9478 / 2027
Projectile Motion overview

Lesson 4 of 6

Projectile graphs and data

  • I can explain motion combining uniform velocity in one direction with uniform acceleration in a perpendicular direction.Syllabus

    Syllabus 9478, 5(b). Explain motion combining uniform velocity in one direction with uniform acceleration in a perpendicular direction.

Make a guess. You are not marked.

A ball is thrown up at an angle. Take up as positive and ignore air resistance. What does its vertical velocity-time graph look like?

  1. A straight line sloping down, crossing zero at the top of the path.
  2. A flat line, because nothing pushes the ball sideways.
  3. A V shape that touches zero at the top.
Show the answer

A straight line sloping down, crossing zero at the top of the path.

The vertical acceleration is -g all the time, so v_y falls at a steady rate. It is zero at the top and negative on the way down.

Velocity-time graphs and timed positions show both parts of projectile motion: vx stays the same, while vy changes at a steady rate, g.

Velocity-time graphs for each component

These graphs are for the launch from 20 m. The vx graph is a flat line at 12 m/s. The vy graph is a straight line with gradient -10 m/s2. It crosses zero at the top, 0.90 s.

Two velocity components share one elapsed time

The launch from 20 m with ux = 12 m/s and uy = 9.0 m/s. Up and right are positive.

Horizontal velocity stays at +12 m/s

Horizontal velocity stays at +12 m/sHorizontal velocity stays at 12 metres per second from launch to landing at about 3.09 seconds.0123.09305101215vx / m/sElapsed time t / s

Horizontal acceleration is zero, so vx stays the same.

Vertical velocity changes at -10 m/s each second

Vertical velocity changes at -10 m/s each secondVertical velocity starts at +9 metres per second, falls by 10 metres per second each second, crosses zero at 0.90 seconds and is about -21.9 metres per second at landing.0123.093-25-20-1009vy / m/sElapsed time t / svy = 0 at 0.90 s

The line crosses the zero-velocity time axis at the top. Its gradient remains -10 m/s2 there. At landing, vy = -21.931712... m/s.

Both lines stop at landing, t = (9 + √481)/10 = 3.093 s.

Both graphs share one time axis and end at landing, 3.093 s. Only vy changes.

The area under each graph is a displacement. Under the vx graph it is the range, 37.1 m. Under the vy graph, from launch to landing, it is -20 m: the ball ends 20 m lower than it started.

Positions at equal times

Worked out from the model, not measured
t / sx / my / mvy / m s-1
0.0020.00+9
0.5623.25+4
1.01224.00-1
1.51822.25-6
2.02418.00-11
2.53011.25-16
3.0362.00-21

Every 0.50 s, x goes up by 6.0 m, so vx = 6.0/0.50 = 12 m/s. The vertical steps change. From 0 to 0.50 s, the average vy is (23.25 - 20.00)/0.50 = 6.5 m/s. It belongs at the middle of that interval, 0.25 s. From 0.50 to 1.00 s it is (24.00 - 23.25)/0.50 = 1.5 m/s, at 0.75 s.

ay = (1.5 - 6.5) / (0.75 - 0.25) = -10 m/s2

Test the model with a video

  1. Set up: fix the camera at right angles to the motion. Put a metre rule in the same plane as the ball.
  2. Read: track the same point, such as the centre of the ball, in each frame. Use the real time of each frame.
  3. Work out: find average velocities over each interval and plot them at the middle of the interval.
  4. Judge: look for steady vx and a vy that falls at about g. Look at the overall trend, not one odd reading.

A scale that is not in the plane of the motion makes every length wrong in the same way. Repeating the video does not remove that error. Air resistance makes a long or fast flight drift from the model.

A real example. In 1951, Harold Edgerton of MIT photographed a bouncing golf ball with a flash that fired 60 times a second. Each image of the ball is 1/60 s after the one before. So one photograph is a ready-made table of positions at equal times.

Plot an interval's average velocity at the middle of the interval, not at its end. Then the time between two velocities is the time between the two midpoints.

Check your understanding

A video gives a ball's height every 0.10 s: 1.000 m, 1.151 m and 1.204 m. Up is positive. What vertical acceleration do these readings give?

  1. -9.8 m/s2
  2. -4.9 m/s2
  3. -0.98 m/s2
Show the answer

-9.8 m/s2

The average velocities are (1.151 - 1.000)/0.10 = 1.51 m/s at 0.05 s and (1.204 - 1.151)/0.10 = 0.53 m/s at 0.15 s. a = (0.53 - 1.51)/0.10 = -9.8 m/s2.