Lesson 10 of 10
Loading a potential divider
I can solve one-source series/parallel circuits, including potential dividers using NTC thermistors and LDRs.Syllabus
Syllabus 8867, 9(j). Solve one-source series/parallel circuits, including potential dividers using NTC thermistors and LDRs.
Make a guess. You are not marked.
Two 1.0 megohm resistors divide a 10 V supply. A voltmeter of resistance 10 megohm is connected across the lower one. What does it read?
Show the answer
A little less than 5.0 V: about 4.8 V.
The meter is in parallel with the lower resistor: 1.0 and 10 megohm give 0.91 megohm. The output is 10 x 0.91/1.91 = 4.8 V.
Anything connected across a divider's output is in parallel with the lower arm. It lowers that arm's resistance, so the output falls.
Two 4.0 kΩ resistors across 8.0 V give an output of 4.0 V. Now connect a 4.0 kΩ load across B and C. It is in parallel with the lower resistor, not in series with the divider.
The load is another B/C branch
The parallel load changes the lower equivalent resistance. Output is 2.67 V; each lower branch carries about 0.667 mA.
Worked loaded divider
VBC = 8.0 × 2.0/(4.0 + 2.0) = 2.67 V
The supply current is 8.0/6000 = 1.33 mA, and it splits equally between the two lower branches. The output has fallen from 4.0 V to 2.67 V.
A voltmeter is a load too. If its resistance is much larger than the lower arm, it hardly changes the output. If not, it lowers the reading. So choose a meter with a high resistance for high-resistance circuits.
A real example. Fluke's datasheet for its 117 multimeter gives an input impedance of more than 10 MΩ on its d.c. voltage range. Across a 1 kΩ resistor, that hardly matters. Across a 1 MΩ resistor, it lowers the reading noticeably.
Do not put the load in series with the lower resistor. It joins the same two points, B and C, so it is in parallel.
Check your understanding
Two 4.0 kilohm divider arms connect across an ideal fixed 8.0 V supply. A 4.0 kilohm load is then connected across the lower arm B/C. What is V_B - V_C?
Show the answer
2.67 V
The lower arm and load are parallel, giving 2.0 kilohm. The new output is 8.0 x 2.0/(4.0 + 2.0) = 8/3 V.