Lesson 6 of 6
Solutions and titrations
Use n = cV, the equation's ratio and the scale-up to the whole solution.
A-Level 8873, revised syllabus (2026-2027)
I can calculate reacting quantities.Syllabus
Syllabus 8873, 5(i). Calculate reacting quantities.
I can infer stoichiometric relationships.Syllabus
Syllabus 8873, 5(j). Infer stoichiometric relationships.
Make dilution and titration steps explicit
Use n = cV, then the equation's ratio, then scale from the portion titrated to the whole solution.
For a solution, n = cV with concentration in mol dm-3 and volume in dm3. Divide a volume in cm3 by 1000 first. Dilution changes concentration and volume but not the solute amount: c1V1 = c2V2 when no reaction or loss occurs.
Check your understanding
25.0 cm3 of 0.200 mol dm-3 NaOH is diluted with water to 100.0 cm3. What is the new concentration?
Show the answer
0.0500 mol dm-3, as the 0.00500 mol is now in 0.100 dm3
Dilution keeps the amount: 0.200 x 0.0250 = 0.00500 mol. Then c = 0.00500 / 0.100 = 0.0500 mol dm-3.
Worked exampleA redox titration binds volume to a 1:5 ratio
25.0 cm3 Fe2+ solution requires 14.60 cm3 of 0.0200 mol dm-3 acidified MnO4-. Find the Fe2+ concentration.
Try it first. Then show the worked stepsHide the worked steps
- Permanganate amount = 0.0200 × 0.01460 = 2.92 × 10-4 mol.
- The balanced acidic equation requires five Fe2+ per MnO4-, so Fe2+ amount = 1.46 × 10-3 mol.
- That amount is in 0.0250 dm3. Concentration = 1.46 × 10-3 / 0.0250.
[Fe2+] = 0.0584 mol dm-3. The answer has three significant figures, matching the limiting input precision.
Try it step by step
Work it out in steps: Moles of MnO4-, then Moles of Fe2+ (5 per MnO4-), then Concentration of Fe2+.
Show the answer
Problem 1.
Moles of MnO4-: n(MnO4-) = 0.0200 x 0.02000 = 0.000400 mol.
Moles of Fe2+ (5 per MnO4-): n(Fe2+) = 5 x 0.000400 = 0.00200 mol.
Concentration of Fe2+: [Fe2+] = 0.00200 / 0.0250 = 0.0800 mol dm-3.
Problem 2.
Moles of MnO4-: n(MnO4-) = 0.0100 x 0.01640 = 0.000164 mol.
Moles of Fe2+ (5 per MnO4-): n(Fe2+) = 5 x 0.000164 = 0.000820 mol.
Concentration of Fe2+: [Fe2+] = 0.000820 / 0.0250 = 0.0328 mol dm-3.
Problem 3.
Moles of MnO4-: n(MnO4-) = 0.0200 x 0.01250 = 0.000250 mol.
Moles of Fe2+ (5 per MnO4-): n(Fe2+) = 5 x 0.000250 = 0.00125 mol.
Concentration of Fe2+: [Fe2+] = 0.00125 / 0.0200 = 0.0625 mol dm-3.
Fe2+ solutions slowly oxidise in air, so analysts often use Mohr's salt, ammonium iron(II) sulfate, named after the German chemist Karl Friedrich Mohr. Its crystals resist oxidation by air, so it is a reliable source of Fe2+ for these titrations.
Worked exampleDeduce a stoichiometric ratio from experiment
0.0100 mol of an unknown acid reacts exactly with 0.0200 mol NaOH. What does the evidence suggest?
Try it first. Then show the worked stepsHide the worked steps
- NaOH supplies one OH- per formula unit.
- Two moles of OH- react per mole of the acid.
- Under the stated complete neutralisation conditions, this is consistent with two replaceable protons per acid molecule.
The acid is dibasic in this neutralisation. The evidence gives a 1:2 ratio, not the acid's full molecular identity.
Use raw burette readings to obtain the delivered volume. The first, rough titration only finds the approximate end point, so it is not used in the mean. Then use concordant titres, accurate titres that agree closely, rather than an isolated overshoot. Record measured precision, retain guard digits during calculation, then round the final result appropriately. Units such as mol, mol dm-3, g and cm3 communicate different quantities; a correct number with the wrong unit is not a correct result.
Watch out for this
A student says: "To find the mean titre, average every titre you recorded, including the rough one." What is wrong with this?
Show the answer
Average only accurate titres that agree closely, usually within 0.10 cm3. The rough titre overshoots, so it would distort the mean. A June 2021 Cambridge report says some candidates included the rough titre, or a titre outside the concordant set, in their average.
Exam-style question
Find the mass of iron in a tablet by titration. [4]
MnO4- + 8H+ + 5Fe2+ → Mn2+ + 4H2O + 5Fe3+
(a) Calculate the amount of MnO4- used. [1]
(b) Find the amount of Fe2+ in the 25.0 cm3 portion. [1]
(c) Find the amount of Fe2+ in the whole tablet. [1]
(d) Calculate the mass of iron in the tablet, in mg. Use Ar(Fe) = 55.8. [1]
Saved on this browser only. Anyone using this browser can see it.