Lesson 8 of 8
Earthing and double insulation
I can explain earthing metal casings and double insulation.Syllabus
Syllabus K323, 16(f). Explain earthing metal casings and double insulation.
Make a guess. You are not marked.
A hair dryer has a plastic case and a cable with only two wires, live and neutral. Is it unsafe because it has no earth wire?
Show the answer
No, if it is double insulated.
A double-insulated appliance has two separate layers of insulation between the live parts and anything you can touch. Live cannot reach the outside, so it needs no earth wire.
A metal case must be earthed. If a live wire touches it, the earth wire carries a large current that melts the fuse and cuts off the live supply.
The fuse is in the live wire. For a fixed p.d., a low resistance gives a large current.
Why a metal case needs an earth wire
Metal conducts. If a loose live wire touches the metal case of an appliance, the whole case becomes live. Without an earth wire, it stays at the live voltage. Anyone who touches it gets a shock, as current flows through them to the ground.
How the earth wire makes the fuse melt
The neutral and earth wires are separate in the appliance. They are joined only at the supply. The arrows show one instant, because a.c. keeps reversing.
Normal use: current in live and neutral
Purple arrows: the normal current
The working circuit is live, load and neutral. The earth wire is joined to the case but carries no current.
Fault: live touches the case
Orange arrows: the fault current
The fault makes a new path through the case and the earth wire. Its resistance is very low, so a large current flows and the fuse in live melts.
The small pale blocks are insulators where the wires pass through the case.
How the earth wire protects you
- Live touches the metal case.
- The earth wire gives the current a path of very low resistance from the case back to the supply.
- So a very large current flows from live, through the case and the earth wire.
- This current is far above the fuse rating, so the fuse in the live wire melts.
- The appliance is cut off from live. The case is no longer at a high voltage, so it is safe to touch.
Double insulation
Two layers between live parts and you
A cut-away view of two layers of insulation. The square inside a square marks a double-insulated appliance.
- Basic insulation covers the live parts.
- Extra insulation is a separate second layer between them and the outside.
Some appliances have a plastic case and are double insulated. Two separate layers of insulation keep the live parts away from anything you can touch. They need no earth wire, so their cable has only live and neutral.
A double-insulated appliance is labelled with the words "double insulated" or with its symbol, a square inside a square. Phone chargers are usually built this way.
A plastic case alone does not make an appliance double insulated. Look for the square-inside-a-square mark.
The earth wire does not make the case safe on its own. It carries the large current that melts the fuse. Mention both the earth wire and the fuse in the live wire.
Check your understanding
A live wire contacts an earthed metal casing. In the stated fault model, the protective earth gives a low-resistance return to the supply and the live-wire overcurrent protection is suitable. How does this arrangement protect?
Show the answer
A large fault current flows through a complete return path, allowing the protection to interrupt live.
The low-resistance protective path keeps the casing closer to earth potential and allows sufficient fault current for the appropriate fuse or breaker to open live. The path and device must both be suitable; earth is not the normal load return.
Practise an exam question
Write your answer first, then tick the mark points it makes.
Exam-style question
A washing machine has a metal case connected to the earth wire. A fault makes the live wire touch the case. Explain how the earth wire and the fuse together protect a person who then touches the case. [3]
Saved on this browser only. Anyone using this browser can see it.