K223 / K224 / 2027
Electromagnetic spectrum overview

Full chapter

Electromagnetic spectrum

All 6 topics and the revision summary on one page.

01

Spectrum order and shared properties

In short

  • All electromagnetic waves are transverse and can cross a vacuum.
  • In a vacuum they all travel at the same speed: 3.0 x 108 m/s.
  • In order of rising frequency: radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, gamma rays. Wavelength falls along the same list.

Make a guess. You are not marked.

A radio wave and an X-ray are sent across the same vacuum at the same moment. Which arrives first?

  1. The radio wave, because it has the longer wavelength and so travels further.
  2. The X-ray, because it has more energy.
  3. They arrive together, because both travel at the speed of light.
Show the answer

They arrive together, because both travel at the speed of light.

Every electromagnetic wave travels through a vacuum at the same speed, 3.0 x 108 m/s. The waves differ in frequency and wavelength, not in speed.

Radio waves, light and gamma rays are all electromagnetic waves. In a vacuum they travel at the same speed, but they differ in frequency and wavelength.

Wavelength is the length of one complete wave. Frequency is the number of complete waves each second, in hertz (Hz).

What all electromagnetic waves share

All electromagnetic waves are transverse. Their vibrations are at right angles to the direction the wave travels. What vibrates is an electric field and a magnetic field, not particles of matter.

So these waves need no medium. They can cross a vacuum, and like all waves they carry energy from place to place.

In a vacuum they all travel at the same speed: c = 3.0 x 108 m/s. That is 300 000 km every second. In glass or water they travel more slowly.

Sunlight is a real case. Its infrared, visible light and ultraviolet leave the Sun together and cross empty space together. They all reach Earth about 8 minutes later.

More detail (optional)

A wavy line in a diagram shows how the field changes along the wave. It is not a path that the wave wiggles along.

The order of the seven regions

Read the same order in two directions

Going down the list, frequency rises and wavelength falls. All seven travel at the same speed in a vacuum.

The seven main regions ordered by frequency and wavelengthFrom top to bottom, the regions are radio waves, microwaves, infrared, visible light, ultraviolet, X-rays and gamma rays. An arrow pointing down on the right marks increasing frequency. An arrow pointing up on the left marks increasing wavelength. Visible light sits between infrared and ultraviolet. The boxes are the same height, but the regions do not cover equal ranges.Radio wavesMicrowavesInfraredVisible lightUltravioletX-raysGamma raysIncreasing wavelengthIncreasing frequencyOrder only, not drawn to scale

Visible light, enlarged

Red has the longest wavelength of visible light and violet the shortestA colour strip has red at the left and violet at the right. Words label both ends. The frequency arrow points right, towards violet. The wavelength arrow points left, towards red. The strip is not drawn to scale.RedVioletIncreasing frequencyIncreasing wavelength

The seven names are labels for ranges that run into each other. Microwaves are often counted as the shortest radio waves.

From radio waves to gamma rays, frequency rises and wavelength falls. The boxes are not drawn to scale. In visible light, red has the longest wavelength and violet the shortest.

Increasing frequency: radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, gamma rays.

Increasing wavelength: gamma rays, X-rays, ultraviolet, visible light, infrared, microwaves, radio waves.

The two lists are the same order read in opposite directions. A wave with a higher frequency always has a shorter wavelength.

Visible light is the only region the eye can detect. Red light has the longest wavelength, roughly 700 nm, and the lowest frequency. Violet has the shortest wavelength, roughly 400 nm, and the highest frequency.

The spectrum has no gaps. The seven names are labels for ranges that run into each other.

A radio wave is not a sound wave

A radio station sends out radio waves. A radio set picks them up and uses the signal to drive a loudspeaker. Only then does the loudspeaker make sound waves in the air.

The two waves are different kinds. The radio wave is electromagnetic and transverse, and it can cross a vacuum. The sound wave is longitudinal and needs a medium such as air.

Higher frequency does not mean faster. In a vacuum a gamma ray and a radio wave travel at the same speed. Only their frequency and wavelength differ.

Check your understanding

Which of these lists three regions in order of increasing frequency?

  1. Radio waves, infrared, microwaves.
  2. Ultraviolet, visible light, infrared.
  3. Microwaves, visible light, X-rays.
Show the answer

Microwaves, visible light, X-rays.

Frequency rises from radio waves through microwaves, infrared, visible light, ultraviolet and X-rays to gamma rays. Wavelength falls along the same list.

Check your understanding

An astronaut on the Moon talks to Earth by radio. Which of these explains how the message crosses space?

  1. The radio wave pushes on the thin gas in space, and this gas passes the wave on to Earth.
  2. A radio wave carries it. Radio waves are electromagnetic, so they need no medium.
  3. The voice crosses space as a radio wave, because a radio wave is a sound wave of very high frequency.
Show the answer

A radio wave carries it. Radio waves are electromagnetic, so they need no medium.

Sound cannot cross the vacuum of space. A microphone turns the voice into a signal, a radio wave carries the signal, and a loudspeaker on Earth turns it back into sound.

02

Wavelength and frequency calculations

Make a guess. You are not marked.

Red light has a wavelength of about 700 nm and violet light about 400 nm. Which has the higher frequency in a vacuum?

  1. Violet, because it has the shorter wavelength.
  2. Red, because it has the longer wavelength.
  3. Neither. They travel at the same speed, so they have the same frequency.
Show the answer

Violet, because it has the shorter wavelength.

Both travel at the same speed c, and c = frequency x wavelength. So the shorter wavelength goes with the higher frequency.

In short

  • Speed = frequency x wavelength, so c = f x λ.
  • In a vacuum, c is 3.0 x 108 m/s for every electromagnetic wave.
  • Change MHz or GHz to Hz, and nm to m, before you calculate.

Every electromagnetic wave in a vacuum has the same speed c. So if you know its frequency you can find its wavelength, and the other way round.

This is v = fλ with v = c, the speed that all electromagnetic waves share in a vacuum.

c = fλ   so   λ = c/f   and   f = c/λc is 3.0 x 108 m/s, f is the frequency in Hz and λ is the wavelength in m. Since c is fixed, a higher frequency means a shorter wavelength.

Change the units first

Frequencies are often given in MHz or GHz, and short wavelengths in nm. Change them before you divide: 1 MHz = 106 Hz, 1 GHz = 109 Hz and 1 nm = 10-9 m.

Worked example

A radio station and an oven

The Singapore radio station Class 95 broadcasts at 95.0 MHz.

  1. Frequency in Hz: f = 95.0 x 106 = 9.50 x 107 Hz.
  2. Wavelength: λ = c/f = (3.0 x 108)/(9.50 x 107) = 3.2 m.

A microwave oven uses a frequency near 2.45 GHz, which is 2.45 x 109 Hz. Its wavelength is (3.0 x 108)/(2.45 x 109) = 0.12 m.

The oven's waves have the higher frequency and the shorter wavelength. Both would travel at c in a vacuum.

Try it step by step

Work it out in steps: Frequency in Hz, then Wavelength = c / f in m.

  1. Problem 1. A radio transmitter sends out waves at 150 MHz. Take c = 300000000 m/s (3.0 x 108 m/s). Find the wavelength. (1 MHz = 1000000 Hz.)
  2. Problem 2. A TV transmitter broadcasts at 600 MHz. Take c = 3.0 x 108 m/s. Find the wavelength.
  3. Problem 3. A Wi-Fi router transmits at 2400 MHz. Take c = 3.0 x 108 m/s. Find the wavelength.
Show the answer

Problem 1.

Frequency in Hz: f = 150 x 1000000 = 150000000 Hz, which is 1.5 x 108 Hz

Wavelength = c / f in m: wavelength = 300000000 / 150000000 = 2.0 m (2 sf)

Problem 2.

Frequency in Hz: f = 600 x 1000000 = 600000000 Hz, which is 6.0 x 108 Hz

Wavelength = c / f in m: wavelength = 300000000 / 600000000 = 0.50 m (2 sf)

Problem 3.

Frequency in Hz: f = 2400 x 1000000 = 2400000000 Hz, which is 2.4 x 109 Hz

Wavelength = c / f in m: wavelength = 300000000 / 2400000000 = 0.125 m, which is 0.13 m to 2 sf

From wavelength to frequency

Light has a wavelength of 600 nm, which is 6.00 x 10-7 m. Its frequency is f = c/λ = (3.0 x 108)/(6.00 x 10-7) = 5.0 x 1014 Hz.

Infrared of wavelength 1200 nm has twice that wavelength. So it has half the frequency: 2.5 x 1014 Hz.

Travel time

Equal paths through a vacuum

A radio signal and a pulse of light each cross 900 km of vacuum. Change the distance to 900 000 m.

t = distance/speed = 900 000/(3.0 x 108) = 0.0030 s = 3.0 ms.

Both take the same time. Their different frequencies do not matter.

Frequency and wavelength cannot both go up. Their product is the fixed speed c. If one doubles, the other halves.

Check your understanding

A 100 MHz signal and a 2.5 GHz signal start together and follow equal 900 km paths through vacuum. Which of these comparisons is correct?

  1. The 2.5 GHz signal arrives first because higher frequency means higher speed.
  2. They arrive together and must have the same wavelength because their speeds match.
  3. They arrive together; the 2.5 GHz signal has the shorter wavelength.
Show the answer

They arrive together; the 2.5 GHz signal has the shorter wavelength.

Both travel at the same vacuum speed and take 900000/(3.0 x 108) = 0.0030 s. At fixed speed, wavelength equals speed divided by frequency: the wavelengths are 3.0 m and 0.12 m respectively.

03

Uses of radio waves and microwaves

Make a guess. You are not marked.

A Wi-Fi router and a microwave oven both use microwaves near 2.4 GHz. Why does the oven cook food while the router does not?

  1. The oven uses a different kind of wave, one that carries heat and not a signal.
  2. The oven sends far more powerful microwaves into a closed metal box, where the food absorbs them.
  3. The router's microwaves travel more slowly, so they carry too little energy to heat food.
Show the answer

The oven sends far more powerful microwaves into a closed metal box, where the food absorbs them.

Heating depends on how much energy the food absorbs each second. The router sends out a weak signal that only has to be detected.

In short

  • Radio waves: radio and television broadcasts, astronomy, RFID tags.
  • Microwaves: mobile phones, satellite television, microwave ovens.
  • For any use, say what sends the wave, what the wave does and what picks it up.

Radio waves and microwaves are used mainly to carry information from a sender to a receiver. Microwaves are also used to heat food.

These two regions have the longest wavelengths in the spectrum. To explain any use, name the source, say what happens to the wave, and name the detector.

Radio waves

  • Radio and television communication: A transmitter sends out radio waves that carry the programme as a signal. An aerial picks up the waves. The set then turns the signal back into sound and pictures.
  • Astronomy: Stars and galaxies give out radio waves. A radio telescope collects these waves, so astronomers can study objects far out in space. In 1933 Karl Jansky reported radio waves coming from the Milky Way.
  • RFID tags: RFID stands for radio-frequency identification. A reader sends out radio waves. A small tag on an item answers with its own radio signal, which carries an identity number.

A contactless card works in a similar way. An EZ-Link card and the reader at an MRT gate exchange data by radio waves at 13.56 MHz. The card does not need to touch the reader.

Microwaves

  • Mobile phones: A phone and a base station send microwaves to each other. The microwaves carry calls and data as signals. Wi-Fi also uses microwaves, at 2.4 GHz and 5 GHz.
  • Satellite television: A ground station sends microwave signals up to a satellite. The satellite sends them down to dish aerials on the ground. The frequencies are chosen so that the signal passes through the atmosphere.
  • Microwave ovens: The oven fills a metal box with microwaves at about 2.45 GHz. Water in the food absorbs them, so the food's internal energy and temperature rise. The food does not become radioactive.

Signal or heater?

The same kind of wave can do two jobs. A Wi-Fi router sends out weak microwaves, and a receiver only has to detect them. An oven sends much stronger microwaves into a closed metal box, so that the food absorbs their energy.

Match each use to the right region. Mobile phones and satellite television use microwaves. Radio and television broadcasts, astronomy and RFID tags use radio waves. Naming the wrong region loses the mark.

Check your understanding

A student taps an EZ-Link card on the reader at an MRT gate. Which of these describes how the reader gets the card's details?

  1. The card must touch the reader so that a current can flow from the card into the gate.
  2. The reader shines infrared on the card and reads the infrared that bounces back.
  3. The reader sends out radio waves, and the card answers with a radio signal that carries its data.
Show the answer

The reader sends out radio waves, and the card answers with a radio signal that carries its data.

This is how radio-frequency identification works. Radio waves cross the small gap, so the card does not need to touch the reader.

04

Uses of infrared, visible light and ultraviolet

Make a guess. You are not marked.

In 1800 William Herschel split sunlight with a prism. He put a thermometer just beyond the red end of the colours, where he could see no light. What happened to the reading?

  1. It went up, because invisible radiation was reaching the thermometer.
  2. It stayed the same, because there is no radiation where there is no light.
  3. It went down, because the thermometer was now in shadow.
Show the answer

It went up, because invisible radiation was reaching the thermometer.

Herschel found a temperature rise beyond the red end. Sunlight contains infrared, which the eye cannot see but which heats whatever absorbs it.

In short

  • Infrared: remote controllers, intruder alarms, thermal imaging.
  • Visible light: photography, optical fibres in medicine and telecommunications.
  • Ultraviolet: sunbeds, checking bank notes, disinfecting water.

Infrared, visible light and ultraviolet sit side by side in the spectrum. The eye sees only visible light. Infrared and ultraviolet need other detectors.

Infrared has a lower frequency than red light. Ultraviolet has a higher frequency than violet light. Every warm object gives out infrared.

Infrared

  • Infrared remote controllers: A remote for a television has a small lamp. The lamp flashes infrared in a coded pattern. A detector on the set reads the pattern as a command, such as a change of channel.
  • Intruder alarms: A warm body gives out infrared. A passive infrared sensor picks up the change when a person moves across its view, and it sets off the alarm.
  • Thermal imaging: A thermal camera detects the infrared that objects give out. Warmer parts give out more, so the camera can draw a picture of temperature. Firefighters use these cameras to find people through smoke.

Which device sends and which receives?

Green arrows show infrared going from a source to a detector. The infrared itself cannot be seen.

A remote sends out a coded infrared signal

The remote is the infrared source and the appliance holds the receiverA remote on the left has an infrared lamp at its front. A green arrow labelled infrared runs from the lamp to a detector on the appliance at the right. The remote sends a coded signal, and the receiver reads it as a command. The arrow shows the direction of travel, not a beam that can be seen.RemoteReceiverInfraredSource: remoteAppliance detector

The remote sends. The receiver detects the coded signal and the appliance responds.

A passive intruder sensor receives infrared

A passive sensor receives infrared given out by a person and the roomA person at the left gives out infrared. A green arrow points from the person to a passive sensor at the right. A blue arrow under the person shows that the person is moving. It is not a wave. When the person moves, the pattern of infrared reaching the sensor changes. The sensor sends out no beam. The room also gives out infrared, which is not drawn.PersonPassivesensorInfraredPerson movesReceivesincoming IR

The person and the room give out infrared. When the person moves, the pattern reaching the sensor changes. The sensor sends out no beam of its own.

The remote sends out a coded infrared signal and the appliance receives it. The passive sensor sends out nothing. It receives infrared from the person and the room.

Visible light

  • Photography: A camera lens gathers visible light from a scene. A sensor or film records the pattern of light as a photograph.
  • Optical fibres in medicine: An endoscope is a thin tube used to look inside the body. Light travels down it to light up the inside. A bundle of optical fibres carries the image back to the doctor.
  • Optical fibres in telecommunications: Pulses of light travel along thin glass fibres. They carry data, such as internet traffic. Many long links use pulses of infrared instead, because the glass absorbs less of them.

Ultraviolet

  • Sunbeds: Lamps in a sunbed give out ultraviolet, which makes skin tan. The same ultraviolet damages skin cells and raises the risk of skin cancer.
  • Bank-note authentication: Some inks glow under an ultraviolet lamp. The ink takes in the ultraviolet and gives out visible light. Singapore's Portrait series notes have marks that show only under such a lamp.
  • Disinfecting water: Ultraviolet damages the DNA of germs, so they cannot multiply. Singapore's NEWater plants use it as the last of three stages. It deals with any bacteria and viruses still in the water.

Invisible does not mean undetectable

In 1800 William Herschel split sunlight into its colours with a prism. He moved a thermometer through the colours, then just past the red end, where he saw no light. The reading rose there too. Rays that the eye cannot see were heating the thermometer. We now call them infrared.

More detail (optional)

Each detector picks up only part of the spectrum. A thermal camera, a phone camera and a radio set each pick up a different part. If one shows nothing, waves of another kind may still be there.

You never see the infrared or the ultraviolet itself. A glowing bank note gives out visible light. A thermal image is drawn in colours that the camera chooses.

Check your understanding

An infrared remote operates a receiver, while a passive infrared intruder sensor detects a moving warm body. Which account correctly identifies the radiation sources?

  1. The moving body reflects the alarm sound, which is a kind of infrared.
  2. The remote emits infrared; the passive sensor detects infrared given off by the warm body.
  3. Both detectors must shine infrared beams at the object they detect.
Show the answer

The remote emits infrared; the passive sensor detects infrared given off by the warm body.

The remote sends an intentional signal to the appliance receiver. A passive intruder sensor detects changing incoming infrared, such as when a warm body moves across its view. Infrared is used in both, but the source and detector roles differ.

Check your understanding

A cashier shines an ultraviolet lamp on a bank note, and a hidden mark glows. Which of these explains what the cashier sees?

  1. The cashier sees ultraviolet that the mark reflects back to the eye.
  2. The ink absorbs ultraviolet and gives out visible light, which the eye can see.
  3. The lamp heats the ink until it is hot enough to glow.
Show the answer

The ink absorbs ultraviolet and gives out visible light, which the eye can see.

The eye cannot detect ultraviolet. The special ink takes in ultraviolet and gives out visible light, so the mark shows only under the lamp.

05

Uses of X-rays and gamma rays

Make a guess. You are not marked.

Why are X-rays used to make images of broken bones?

  1. X-rays make the bones glow, so the camera can see them.
  2. Bone absorbs X-rays much more than soft tissue, which lets most through.
  3. X-rays reflect off bone and bounce back to the detector.
Show the answer

Bone absorbs X-rays much more than soft tissue, which lets most through.

Where bone absorbs the X-rays, less reaches the detector behind, so bone shows up white. Soft tissue lets most X-rays pass, so it shows dark.

In short

  • X-rays: medical images of bones, security scans of bags, finding cracks inside metal parts.
  • Gamma rays: sterilising food, detecting cancer with a tracer, treating cancer.
  • An X-ray image uses a source outside the body. A tracer scan detects gamma rays that come from inside the body.

X-rays and gamma rays pass through many materials that stop light. So they can show what is inside an object, and they can reach cells deep inside the body.

These two regions have the highest frequencies in the spectrum. Both can damage living cells, so each use controls how much reaches people.

X-rays

  • Medical radiology: A machine sends X-rays through the body to a detector on the far side. Bone absorbs X-rays well, and soft tissue lets most of them through. So the detector records a shadow picture of the bones.
  • Security screening: An airport scanner sends X-rays through each bag. Dense objects absorb more, so their shapes show on the screen. Nobody has to open the bag.
  • Industrial defect detection: Engineers send X-rays through a metal part. A hidden crack or air gap absorbs less than solid metal, so it shows up on the image.

Wilhelm Roentgen discovered X-rays on 8 November 1895. Within weeks he had made an X-ray picture of the bones in his wife's hand.

Gamma rays

  • Sterilising food: Gamma rays kill the bacteria and insects that spoil food, so it keeps for longer. The food does not become radioactive. Gamma rays also sterilise medical equipment.
  • Detecting cancer: A patient is given a tracer, a substance that gives out gamma rays. The tracer collects in certain tissue. A gamma camera outside the body detects the rays and maps where the tracer is.
  • Treating cancer: Several narrow beams of gamma rays are aimed at a tumour to kill its cells. The beams cross at the tumour, so it gets a large dose. The healthy tissue around it gets less.

Two ways to make an image: find the source

Where the source is changes what the detector records

Arrows show the direction the waves travel. Both drawings are simple sketches, not real medical images.

X-ray image: source outside the object

An X-ray source outside an object sends X-rays through it to a detectorA source at the left sends X-rays towards an object in the middle. A detector is on the right, beyond the object. Three paths run from left to right. The middle path passes through a patch that absorbs more, so its arrow is fainter after the object. The detector records how much comes through along each path. No numbers are given.X-raysourceObjectDetectorCompare what comes through

The darker patch inside the object absorbs more. The fainter arrow after it shows that fewer X-rays reach the detector there.

Gamma-tracer scan: source inside the body

A tracer inside the body gives out gamma rays that a detector outside can pick upAn orange dot stands for a tracer inside the outline of a body. Three arrows leave the tracer in different directions. One leaves the body and reaches a detector outside. The source is inside, unlike the outside source in the X-ray drawing. The detector records only the gamma rays that reach it. The readings show where the tracer is.BodyDetectorTracerGamma raysSource inside; detector outside

Gamma rays that leave the body show where the tracer has collected. This is detecting. Treating cancer is a different job: it aims gamma rays at the tumour.

In the X-ray image the source is outside, and the detector records what passes through. In the tracer scan the source is inside, and the detector records what comes out.

An X-ray image and a tracer scan both need a detector outside the body. The difference is where the waves start. X-rays start outside and pass through. Gamma rays from a tracer start inside and come out.

Detecting and treating are different jobs too. A tracer scan uses a small amount of radiation to find tissue. Treatment uses a large dose on purpose, to kill cells.

"Radiation" is not an answer. Name the region: X-rays for a luggage scanner, gamma rays for sterilising. Then say what the waves do there.

Check your understanding

Which of these correctly compares an X-ray image of a hand with a gamma-tracer scan?

  1. In both, a beam from a machine passes through the body. Gamma rays are used when the body part is thicker.
  2. The X-rays come from a source outside the body. The gamma rays come from a tracer inside it.
  3. The X-rays make an image, while the gamma rays from the tracer are there to kill cancer cells.
Show the answer

The X-rays come from a source outside the body. The gamma rays come from a tracer inside it.

X-rays pass through the hand to a detector on the far side. In a tracer scan, the tracer inside the body gives out gamma rays, and a camera outside detects them.

06

Exposure effects

Make a guess. You are not marked.

Why can ultraviolet harm skin cells in ways that infrared of the same intensity cannot?

  1. Skin reflects infrared, so none of it is absorbed by the body.
  2. Ultraviolet travels faster, so it reaches deeper into the body.
  3. Ultraviolet has a higher frequency and can damage the DNA in skin cells.
Show the answer

Ultraviolet has a higher frequency and can damage the DNA in skin cells.

Higher-frequency radiation carries energy in larger amounts, so ultraviolet can damage DNA in skin cells and lead to skin cancer. Infrared mainly heats the skin.

In short

  • Microwaves and infrared heat the body. Too much heating causes burns.
  • Ultraviolet damages skin cells and can cause skin cancer.
  • X-rays and gamma rays are ionising. They knock electrons out of atoms and can damage cells and DNA.

When living tissue absorbs electromagnetic waves, it takes in their energy. Too much can harm cells in two ways: by heating them, or by ionising their atoms.

Radiation transfers energy without a medium. Only the part that the body absorbs can affect it.

Heating: absorbed energy raises the temperature

Microwaves and infrared mainly heat. When tissue absorbs them, its internal energy and its temperature rise. If the tissue gains energy faster than it can lose it, it gets hot enough to burn.

Heating explanation

The wave is absorbed → internal energy rises → temperature rises → too much heating damages tissue.

More detail (optional)

Heating does not make anything radioactive. And "non-ionising" does not mean harmless. A strong beam of microwaves can cause serious burns.

Ionisation: electrons are knocked out

Ionisation means knocking electrons out of atoms or molecules. This leaves charged particles called ions. X-rays and gamma rays do this, so they are called ionising radiation.

Inside a cell, ionisation can break or change molecules such as DNA. The cell may die. Or its damaged DNA may later lead to cancer.

Ionising explanation

The wave removes electrons → ions form and molecules change → cells are damaged or killed.

This damage does not need a rise in temperature. It is also why gamma rays can treat cancer: a large dose kills the cells of the tumour.

Ultraviolet: damage to skin and eyes

Ultraviolet from the Sun damages the DNA in skin cells. It causes sunburn and can lead to skin cancer. It can also damage the eyes.

Only the ultraviolet with the highest frequencies is ionising. Most ultraviolet, such as that from a sunbed, harms cells by changing their molecules in other ways. So do not write that all ultraviolet is ionising.

In Singapore, the National Environment Agency (NEA) reports a UV index through the day. It is usually highest between 11 am and 3 pm. Readings of 8 to 10 are rated very high. NEA then advises sunscreen of at least SPF 30, a hat, sunglasses and shade.

A useful wave is not a safe wave

Ultraviolet disinfects water because it damages living cells. For the same reason, the lamp is screened so that it cannot shine on people.

More detail (optional)

The harm depends on the type of wave, how strong it is, how long the exposure lasts and which tissue absorbs it. A short, weak exposure does far less damage than a long, strong one.

Name the mechanism. For microwaves and infrared, write about absorption and heating. For X-rays and gamma rays, write about ionisation and damage to cells or DNA. "It is dangerous" is too vague to score.

Check your understanding

A screened ultraviolet water-disinfection unit uses radiation that can damage microorganisms. Why does that useful effect not establish that unintended exposure of a person is harmless?

  1. Any radiation that does not ionise is unable to transfer energy or cause harm.
  2. Radiation can damage tissue; the effect depends on the type, intensity and exposure time.
  3. Ultraviolet is ionising like X-rays, so its effect is the same at every intensity and duration.
Show the answer

Radiation can damage tissue; the effect depends on the type, intensity and exposure time.

The ability to damage microorganisms explains the useful application, but it does not give immunity to nearby human tissue. UV can harm skin and eyes, and not every UV hazard is explained by ionisation. The amount absorbed and exposure conditions matter.

Check your understanding

An engineer stands too close to a powerful microwave transmitter. Which of these describes the main harm?

  1. The microwaves ionise atoms in the cells, as X-rays do.
  2. The microwaves make the engineer's body radioactive.
  3. Body tissue absorbs the microwaves and heats up, which can cause burns.
Show the answer

Body tissue absorbs the microwaves and heats up, which can cause burns.

Absorbed microwaves raise the internal energy and temperature of tissue. Microwaves are not ionising, so the harm comes from heating.

Revision summary

One spectrum, two orders

Increasing frequency, decreasing wavelength: radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, gamma rays.

Increasing wavelength, decreasing frequency: gamma rays, X-rays, ultraviolet, visible light, infrared, microwaves, radio waves. In visible light, red has the longest wavelength and violet the shortest.

Shared properties
All electromagnetic waves are transverse and travel at the same speed in a vacuum. They need no medium. Sound does.
Frequency and wavelength
c = fλ; λ = c/f; f = c/λ. Use c = 3.0 x 108 m/s. A higher frequency means a shorter wavelength at the same speed.
Prefix reminders
1 MHz = 106 Hz; 1 GHz = 109 Hz; 1 nm = 10-9 m. Change to Hz and m before you calculate.

Uses to recall and explain

Radio waves
radio and television communication; astronomy; RFID tags.
Microwaves
mobile phones; microwave ovens; satellite television.
Infrared
infrared remote controllers; intruder alarms; thermal imaging.
Visible light
photography; optical fibres in medicine; optical fibres in telecommunications.
Ultraviolet
sunbeds; bank-note authentication; disinfecting water.
X-rays
medical radiology; security screening; industrial defect detection.
Gamma rays
sterilising food; detecting cancer; treating cancer.

For any use, name the source, say what happens to the wave, and name the detector or the effect. A passive infrared alarm only receives. A remote sends out a coded signal. An X-ray image uses a source outside the body. A tracer scan detects gamma rays from a tracer inside the body.

Heating and ionising effects

  • Heating: absorbed microwaves and infrared raise internal energy and temperature. Too much heating damages tissue.
  • Ionisation: X-rays and gamma rays knock electrons out of atoms or molecules. This can damage cells and DNA.
  • Ultraviolet: it damages skin and eyes and can cause skin cancer. Only the highest-frequency ultraviolet is ionising.
  • Exposure: the harm depends on the type of wave, its strength, the time and the tissue. A useful wave is not a safe one.
Back to spectrum order

Practise exam questions

Write your answer first, then tick the mark points it makes.

Exam-style question

State three properties shared by all electromagnetic waves. [3]

Saved on this browser only. Anyone using this browser can see it.

Exam-style question

A radio station broadcasts at a frequency of 98.0 MHz. The speed of electromagnetic waves is 3.0 x 108 m/s. Calculate the wavelength of the radio waves. [3]

Saved on this browser only. Anyone using this browser can see it.

Exam-style question

Name the type of electromagnetic wave used in each of these: (a) a television remote control; (b) killing bacteria on medical instruments; (c) checking luggage at an airport; (d) sending signals to and from satellites. [3]

Saved on this browser only. Anyone using this browser can see it.

Exam-style question

Explain why too much exposure to ultraviolet radiation from the Sun is harmful, and why sunscreen helps. [3]

Saved on this browser only. Anyone using this browser can see it.

Quick recall

Card 1 of 9. Answer in your head, then check.

Which of these lists three regions in order of increasing frequency? (A) Radio waves, infrared, microwaves. (B) Ultraviolet, visible light, infrared. (C) Microwaves, visible light, X-rays.