8867 / 2027
Currents overview

Lesson 2 of 6

Drift velocity

  • I can explain current as the rate of charge flow and use I = Q/t.Syllabus

    Syllabus 8867, 8(a). Explain current as the rate of charge flow and use I = Q/t.

  • I can derive and apply I = nAvq for a current-carrying conductor, with carrier number density and drift velocity defined.Syllabus

    Syllabus 8867, 8(b). Derive and apply I = nAvq for a current-carrying conductor, with carrier number density and drift velocity defined.

The current in a wire is I = nAvq. A metal wire holds a huge number of free electrons. So even a slow drift, a fraction of a millimetre per second, gives a current of amperes.

Count the carriers that cross a section

Take a wire of cross-sectional area A. It has n free charge carriers in each cubic metre: n is the number density, in m-3. Each carrier has charge q, and they drift along the wire with mean speed v, the drift velocity.

Count charge crossing one section

Electrons fill the whole wire. The shaded slice is a way of counting them, not a packet moving through an empty wire.

A one-millimetre drift length sweeps carriers across a marked cross-sectionA wire with electrons all along it and a marked counting plane. In time delta t, the electrons in a slice of length v delta t cross the plane.Counting planeCurrent Iv Δt = 1.00 mmMean electron driftCross-section A = 1.00 mm2

With n = 8.00 × 1028 m-3, the slice holds 8.00 × 1019 electrons: 12.8 C in 5.00 s, so I = 2.56 A.

Irregular motion and net drift are different

Varied individual motions coexist with a small mean drift opposite to currentElectrons move fast in random directions, with a slow net drift one way. Conventional current points the other way.Individual irregular motionsMean electron driftConventional current

Arrow lengths do not compare drift speed with current. The circuit responds quickly, even though each electron drifts slowly.

In time Δt, every carrier within a distance vΔt of the plane crosses it. The electrons also move fast at random, but only the slow drift carries the current.

In time Δt, each carrier drifts a distance vΔt. So the carriers that cross the plane fill a volume AvΔt. That volume holds nAvΔt carriers, with total charge:

Q = nAvΔt × q
I = Q/Δt = nAvq

Here q is the size of the carrier's charge, e for an electron. Check the units: m-3 × m2 × m/s × C = C/s = A.

Worked carrier model

Slow drift, sizeable current

Use n = 8.00 × 1028 m-3, A = 1.00 mm2 = 1.00 × 10-6 m2, v = 2.00 × 10-4 m/s and q = 1.60 × 10-19 C.

I = (8.00 × 1028)(1.00 × 10-6)
× (2.00 × 10-4)(1.60 × 10-19)
= 2.56 A

Check it by counting. In 5.00 s, each electron drifts only vt = 1.00 mm. The slice holds nAvt = 8.00 × 1019 electrons, which carry 12.8 C. And 12.8/5.00 = 2.56 A.

A wire with half the area, carrying the same current, needs twice the drift speed: 4.00 × 10-4 m/s.

Try it step by step

Work it out in steps: Cross-sectional area A in mm2, then Drift velocity v = I / (n A e) in mm/s.

  1. Problem 1. A copper wire of diameter 1.0 mm carries a current of 2.0 A. Copper has 8.5 x 1028 free electrons per m3 and e = 1.6 x 10-19 C. Find the drift velocity of the electrons.
  2. Problem 2. A copper wire of cross-sectional area 2.0 mm2 carries 5.0 A. Use n = 8.5 x 1028 per m3 and e = 1.6 x 10-19 C. Find the drift velocity.
  3. Problem 3. A copper wire of diameter 0.50 mm carries 1.0 A. Use n = 8.5 x 1028 per m3 and e = 1.6 x 10-19 C. Find the drift velocity.
Show the answer

Problem 1.

Cross-sectional area A in mm2: A = pi x 1.02 / 4 = 0.785 mm2 = 7.85 x 10-7 m2

Drift velocity v = I / (n A e) in mm/s: v = 2.0 / (8.5 x 1028 x 7.85 x 10-7 x 1.6 x 10-19) = 1.87 x 10-4 m/s = 0.187 mm/s (3 sf)

Problem 2.

Cross-sectional area A in mm2: A = 2.0 mm2 = 2.0 x 10-6 m2

Drift velocity v = I / (n A e) in mm/s: v = 5.0 / (8.5 x 1028 x 2.0 x 10-6 x 1.6 x 10-19) = 1.84 x 10-4 m/s = 0.184 mm/s (3 sf)

Problem 3.

Cross-sectional area A in mm2: A = pi x 0.502 / 4 = 0.196 mm2 = 1.96 x 10-7 m2

Drift velocity v = I / (n A e) in mm/s: v = 1.0 / (8.5 x 1028 x 1.96 x 10-7 x 1.6 x 10-19) = 3.75 x 10-4 m/s = 0.375 mm/s (3 sf)

Why a lamp lights at once

Electrons fill the whole circuit before you close the switch. When you close it, they all start to drift almost at once, so the lamp responds quickly. No electron needs to travel from the cell to the lamp first.

A real example. HyperPhysics, at Georgia State University, works out drift speeds for copper wire and notes that the drift is very slow. It explains that the change, or "signal", travels along the wire at nearly the speed of light.

Change mm2 to m2 before using I = nAvq: 1 mm2 = 1 × 10-6 m2, not 10-3 m2. For a diameter, find the area with πd2/4 first.

Check your understanding

A wire carries a fixed current with drift-speed magnitude 2.00 x 10-4 m/s. A second wire has half the cross-sectional area, with the same current, carrier density and carrier-charge magnitude. What is its drift speed?

  1. 2.00 x 10-4 m/s
  2. 4.00 x 10-4 m/s
  3. 1.00 x 10-4 m/s
Show the answer

4.00 x 10-4 m/s

v = I/(nAq), so halving A doubles v when the other stated quantities remain fixed. This is a fixed-current comparison, not a claim about connecting any thinner wire to the same voltage.