K323 / 2027
Current of electricity overview

Lesson 8 of 8

I-V graphs

  • I can sketch and interpret I-V characteristics for an ohmic conductor, filament lamp and semiconductor diode.Syllabus

    Syllabus K323, 14(k). Sketch and interpret I-V characteristics for an ohmic conductor, filament lamp and semiconductor diode.

Make a guess. You are not marked.

A diode in a circuit lets a current flow. The diode is turned round, and nothing else changes. What happens to the current?

  1. It reverses direction but keeps the same size.
  2. It falls to almost zero, because the diode is now in reverse.
  3. It stays the same, because turning a component round does not change the circuit.
Show the answer

It falls to almost zero, because the diode is now in reverse.

A diode lets current flow easily in one direction. Turned round, it is in reverse, so almost no current flows.

An I-V graph shows how the current through a component changes with the p.d. across it. Its shape tells you whether the resistance stays the same.

These graphs put current I on the vertical axis and p.d. V on the horizontal axis. A hotter metal has more resistance.

Three shapes to know

Negative values mean that the p.d. and the current are reversed: the supply has been turned round.

Current on the vertical axis, p.d. on the horizontal axis

The wire and lamp graphs use the same scales. Dots mark the readings. The dashed negative halves show the same shapes for a reversed supply.

Metal wire at constant temperature

Metal wire at constant temperatureCurrent I in amperes is on the vertical axis and p.d. V in volts is on the horizontal axis. A straight line passes through the origin and the readings 2 volts, 0.10 ampere; 4 volts, 0.20 ampere; and 6 volts, 0.30 ampere. The dashed negative half has the same shape. V divided by I is 20 ohm at every point. The p.d. ticks are 2 volts apart and the current grid lines are 0.10 ampere apart. The axes cross at zero.-6-4-20246-0.4-0.3-0.2-0.100.10.20.30.4Current I / APotential difference V / V

Marked readings (V, I):

  • (2 V, 0.10 A)
  • (4 V, 0.20 A)
  • (6 V, 0.30 A)

The straight line through the origin has a constant gradient. At each point, V/I = 20 Ω.

Filament lamp: the curve gets flatter

Filament lamp: the curve gets flatterThe axes and scales are the same as for the wire. A smooth curve passes through the origin and the readings 2 volts, 0.20 ampere; 4 volts, 0.30 ampere; and 6 volts, 0.36 ampere. The curve gets flatter as V gets bigger. The dashed negative half has the same shape. V divided by I is 10, about 13.3 and about 16.7 ohm at the three readings. The p.d. ticks are 2 volts apart and the current grid lines are 0.10 ampere apart. The axes cross at zero.-6-4-20246-0.4-0.3-0.2-0.100.10.20.30.4Current I / APotential difference V / V

Marked readings (V, I):

  • (2 V, 0.20 A)
  • (4 V, 0.30 A)
  • (6 V, 0.36 A)

As the filament heats up, the curve gets flatter and V/I increases. For resistance, use V/I at a point, not the gradient.

Diode: forward and reverse are different

A qualitative diode characteristicCurrent I is on the vertical axis and p.d. V on the horizontal axis. Positive V is the forward direction. The forward current rises more and more steeply. For negative V, the reverse current is very small. It is drawn just below the axis so that its sign shows. The graph has no number scale. It passes through the origin.IV0Negative VPositive VForwardcurrent risesVery smallreverse currentQualitative: no numerical scale

Positive V is the forward direction on this graph. In reverse, the current is almost zero over the range shown.

The wire at constant temperature gives a straight line through the origin. The lamp's curve gets flatter as the filament heats up. The negative halves show the same shapes for a reversed supply. The diode graph has no scale: a large current flows one way and almost none the other way.
Metal wire at constant temperature
A straight line through the origin, into both the positive and the negative parts of the graph. The current is proportional to the p.d., so V/I stays the same. A component like this is called an ohmic conductor.
Filament lamp
A curve through the origin that gets less steep as V gets bigger, in both directions. The filament heats up, so its resistance rises. Doubling the p.d. does not double the current.
Semiconductor diode
In the reverse direction, almost no current flows. In the forward direction, the current stays tiny at first and then rises steeply. A diode lets current flow one way.

For a silicon diode, the current starts to rise steeply at a forward p.d. of about 0.6 V to 0.7 V. John Ambrose Fleming patented an early diode, a vacuum valve, in 1904.

Forward and reverse depend on which way round the diode is in the circuit. Check the circuit diagram before you decide which half of the graph applies.

Find resistance from a graph

At any point on the graph, R = V/I for that point. For a straight line through the origin, the gradient is I/V, which is 1/R. The wire's line passes through 6.0 V and 0.30 A. Its gradient is 0.30/6.0 = 0.050 A/V, so R = 1/0.050 = 20 Ω. A steeper straight line means a smaller resistance.

On a curve, do not use the gradient. Use V/I at the point you want. The lamp's reversed reading of -6.0 V and -0.36 A still gives a positive resistance: (-6.0)/(-0.36) = 16.7 Ω. If a graph puts V on the vertical axis instead, a straight line's gradient is R itself.

Take the readings

Use a low-voltage supply that you can vary. Put an ammeter in series with the component and a voltmeter across it. Record pairs of V and I, then plot I against V. For the negative half, switch off, turn the supply connections round, and record the readings as negative values.

Draw the lamp graph as a curve through the origin. A straight line loses the mark. The curve flattens because the hot filament has more resistance, not because the lamp uses up current.

Check your understanding

Which of these I-V graphs, with current on the vertical axis, shows a component whose resistance stays the same?

  1. A curve through the origin that gets less steep as V increases.
  2. A line that stays near zero in reverse, then rises steeply once the forward p.d. is large enough.
  3. A straight line through the origin, with a gradient that does not change.
Show the answer

A straight line through the origin, with a gradient that does not change.

On a straight line through the origin, I is proportional to V, so V/I is the same at every point. That is an ohmic conductor, such as a metal wire at constant temperature.