Skip to notes
K223 / K225 / 2027
Acid-Base Chemistry

Full chapter

Acid-Base Chemistry

Use ions and reaction patterns to explain acids, bases and salts.

SEC G2 Science K223 / K225 (2027)

01

Acids, alkalis and pH

Acids make hydrogen ions in water, alkalis make hydroxide ions, and the pH shows which ion there is more of.

Make a guess. You are not marked.

Hydrochloric acid of pH 1 is diluted ten times with water. What is the pH now?

  1. Exactly pH 7, because water is neutral
  2. Still pH 1, as the acid is the same
  3. Higher than 1 but still below 7
Show the answer

Higher than 1 but still below 7

There are fewer hydrogen ions in each cm3, so the solution is less acidic. Adding water never makes an acid neutral or alkaline.

An acid is a substance that produces hydrogen ions, H+, when it dissolves in water. A base is a substance that neutralises an acid. An alkali is a base that dissolves in water and produces hydroxide ions, OH-. So every alkali is a base, but not every base is an alkali. Copper(II) oxide is a base, but it does not dissolve in water. Every solution in water contains some H+ and some OH- ions. What matters is which there is more of.

Universal Indicator and the pH scale
Solution at room temperatureRelative ionspH and typical indicator colour
AcidicMore H+ than OH-Below 7; red through orange/yellow as pH increases
NeutralEqual H+ and OH-7; green
AlkalineMore OH- than H+Above 7; blue through purple

Universal Indicator changes colour across the whole pH scale. Compare the colour with the chart supplied to estimate the pH. A pH meter gives a more exact reading, as a number. The lower the pH, the more acidic the solution; the higher the pH, the more alkaline it is. You do not need to calculate pH.

Soil pH matters because it controls which nutrients plant roots can take up. In Singapore, NParks gives pH 5.5 to 7.5 as the suitable range for general plant growth. When soil is too acidic, growers add calcium hydroxide, also called slaked lime. It is a base, so it neutralises the excess acid and the pH rises. Too much would make the soil alkaline, so test the pH first and add only what is needed.

Check your understanding

Does a neutral solution contain no H+ ions?

  1. It has no H+ ions, because H+ ions are what make a solution acidic.
  2. It has H+ ions, balanced by an equal concentration of OH- ions.
  3. It has H+ ions if a little acid was added to it beforehand, and none otherwise.
Show the answer

It has H+ ions, balanced by an equal concentration of OH- ions.

Water itself ionises slightly, so any aqueous solution has some H+ and OH-. Neutral means the two concentrations are equal, not that the ions are absent.

Check your understanding

Copper(II) oxide neutralises dilute sulfuric acid, but it does not dissolve in water. How should it be described?

  1. A base but not an alkali, since it does not dissolve in water
  2. An alkali, since anything that neutralises an acid is an alkali
  3. Not a base, since a base must dissolve in water to react
Show the answer

A base but not an alkali, since it does not dissolve in water

A base neutralises an acid. An alkali is a base that dissolves in water to give OH- ions, and copper(II) oxide does not dissolve.

Watch out for this

A student says: "Calcium hydroxide is added to acidic soil to lower its pH." What is wrong with this?

Show the answer

Calcium hydroxide is a base. It neutralises the acid in the soil, so the soil becomes less acidic and its pH rises towards 7. Examiners report answers that say liming lowers the pH or raises the acidity.

02

Recognise the reaction pattern

Acids react with metals, bases and carbonates to make salts, and the acid decides which salt forms.

Make a guess. You are not marked.

An antacid tablet contains calcium carbonate. It is dropped into dilute hydrochloric acid, the acid found in the stomach. What will you see?

  1. A white precipitate, as calcium chloride forms
  2. Fizzing, as carbon dioxide gas is given off
  3. No change, as a carbonate cannot neutralise an acid
Show the answer

Fizzing, as carbon dioxide gas is given off

An acid and a carbonate give a salt, water and carbon dioxide. Here the salt is calcium chloride, which stays dissolved, and the gas bubbles out.

Acid and base reactions
ReactantsProductsBalanced example
Acid + suitable metalSalt + hydrogenMg(s) + 2HCl(aq) -> MgCl2(aq) + H2(g)
Acid + baseSalt + waterCuO(s) + H2SO4(aq) -> CuSO4(aq) + H2O(l)
Acid + carbonateSalt + water + carbon dioxideCaCO3(s) + 2HCl(aq) -> CaCl2(aq) + H2O(l) + CO2(g)
Alkali + ammonium salt (faster when warmed)Salt + water + ammoniaNH4Cl(aq) + NaOH(aq) -> NaCl(aq) + H2O(l) + NH3(g)

The acid gives the salt the second part of its name: hydrochloric acid makes chlorides, sulfuric acid makes sulfates and nitric acid makes nitrates. The metal or base gives the first part. Not every metal reacts with a dilute acid. Copper, for example, gives no hydrogen with dilute hydrochloric acid.

When an acid reacts with an alkali, the reacting ions are H+(aq) + OH-(aq) → H2O(l). This is neutralisation. The other dissolved ions are spectator ions: they stay in solution, unchanged. An alkali also reacts with an ammonium salt and gives off ammonia gas: NH4+(aq) + OH-(aq) → NH3(g) + H2O(l). This happens without heating. Warming makes the ammonia escape faster, which is why the laboratory test warms the mixture.

Worked examplePredict and confirm the gas

Dilute acid is added to a carbonate and bubbles appear. How should the result be described?

Try it first. Then show the worked stepsHide the worked steps
  1. Predict carbon dioxide from the carbonate reaction pattern.
  2. Report effervescence as the observation.
  3. Pass the gas into limewater: a white precipitate supports carbon dioxide.
Answer

Effervescence alone does not identify a gas. Carbon dioxide turns limewater milky; hydrogen instead gives a pop with a lighted splint.

Chemists have known this reaction for a long time. In the 1750s, the Scottish chemist Joseph Black found that a carbonate gives off a gas when acid is added. He called it fixed air. Today we call it carbon dioxide.

Check your understanding

What salt forms when zinc reacts with dilute sulfuric acid?

  1. Zinc sulfite, ZnSO3, with oxygen gas given off
  2. Zinc sulfide, ZnS, with water as the other product
  3. Zinc sulfate, ZnSO4, with hydrogen gas given off
Show the answer

Zinc sulfate, ZnSO4, with hydrogen gas given off

Metal + acid -> salt + hydrogen. The salt takes its first name from the metal and its second from the acid: Zn(s) + H2SO4(aq) -> ZnSO4(aq) + H2(g).

Check your understanding

A gardener adds ammonium sulfate fertiliser and calcium hydroxide to the same soil at the same time. Why is this a poor idea?

  1. The calcium hydroxide makes the fertiliser insoluble, so roots cannot take it in
  2. The calcium hydroxide reacts with the ammonium salt and gives off ammonia gas
  3. They only neutralise each other to give a harmless salt and water
Show the answer

The calcium hydroxide reacts with the ammonium salt and gives off ammonia gas

A base and an ammonium salt react to give a salt, water and ammonia. The nitrogen escapes as ammonia gas, so less is left to feed the plants.

Watch out for this

A student says: "The ionic equation for the neutralisation of hydrochloric acid by sodium hydroxide is HCl + NaOH -> NaCl + H2O." What is wrong with this?

Show the answer

That is the full equation. In the ionic equation, the spectator ions Na+ and Cl- are left out, and every ion shows its charge: H+(aq) + OH-(aq) -> H2O(l). Examiners report ionic equations with missing charges, full or part-ionic equations, and unbalanced ones.

Exam-style question

Describe an acid reaction and the treatment of acidic soil. [5]

Limestone is mainly calcium carbonate, CaCO3.
(a) Dilute hydrochloric acid is added to calcium carbonate. Name the salt formed, and write a balanced equation, with state symbols, for the reaction. [3]
(b) A farmer's soil has a pH of 4.5. Explain how adding calcium hydroxide helps the crops, and why the farmer should not add too much. [2]

Saved on this browser only. Anyone using this browser can see it.

03

Classify an oxide by its reactions

Most metal oxides are basic and most non-metal oxides are acidic, but test the reactions, as some oxides are amphoteric or neutral.

Four oxide classes
ClassBehaviourExamples
BasicReacts with acids to form salt and waterCuO, MgO: generally metal oxides
AcidicReacts with bases to form salt and waterCO2, SO2: generally non-metal oxides
AmphotericReacts with both acids and strong alkalisAl2O3, ZnO
NeutralDoes not show typical acidic or basic oxide reactionsCO, NO, H2O; being a non-metal oxide does not guarantee acidity

Classify an oxide by what it reacts with. Carbon dioxide is acidic: it reacts with an alkali such as sodium hydroxide, CO2(g) + 2NaOH(aq) → Na2CO3(aq) + H2O(l). Copper(II) oxide is basic: it reacts with acids. Whether an oxide dissolves in water does not decide its class. Copper(II) oxide is insoluble, but it is still a basic oxide.

Spacecraft use this reaction. On Apollo 13 in April 1970, canisters of lithium hydroxide, an alkali, absorbed the carbon dioxide the astronauts breathed out.

Check your understanding

An oxide reacts with hydrochloric acid and also with aqueous sodium hydroxide. How is it classified?

  1. Amphoteric, as it reacts with acids and bases
  2. Neutral, because its acidic and basic sides cancel out
  3. Basic, because it reacts with hydrochloric acid
Show the answer

Amphoteric, as it reacts with acids and bases

A basic oxide reacts with acids only, and an acidic oxide with bases only. Reacting with both is the evidence for an amphoteric oxide, such as zinc oxide or aluminium oxide.

Sort these

Sort the oxides by how they behave with acids and alkalis.

Show the answer

Acidic: SO2 / CO2

Basic: CaO / CuO

Amphoteric: ZnO / Al2O3

Neutral: NO / CO

Watch out for this

A student says: "Sulfur dioxide dissolves in water, so its solution must be alkaline." What is wrong with this?

Show the answer

Sulfur is a non-metal, and most non-metal oxides are acidic. Sulfur dioxide dissolves to give an acidic solution, so Universal Indicator turns red, orange or yellow, not green or purple. The exceptions are CO, NO and H2O, which are neutral. Dissolving does not decide the class of an oxide. Examiners report answers that call a non-metal oxide alkaline and give colours from purple to green.

Quick revision

Revisit the essentials, then return to an explanation when you need it.

Exam definitions: learn these in mark-scheme words
TermDefinition to write
AcidA substance that produces hydrogen ions, H+(aq), when dissolved in water.
AlkaliA soluble base that produces hydroxide ions, OH-(aq), when dissolved in water.
BaseA substance that reacts with an acid to form a salt and water only. Most bases are metal oxides or hydroxides.
NeutralisationThe reaction between hydrogen ions and hydroxide ions to form water: H+(aq) + OH-(aq) → H2O(l).
SaltThe compound formed when the hydrogen ions of an acid are replaced by metal ions or ammonium ions.

Acids supply H+; alkalis supply OH-. Acid + base gives salt and water; carbonate also gives CO2; suitable metal gives H2. Alkali and ammonium salt release NH3 on warming.

Scope

Learning outcomes

5. Acid-Base Chemistry (K223 / K225). Use the outcome map to find the explanation for a particular syllabus requirement.

See the learning outcome map
  1. 5(a) Define acids and alkalis

    • Aqueous H+ and OH-
    • Universal Indicator

    Acids, alkalis and pH

  2. 5(b) Compare acidity and alkalinity

    • Relative ion concentrations
    • Indicator colours
    • pH scale, no logarithmic calculation

    Acids, alkalis and pH

  3. 5(c) Describe acid reaction patterns

    • Metals, bases and carbonates
    • Salt products

    Recognise the reaction pattern

  4. 5(d) Explain neutralisation

    • H+ + OH- -> water

    Recognise the reaction pattern

  5. 5(e) Explain control of soil acidity

    • Importance of soil pH
    • Calcium hydroxide treatment

    Acids, alkalis and pH

  6. 5(f) Describe base reactions

    • With acids
    • With ammonium salts on warming

    Recognise the reaction pattern

  7. 5(g) Classify oxides

    • Acidic, basic, amphoteric, neutral
    • Metal/non-metal character and exceptions

    Classify an oxide by its reactions