Skip to notes
K324 / 2027
Qualitative Analysis

Lesson 3 of 4

Identify the gas, not just the bubbles

A named gas needs a specific test and observation.

O-Level 6092 (2026) / SEC G3 K324 (2027)

  • I can identify gases.Syllabus

    Syllabus K324, 6(c). Identify gases

Identify the gas, not just the bubbles

Each gas has its own test, so give the test, the result you see and the name of the gas.

Make a guess. You are not marked.

Carbon dioxide is bubbled through limewater, and a white precipitate forms. The gas keeps bubbling through for several minutes. What do you predict?

  1. The precipitate dissolves again, leaving a colourless solution
  2. The precipitate keeps getting thicker, as more calcium carbonate forms
  3. Nothing more happens, as the reaction has already finished
Show the answer

The precipitate dissolves again, leaving a colourless solution

Extra carbon dioxide reacts with the calcium carbonate and water to make a soluble compound, so the precipitate dissolves. That is why you record the first change you see.

Gas tests: your practical paper prints these results, so learn them for the theory papers
GasTestResult
Ammonia, NH3Hold damp red litmus paper in the gasTurns damp red litmus paper blue
Carbon dioxide, CO2Bubble the gas through limewaterWhite precipitate, which dissolves again with excess carbon dioxide
Chlorine, Cl2Hold damp litmus paper in the gasBleaches damp litmus paper (blue litmus turns red first)
Hydrogen, H2Hold a lighted (burning) splint at the mouth of the tubePops with a lighted splint
Oxygen, O2Put a glowing splint into the gasRelights a glowing splint
Sulfur dioxide, SO2Bubble the gas through acidified potassium manganate(VII)Turns acidified potassium manganate(VII) from purple to colourless

A splint is a thin stick of wood. A lighted (burning) splint still has a flame: it tests for hydrogen. A glowing splint has had its flame blown out, so only its tip glows red: it tests for oxygen. Always say which splint you use: examiners list just "a splint" as a common error. A splint going out does not identify any gas, as carbon dioxide, nitrogen and many other gases put out a flame. For carbon dioxide, use limewater.

Litmus paper must be damp, because a gas changes its colour only after dissolving in the water on it. Hold the paper in the gas at the mouth of the tube. Do not let it touch the tube or the liquid: aqueous sodium hydroxide is an alkali and turns red litmus blue by itself. Never identify ammonia by its smell. Examiners gave no credit for that without the damp red litmus result. Chlorine forms acids with water, so damp blue litmus turns red and is then bleached. It never turns blue.

You must know the sulfur dioxide test, but you will not carry it out in a practical exam. Sulfur dioxide is a reducing agent: it reduces the purple manganate(VII) ions, so the solution turns colourless. Other reducing agents do the same, so the result supports sulfur dioxide only where the reaction could make it.

Oxygen makes things burn more strongly, and that is how the glowing splint test works. In August 1774 the English chemist Joseph Priestley heated mercury(II) oxide by focusing sunlight on it. A candle burned more brightly in the gas that came off. The gas was oxygen.

Check your understanding

A glowing splint goes out in a gas. Does that identify hydrogen?

  1. No. Hydrogen is tested with a lighted splint, which gives a pop.
  2. Yes. Hydrogen puts out a glowing splint because it is flammable.
  3. No. It shows the gas is oxygen, which puts out a glowing splint.
Show the answer

No. Hydrogen is tested with a lighted splint, which gives a pop.

Many gases put out a glowing splint, such as CO2 and N2, so this does not identify the gas. The test for hydrogen is a squeaky pop with a lighted splint.

Check your understanding

A solution is warmed with aqueous sodium hydroxide to test for ammonium ions. Where should the damp red litmus paper be held?

  1. At the mouth of the tube, but dry, so water cannot dilute the gas
  2. At the mouth of the tube, in the gas, without touching the tube
  3. Dipped into the warm mixture, since that is where the ammonia forms
Show the answer

At the mouth of the tube, in the gas, without touching the tube

Ammonia is a gas, so test the gas. The mixture contains sodium hydroxide, an alkali that turns red litmus blue by itself. So the paper must not touch the liquid or the wet glass.

Watch out for this

A student says: "Test for oxygen: hold a lighted splint in the gas. The splint relights." What is wrong with this?

Show the answer

A lighted splint is still burning, so it cannot relight. Use a glowing splint: light it, blow out the flame so only the tip glows, then put it into the gas. Oxygen relights it. A lighted (burning) splint is the hydrogen test, where the gas pops. Examiners report a significant number of answers saying that oxygen relights a burning splint.