9478 / 2027
Temperature and Ideal Gases overview

Lesson 4 of 8

Changing one quantity at a time

  • I can recall and use pV = NkT, where N is the number of particles.Syllabus

    Syllabus 9478, 12(c). Recall and use pV = NkT, where N is the number of particles.

Make a guess. You are not marked.

A fixed mass of ideal gas is compressed slowly to half its volume while its temperature is kept constant. What happens to its pressure?

  1. It halves, because pressure goes down when the gas is squeezed.
  2. It doubles, because the same particles hit a smaller wall area more often.
  3. It stays the same, because the temperature is unchanged.
Show the answer

It doubles, because the same particles hit a smaller wall area more often.

At constant temperature pV is constant for a fixed mass of ideal gas. Halving V doubles p: the same molecules at the same speeds hit the walls twice as often.

For a fixed amount of gas, pV/T stays the same. Hold one more quantity fixed and you get a simple rule.

If no gas gets in or out, N stays fixed, so pV/T = Nk is constant. Comparing two states:

p1V1/T1 = p2V2/T2
The three rules for a fixed amount of ideal gas
Also fixedRuleGraph
TemperaturepV constant: p ∝ 1/Vp against V is a curve
Volumep/T constant: p ∝ Tp against T is a line through 0 K
PressureV/T constant: V ∝ TV against T is a line through 0 K

Hold one more quantity fixed

Both graphs start from the same 0.500 mol sample at 300 K, 12.0 litres and 103.875 kPa. They show two different changes.

Fixed temperature, 300 K: p is proportional to 1/V

At fixed temperature, doubling the volume halves the pressurePressure in kPa against volume in litres at 300 K. A is 6.0 litres and 207.75 kPa, B is 12.0 litres and 103.875 kPa, and C is 24.0 litres and 51.9375 kPa, on a curve where pV is always 1246.5 J.06121824050100150200ABCAbsolute pressure / kPaVolume V / litre

A: 6.0 litres, 207.75 kPa. B: 12.0 litres, 103.875 kPa. C: 24.0 litres, 51.9375 kPa. Each product pV is 1246.5 J.

Fixed pressure, 103 875 Pa: V is proportional to T

At fixed pressure, heating from 300 K to 360 K takes the volume from 12.0 to 14.4 litresVolume in litres against temperature in kelvin, a straight line through the origin. A is 300 K and 12.0 litres; B is 360 K and 14.4 litres. Below 300 K the line is dashed, because it extends the model.0100200300360051015ABVolume / litreTemperature T / K

A: 300 K, 12.0 litres. B: 360 K, 14.4 litres. The dashed line extends the ideal model; a real gas would turn to liquid long before 0 K.

Two changes from the same 0.500 mol sample. Left: temperature fixed at 300 K. Right: pressure fixed at 103 875 Pa.

Worked example

Heating the 0.500 mol sample from 300 K to 360 K

At constant pressure, the volume grows in proportion to T. At constant volume, the pressure does.

Constant pressure: V2 = 12.0 × 360/300 = 14.4 litres
Constant volume: p2 = 103 875 × 360/300 = 124 650 Pa = 1.25 × 105 Pa

These are two different changes from the same start.

Check your understanding

A sealed rigid container of gas at 27 degrees C has a pressure of 1.00 x 105 Pa. It is heated to 87 degrees C. What is the new pressure?

  1. 3.22 x 105 Pa
  2. 1.20 x 105 Pa
  3. 0.833 x 105 Pa
Show the answer

1.20 x 105 Pa

At fixed volume, p is proportional to T in kelvin. T rises from 300 K to 360 K, so p = 1.00 x 105 x 360/300 = 1.20 x 105 Pa.

A real example. Robert Boyle published the rule pV = constant in 1662. He trapped air in the closed arm of a J-shaped tube by pouring mercury into the open arm. Adding more mercury squeezed the air harder and made its volume smaller.

p ∝ T only with T in kelvin. On a graph against °C, the line does not pass through the origin: it meets zero pressure at -273.15 °C.