Lesson 9 of 11
Elastic energy from a curved graph
I can use force-extension graph area to determine elastic potential energy.Syllabus
Syllabus 9478, 4(k). Use force-extension graph area to determine elastic potential energy.
Make a guess. You are not marked.
A rubber band is stretched, then allowed to go back slowly. How does the energy it gives back compare with the work done to stretch it?
Show the answer
It is less, because some of the work warms the rubber.
For rubber, the unloading graph lies below the loading graph. The area between them is energy that warms the band.
When the force-extension graph is not a straight line through the origin, find the area in pieces. Do not use ½kx2.
This model joins its points with straight lines. Loading is slow and the material springs back fully.
| Extension x / m | Force F / N |
|---|---|
| 0.000 | 0.0 |
| 0.020 | 1.0 |
| 0.040 | 3.0 |
| 0.060 | 6.0 |
Each piece is a trapezium. Its area is the mean force times the extra extension:
- 0 to 0.020 m: (0 + 1.0)/2 × 0.020 = 0.010 J
- 0.020 to 0.040 m: (1.0 + 3.0)/2 × 0.020 = 0.040 J
- 0.040 to 0.060 m: (3.0 + 6.0)/2 × 0.020 = 0.090 J
The total stored from zero is 0.140 J. The energy added from 0.020 m to 0.060 m is 0.040 + 0.090 = 0.130 J.
One triangle from the origin to the last point gives ½ × 0.060 × 6.0 = 0.180 J. That is too big, because it does not follow the graph. If extension is in cm, change it to m before you find the area in J.
Loading and unloading
Measure the length with no load first. Then take readings as you add loads, and again as you take them off. If the unloading graph lies below the loading graph, the material gives back less energy than you put in. The area between the two graphs is energy that warms the material.
A real example. Vernier, a maker of school sensors, describes hanging a rubber band from a force sensor, with a motion detector below it. It took more force to stretch the band than the band gave back as it returned. The space between the loading and unloading graphs is the energy lost.
Using ½kx2, or one big triangle, for a curved graph. ½kx2 only works for a straight line through the origin.
Check your understanding
A reversible force-extension model joins (0.020 m, 1.0 N), (0.040 m, 3.0 N) and (0.060 m, 6.0 N) with straight segments. Loading is slow and dissipation is negligible. What additional elastic energy is stored from 0.020 m to 0.060 m?
Show the answer
0.130 J
Add the two trapezia: (1 + 3)/2 x 0.020 = 0.040 J and (3 + 6)/2 x 0.020 = 0.090 J. Their sum is 0.130 J. These areas are exact for the stated straight segments.