Lesson 4 of 6
Thermal radiation
I can explain transfer without a material medium and how surface colour and texture, temperature and area affect radiative energy transfer to or from a body.Syllabus
Syllabus K223 / K224, 7(d). Explain transfer without a material medium and how surface colour and texture, temperature and area affect radiative energy transfer to or from a body.
I can apply conduction, convection and radiation to everyday situations and designs.Syllabus
Syllabus K223 / K224, 7(e). Apply conduction, convection and radiation to everyday situations and designs.
In short
- Thermal radiation is mostly infrared. It needs no medium, so it crosses a vacuum.
- Dull black surfaces absorb and emit radiation best. Shiny surfaces reflect it and emit the least.
- A hotter object, or a larger surface area, radiates more energy each second.
Make a guess. You are not marked.
Two identical metal cans are filled with hot water at the same temperature. One is painted dull black and the other is polished and shiny. Which cools faster?
Show the answer
The dull black can, because it emits infrared faster.
A dull black surface is a better emitter of infrared radiation than a shiny one, so it loses energy to the surroundings faster and its water cools sooner.
Energy can transfer by electromagnetic radiation across a vacuum. No material medium is needed between the source and the receiver.
Electromagnetic waves can transfer energy. This route differs from conduction through particles and convection with moving fluid.
Ordinary warm objects emit thermal radiation, mainly infrared at everyday temperatures. They need not glow. Radiation from the Sun reaches Earth through space. This shows that air is not needed to carry it.
Objects emit and absorb
An object can emit radiation and absorb radiation from its surroundings at the same time. Its net energy change depends on the difference between what it receives and what it emits.
A hot object in cooler surroundings usually loses energy overall. At thermal equilibrium with surroundings at the same temperature, emission and absorption balance. There is then no net transfer by radiation, even though both carry on.
Radiation transfers energy across a vacuum
Both bodies emit radiation. The arrows show directions, with no numerical rates implied.
Surface colour and texture
Otherwise identical bodies at the same surface temperature, with the same exposed area and surroundings.
For this usual comparison, dull black is a better emitter. It is also a better absorber of the same incident radiation.
Surface temperature
Same surface finish, exposed area and surroundings; only the surface temperature differs.
A hotter surface emits radiation at a greater rate.
Exposed surface area
Same surface finish, surface temperature and surroundings; the exposed surface area differs.
A larger exposed area gives a greater total rate of emission under these conditions.
Net radiative transfer also depends on what is absorbed from the surroundings. Real cooling can include conduction and convection as well.
Three factors to compare
- Surface colour and texture
- Compare similar opaque surfaces. A dull black surface is a better absorber and a better emitter of thermal radiation than a shiny metallic surface. The shiny surface reflects a greater fraction of the radiation that falls on it. Compare at the same temperature, exposed area and surroundings.
- Surface temperature
- With the same surface finish and area, a hotter surface emits energy at a greater rate. To compare net loss, also keep the surroundings the same. The temperature of an object alone does not tell you how much radiation it receives.
- Surface area
- At the same temperature and with the same finish, a larger exposed surface emits energy at a greater total rate. A larger exposed area also receives more radiation to absorb, if it is lit equally and faces the same way. Use the area actually exposed, not a hidden part of the surface.
More detail (optional)
A comparison should state what is held fixed. If you change both the finish and the temperature, you cannot pick out the effect of finish. A change in the surroundings can alter net transfer even when the surface of the object stays the same.
John Leslie showed the effect of the surface in 1804. He filled a metal cube with hot water, so every face was at the same temperature. The face painted black radiated strongly and the polished face only weakly.
Emission is not the same as net loss. Keep both incoming and outgoing radiation in the explanation. In this comparison a shiny surface is a weaker emitter and absorber. It is not a surface that transfers no energy at all.
Check your understanding
Two opaque metal surfaces have the same exposed area and are both at 80 degrees C in the same cooler surroundings. One is dull black and the other shiny metallic. In the usual thermal-radiation comparison, which emits energy at the greater rate?
Show the answer
The dull black surface.
Under the stated comparable conditions, a dull black surface is a better emitter than a shiny metallic surface. Both still emit and absorb radiation; the surface finish changes the rates.
Next, an investigation compares how a dull black can and a shiny can absorb radiation.