9478 / 2027
Wave Motion overview

Lesson 3 of 8

Phase difference along a wave

  • I can use displacement, amplitude, period, frequency, phase, phase difference, wavelength and wave speed.Syllabus

    Syllabus 9478, 10(b). Use displacement, amplitude, period, frequency, phase, phase difference, wavelength and wave speed.

  • I can interpret transverse and longitudinal wave graphs against both time and equilibrium position.Syllabus

    Syllabus 9478, 10(e). Interpret transverse and longitudinal wave graphs against both time and equilibrium position.

Make a guess. You are not marked.

Two points on a progressive wave are a quarter of a wavelength apart along the direction of travel. What is their phase difference?

  1. pi/4 rad, because a quarter wavelength is a quarter of pi.
  2. pi/2 rad, a quarter of a full cycle.
  3. pi rad, because the points are on opposite sides of equilibrium.
Show the answer

pi/2 rad, a quarter of a full cycle.

One wavelength corresponds to a phase difference of 2 pi rad. A quarter of a wavelength corresponds to 2 pi / 4 = pi/2 rad.

Two points on a wave are out of step by a fraction of a cycle. That fraction, times 2π, is their phase difference.

Use the distance between the two points, or the time between them reaching the same stage:

Δφ = 2πΔx/λ
Δφ = 2πΔt/T

One whole wavelength, or one whole period, is 2π rad, which puts the points back in phase. In degrees, use 360° in place of 2π.

Worked example

Two points 0.20 m apart

Use the same wave: λ = 0.80 m and T = 0.20 s, moving right.

Δφ = 2π × 0.20/0.80 = π/2 rad
Time delay = T/4 = 0.050 s

For a wave moving right, the point further right lags

Solid blue: x = 0. Dashed brown: x = 0.20 m. The filled markers show matching peaks at 0.150 s and 0.200 s.

A point 0.20 metres further on reaches the same state 0.050 seconds laterTwo time traces with amplitude 4 millimetres and period 0.20 seconds, for x = 0 and x = 0.20 metres. The second trace is the first shifted 0.050 seconds later.0.000.050.100.150.20-40+40.050 sDisplacement y / mmElapsed time t / s

The point further right reaches the same state 0.050 s later, a phase difference of π/2 rad. The direction of travel tells you which point lags.

Time graphs for x = 0 and x = 0.20 m. The second reaches each stage 0.050 s after the first.

The wave moves right, so the point at 0.20 m reaches each stage later. It lags the point at x = 0 by 0.050 s, which is π/2 rad. A time and a phase are different quantities with different units.

Check your understanding

A space snapshot has successive crests 0.80 m apart. A fixed-point time trace repeats after 0.20 s. For this right-moving wave, how does a point 0.20 m downstream compare with the first point?

  1. 0.80 m, 0.20 s, and the downstream point lags by 0.050 s (pi/2 rad).
  2. Wavelength is 0.80 m and period is 0.20 s, but the downstream point leads by 0.050 s.
  3. Wavelength is 0.20 m, period is 0.80 s, and the two points are in phase.
Show the answer

0.80 m, 0.20 s, and the downstream point lags by 0.050 s (pi/2 rad).

The separation is one quarter of a wavelength, so the same travelling state arrives one quarter-period later: 0.20/4 = 0.050 s. That time delay corresponds to a phase difference of pi/2 rad.

Points half a wavelength apart are π rad apart, in antiphase: one is at a crest when the other is at a trough. Points a whole wavelength apart are in phase.

Equal displacement at one instant does not mean equal phase. The two points may be moving in opposite directions.