K326 / K327 / 2027
Thermal processes overview

Lesson 2 of 6

Conduction

  • I can explain conduction in solids using particle vibration and, in metals, mobile electrons.Syllabus

    Syllabus K326 / K327, 8(b). Explain conduction in solids using particle vibration and, in metals, mobile electrons.

  • I can apply conduction, convection and radiation to everyday situations and designs.Syllabus

    Syllabus K326 / K327, 8(e). Apply conduction, convection and radiation to everyday situations and designs.

Make a guess. You are not marked.

A metal spoon and a wooden spoon have been in the same room all day. You touch each one. Which feels colder, and why?

  1. Neither. They are at the same temperature, so they feel the same.
  2. The metal, because metal is at a lower temperature.
  3. The metal, because it conducts energy away from your hand faster.
Show the answer

The metal, because it conducts energy away from your hand faster.

Both spoons are at room temperature. Metal is a much better thermal conductor, so energy leaves your warmer hand quickly, and that fast loss feels cold.

Conduction transfers energy through a material as neighbouring particles act on one another. Metals conduct well because their mobile electrons carry energy too.

Net heating transfers energy from a hotter region to a cooler one. Temperature relates to the average random kinetic energy of the particles.

How a solid conducts

Particles at the hotter end of a solid vibrate with greater average kinetic energy. They act on their neighbours and pass energy on. In this way energy is transferred along the solid towards the cooler region.

The atoms or molecules stay near their usual positions while they vibrate. The solid does not conduct by sending its hot particles in a stream from one end to the other.

In a metal, mobile electrons give a second way to transfer energy. Electrons move through the metal and exchange energy with its particles and with other electrons. They move in both directions, but the net transfer is from the hotter region towards the cooler one.

Energy passes through the solid towards the cooler region

The large circles mark fixed mean positions. Particles at both ends vibrate; the solid does not flow along the strip.

Vibrations in a solid

Vibrations in a solid: net energy transfer from the hotter left end to the cooler right endA solid strip has its hotter end on the left and its cooler end on the right. Large particles occupy fixed mean positions in two rows. Blue double-ended arrows indicate vibration about those positions. The larger indicators at the hotter end are qualitative. Neighbouring particles interact and transfer energy; neither end has stationary particles. A separate orange arrow below the strip points right and represents net energy transfer, not the path of a particle. The models and arrow sizes are schematic.Hotter endCooler endNet energy transfer

Blue double arrows: vibration about fixed positions. Neighbouring particles transfer energy through their interactions.

An additional mechanism in a metal

An additional mechanism in a metal: net energy transfer from the hotter left end to the cooler right endA solid strip has its hotter end on the left and its cooler end on the right. Large particles occupy fixed mean positions in two rows. Small blue dots represent mobile electrons in a metal. Their blue motion arrows point in varied directions, including towards both ends. Electrons transfer energy through interactions. The large metal particles also vibrate, although their vibration indicators are omitted in this panel. The diagram does not show a one-way electric current. A separate orange arrow below the strip points right and represents net energy transfer, not the path of a particle. The models and arrow sizes are schematic.Hotter endCooler endNet energy transfer

Small blue dots and arrows: mobile electrons and their motion. They provide an additional way to transfer energy through a metal.

The orange arrows show the direction of net energy transfer. Their lengths do not measure transfer rates.

The solid particles vibrate near fixed positions, including at the cooler end. Mobile electrons add another way to transfer energy in the metal. The direction of net energy transfer is not the same as the motion of any one particle or electron.

Conductors and insulators have different rates

For samples of the same size with the same temperature difference, a good thermal conductor transfers energy more readily than a thermal insulator. An insulator slows conduction. It does not make all energy transfer impossible.

A metal pan base helps transfer energy from a hotter hob to the cooler contents. A suitable insulating handle slows conduction towards a hand. The useful material depends on whether the design should help a transfer or reduce it.

Worked explanation

Metal and wood at the same room temperature

A metal block and a wooden block have both reached 20°C in a room. A hand is warmer than either block.

  1. Direction: energy leaves the warmer hand and enters the cooler block in both cases.
  2. Rate: the metal conducts energy away from the contact region more readily than the wood.
  3. Observation: the hand cools faster in contact with the metal, so the metal can feel colder even though both blocks started at the same temperature.

The feeling depends on the rate at which the hand loses energy. It is not evidence that the metal began at a lower temperature.

Name the net transfer and how it happens. In solid conduction, particles act on their neighbours and transfer energy without bulk flow of the solid. In metals, include mobile electrons as well as vibrating particles.

Check your understanding

A metal block and a wooden block have both been in a 20 degrees C room long enough to reach that temperature. A warmer hand touches each. Why can the metal feel colder?

  1. The metal transfers a substance called cold into the hand.
  2. The metal must have started below 20 degrees C, because it feels colder to touch.
  3. Energy leaves the hand more rapidly through the better-conducting metal.
Show the answer

Energy leaves the hand more rapidly through the better-conducting metal.

The metal conducts energy away from the contact region more readily, so the hand cools faster. The direction of net heating is from the warmer hand to the cooler block in both cases.