Lesson 3 of 6
Wave quantities
I can define and use speed, frequency, wavelength, period and amplitude, including graphical representations.Syllabus
Syllabus K223 / K224, 8(c). Define and use speed, frequency, wavelength, period and amplitude, including graphical representations.
Make a guess. You are not marked.
On a rope wave, each crest is 3 cm above the rest line and each trough is 3 cm below it. What is the amplitude of the wave?
Show the answer
3 cm.
Amplitude is the maximum displacement from the rest position. Measure from the rest line to a crest, or from the rest line to a trough.
In short
- Amplitude: the largest displacement from the rest position.
- Wavelength: the distance between neighbouring crests.
- Frequency: the number of waves each second, in Hz. Period = 1 / frequency.
Five quantities describe a wave: amplitude, wavelength, period, frequency and wave speed. Period and frequency are linked by f = 1/T.
Displacement is how far a point is from its rest position, with one direction chosen as positive. For a rope, up is positive and down is negative. It is not the distance the wave has travelled.
Five quantities to know
- Amplitude, A
- The maximum displacement from the rest position. Its unit is a length unit such as m or cm. Measure from the rest line to a crest or to a trough, not from crest to trough.
- Wavelength, λ
- The distance between two neighbouring points at the same stage of the wave, measured in a length unit such as m. Examples are crest to next crest, or trough to next trough. In a longitudinal wave, measure from the centre of one compression to the centre of the next.
- Period, T
- The time taken for one complete oscillation, in seconds. After one period, a point is back at the same stage of its motion.
- Frequency, f
- The number of complete oscillations per second, measured in hertz (Hz). A frequency of 2.5 Hz means 2.5 complete cycles each second.
- Wave speed, v
- The distance the wave pattern travels per unit time, usually in m/s. Follow one feature, such as a crest. This is not the speed of a vibrating point, which keeps changing.
Musicians tune to the note A above middle C. Its frequency is 440 Hz. A string playing this note vibrates 440 times each second.
A complete cycle links period and frequency
A point completes five oscillations in 2.0 s. Its period is 2.0/5 = 0.40 s. Its frequency is 5/2.0 = 2.5 Hz. A longer time for each cycle means fewer cycles each second.
Try it step by step
Work it out in steps: Period T in s, then Frequency f = 1 / T in Hz.
Show the answer
Problem 1.
Period T in s: T = 2.0 / 5 = 0.40 s
Frequency f = 1 / T in Hz: f = 1 / 0.40 = 2.5 Hz
Problem 2.
Period T in s: T = 4.0 / 8 = 0.50 s
Frequency f = 1 / T in Hz: f = 1 / 0.50 = 2.0 Hz
Problem 3.
Period T in s: T = 5.0 / 20 = 0.25 s
Frequency f = 1 / T in Hz: f = 1 / 0.25 = 4.0 Hz
For a longitudinal wave, the distance from a compression centre to the next rarefaction centre is half a wavelength.
Count complete cycles, not crossings. A point passes its rest position twice in each cycle, once in each direction. If you start timing as it passes, stop when it next passes moving the same way.