 25.0 °C
A 0.0800 kg block of ice is heated. Use cice = 2100 J/(kg K), lf = 3.34 × 105 J/kg and cwater = 4200 J/(kg K). Assume no energy is lost.
| Stage | Working | Energy / J |
|---|---|---|
| Warm the ice from -5 to 0 °C | 0.0800 × 2100 × 5.0 | 840 |
| Melt the ice at 0 °C | 0.0800 × 3.34 × 105 | 26 720 |
| Warm the water from 0 to 25 °C | 0.0800 × 4200 × 25.0 | 8400 |
Temperature against energy supplied
A 0.0800 kg block of ice at -5 °C is heated until it is water at 25 °C. The horizontal axis is energy supplied, not time.
A: 0 kJ, -5 °C. B: 0.840 kJ, 0 °C. C: 27.560 kJ, 0 °C. D: 35.960 kJ, 25 °C.
A to B warms the ice, B to C melts it and C to D warms the water. On the flat part energy is still going in.
When there is not enough energy
Suppose 0.0200 kg of ice is already at 0 °C and receives 5000 J. Melting all of it would need 0.0200 × 3.34 × 105 = 6680 J, which is more than 5000 J.
So 5.0 g of ice is left, sitting in water at 0 °C. None of the energy is left over to warm the water.
Try it step by step
Work it out in steps: Energy for the change of state, Q = mL, in J, then Time at the heater power, t = Q / P, in s.
Show the answer
Problem 1.
Energy for the change of state, Q = mL, in J: Q = 0.20 x 3.34 x 105 = 6.68 x 104 J
Time at the heater power, t = Q / P, in s: t = 6.68 x 104 / 100 = 668 s
Problem 2.
Energy for the change of state, Q = mL, in J: Q = 0.050 x 3.34 x 105 = 1.67 x 104 J
Time at the heater power, t = Q / P, in s: t = 1.67 x 104 / 50 = 334 s
Problem 3.
Energy for the change of state, Q = mL, in J: Q = 0.30 x 2.26 x 106 = 6.78 x 105 J
Time at the heater power, t = Q / P, in s: t = 6.78 x 105 / 2000 = 339 s
Check your understanding
A 20.0 g ice sample is already at its melting point. It receives 5000 J with negligible other transfers. Use l_f = 3.34 x 105 J/kg. What happens?
Show the answer
About 15.0 g melts and the temperature stays at the melting point.
Melted mass = 5000/(3.34 x 105) = 0.01497 kg. The energy is insufficient to melt all 20.0 g, so ice and water remain together at the melting temperature.
Before you warm the water, check that there is enough energy to melt all the ice.