K326 / K327 / 2027
General properties of waves overview

Lesson 4 of 9

Reading wave graphs

  • I can define and use speed, frequency, wavelength, period and amplitude, including graphical representations.Syllabus

    Syllabus K326 / K327, 9(c). Define and use speed, frequency, wavelength, period and amplitude, including graphical representations.

Make a guess. You are not marked.

A graph shows the displacement of one point on a rope against time. What does the gap between two neighbouring peaks give?

  1. The wavelength of the wave.
  2. The amplitude of the wave.
  3. The period of the wave.
Show the answer

The period of the wave.

The horizontal axis is time. From one peak to the next, the point completes one oscillation, so the gap is the period.

A displacement-distance graph shows many points at one instant, so it gives the wavelength. A displacement-time graph follows one point, so it gives the period.

This lesson uses amplitude, wavelength, period and f = 1/T.

Read the same rope wave in two ways

This wave travels to the right. Its amplitude is 2.0 cm, its wavelength is 0.80 m and its period is 0.40 s. The first graph is a snapshot at t = 0. The second follows the marked point at x = 0.20 m.

Two graphs describe the same right-moving rope wave

Amplitude is 2.0 cm, wavelength is 0.80 m and period is 0.40 s. The wave speed is 2.0 m/s. The orange point in the snapshot is the material point followed by the time graph.

Snapshot at t = 0 s

Snapshot at t = 0 s: signed displacement in centimetresHorizontal position ranges from zero to 1.60 metres. At time zero, crests are at 0.20 and 1.00 metres and troughs at 0.60 and 1.40 metres. A bracket between adjacent crests marks the 0.80 metre wavelength. The orange marker is at position 0.20 metres and displacement plus 2.0 centimetres. Both graphs use the same vertical scale from minus 2.0 to plus 2.0 centimetres. The bracket A on the right spans zero to plus 2.0 centimetres, so amplitude is 2.0 centimetres, not the 4.0 centimetre peak-to-peak span. These are different horizontal quantities, not two wave shapes at different instants.Displacement / cmWavelength = 0.80 m-20+20.00.40.81.21.6APosition along rope / m

Different points on the rope, all at one instant: read wavelength from the position axis.

One point at x = 0.20 m

One point at x = 0.20 m: signed displacement in centimetresTime ranges from zero to 0.80 seconds for the one material point at position 0.20 metres. Its displacement starts at plus 2.0 centimetres, reaches zero at 0.10 seconds, minus 2.0 at 0.20, zero at 0.30 and plus 2.0 again at 0.40. The cycle repeats. A bracket marks the 0.40 second period. Both graphs use the same vertical scale from minus 2.0 to plus 2.0 centimetres. The bracket A on the right spans zero to plus 2.0 centimetres, so amplitude is 2.0 centimetres, not the 4.0 centimetre peak-to-peak span. These are different horizontal quantities, not two wave shapes at different instants.Displacement / cmPeriod = 0.40 s-20+20.00.20.40.60.8ATime / s

One point on the rope, followed through time: read period from the time axis.

Both graphs have displacement on the vertical axis. The distance graph compares different points on the rope at one instant. The time graph follows the single point at x = 0.20 m.

Earthquake stations use an instrument called a seismometer. It follows the ground at one place as time passes. Its record, called a seismogram, has time on the horizontal axis, like the second graph.

Reading the snapshot

Displacement against distance

The crests are at x = 0.20 m and x = 1.00 m. Their separation is λ = 1.00 - 0.20 = 0.80 m. The troughs at 0.60 m and 1.40 m are also 0.80 m apart.

The maximum displacement from zero is A = 2.0 cm. From +2.0 cm at a crest to -2.0 cm at a trough is 4.0 cm, twice the amplitude.

The horizontal axis is position, so this graph gives no time for a cycle. You cannot find the frequency from the crest spacing alone.

Reading the time trace

Displacement against time

The marked point starts at +2.0 cm. It reaches its rest position at 0.10 s and -2.0 cm at 0.20 s. It passes rest again at 0.30 s and is back at +2.0 cm at 0.40 s.

That is one complete cycle: T = 0.40 s and f = 1/0.40 = 2.5 Hz. Its amplitude is still 2.0 cm.

This horizontal axis is time. The gap between two peaks is a time, not a wavelength.

A displacement graph does not show wave speed

On the time trace, a rising line means the marked point is moving in the positive direction. It does not mean the wave is speeding up. A negative displacement means the point is below its rest position. It does not mean the wave travels to the left.

Read values from the axes and their scales. The width of the graph on a phone or a page is not the wavelength or the period.

Check the horizontal axis first. A distance snapshot gives spacing. A time trace at one point gives timing. The two graphs can look the same and still tell you different things.

Check your understanding

A displacement-distance snapshot has crests at 0.20 m and 1.00 m, with maximum displacement +2.0 cm and minimum -2.0 cm. What can be read from this snapshot alone?

  1. Amplitude 2.0 cm and wavelength 0.80 m; the period needs time information.
  2. Frequency 0.80 Hz because two adjacent crests are 0.80 m apart.
  3. Amplitude 4.0 cm and period 0.80 s.
Show the answer

Amplitude 2.0 cm and wavelength 0.80 m; the period needs time information.

Amplitude is measured from equilibrium to a maximum displacement, and wavelength is the separation of equivalent adjacent points: 1.00 - 0.20 = 0.80 m. A snapshot has a position axis, so it does not provide the time for one oscillation.