9478 / 2027
Wave Motion overview

Lesson 8 of 8

Malus' law

  • I can use Malus' law and field projection to calculate transmitted intensity and amplitude of plane-polarised electromagnetic waves.Syllabus

    Syllabus 9478, 10(j). Use Malus' law and field projection to calculate transmitted intensity and amplitude of plane-polarised electromagnetic waves.

Make a guess. You are not marked.

Plane-polarised light meets a polarising filter whose axis is at 60 degrees to its polarisation. What fraction of the intensity gets through?

  1. A third, because 60 degrees is two thirds of the way to 90 degrees.
  2. Half, because cos 60 degrees is 0.5.
  3. A quarter, because cos 60 = 0.5 and intensity goes as cos squared.
Show the answer

A quarter, because cos 60 = 0.5 and intensity goes as cos squared.

The amplitude passed is E0 cos 60 = 0.5 E0. Intensity goes as amplitude squared, so I = I0 cos2 60 = 0.25 I0.

A filter passes the part of the electric field that lies along its axis. So the intensity that gets through is I = I0 cos2θ.

From amplitude to intensity

Plane-polarised light with electric-field amplitude E0 meets a filter. Let θ be the angle between the light's polarisation and the filter's axis. The filter passes the component along its axis:

E = E0 cos θ

Intensity goes as amplitude squared, so this gives Malus' law:

I = I0 cos2θ

I0 is the intensity arriving at this filter. θ is measured between two directions at right angles to the beam, not between the beam and the filter.

Worked example

Amplitude and intensity change by different factors

Plane-polarised light of 80 W/m2 meets a filter at θ = 30°:

E/E0 = cos 30° = 0.866
I = 80 cos230° = 80 × 0.75 = 60 W/m2

The filter passes the part of the field along its axis

You are looking along the direction of travel. The incoming electric field is vertical. The brown dashed line is the filter axis, at 30° to it.

A 30-degree filter passes 0.866 of the field amplitudeLooking along the beam: a vertical arrow for the incoming field, a dashed filter axis at 30 degrees, and a shorter arrow along that axis for the field that gets through, 0.866 as long.Electric-field amplitudesE030°OFilter axisEoutEout = E0 cos 30°= 0.8660 E0

From 80 W/m2 of plane-polarised light, I = 80 cos230° = 60 W/m2. The light that gets through is polarised along the filter axis.

Looking along the beam: the incoming field, the filter axis at 30°, and the shorter field that gets through.
One filter at different angles, for 80 W/m2 of plane-polarised light
Angle / °Amplitude ratioIntensity / (W/m2)
300.86660
600.50020
9000

At 60° the amplitude halves, but the intensity falls to a quarter, 20 W/m2. At 90° nothing gets through.

Two filters in a row

Start again with 80 W/m2 of plane-polarised light. Filter 1 is at 45° to it, and filter 2 is at 90° to the original direction. The light leaving filter 1 is polarised at 45°, so filter 2 is only 45° from the light it receives.

Use the light arriving at each filter

Read from top to bottom. Filter angles are measured from the starting vertical direction. In each view a thin grey dashed line shows the light arriving at that filter.

Two 45-degree steps leave a quarter of the intensityThree views looking along the beam: the vertical input, the output of filter 1 at 45 degrees, and the output of filter 2 at 90 degrees to the start. Each step passes 0.707 of the amplitude, so the final amplitude is half and the intensity a quarter.Plane-polarised inputAmplitude E080 W/m2Original: 0°Filter 1: 45 degrees to the start45°E1 = 0.7071 E040 W/m2Filter 2: 90 degrees to the start45°E2 = 0.5000 E020 W/m2

The intensity goes 80 → 40 → 20 W/m2. Filter 2 alone, at 90° to the input, would pass nothing. Filter 1 turns the polarisation, so filter 2 is only 45° from the light it receives.

Each view shows the light arriving at a filter and the filter's axis. Both steps are 45°.
I1 = 80 cos245° = 40 W/m2
I2 = 40 cos245° = 20 W/m2

Filter 2 on its own, at 90° to the light, would pass nothing. Putting filter 1 in front turns the polarisation, so some light gets through both.

Check your understanding

Plane-polarised light of intensity 80 W/m2 passes through ideal filter axes at 45 degrees and then 90 degrees to its original polarisation. What intensity emerges from the second filter?

  1. 40 W/m2, because the first filter alone changes the intensity.
  2. 20 W/m2, because each filter in turn passes the 45-degree projection of the light arriving at it.
  3. 0 W/m2, because the final axis is at 90 degrees to the original polarisation direction.
Show the answer

20 W/m2, because each filter in turn passes the 45-degree projection of the light arriving at it.

The first transmits 80 cos2 45 = 40 W/m2 and polarises it along its axis. The second transmits 40 cos2 45 = 20 W/m2.

Apply Malus' law to plane-polarised light only. For unpolarised light, the first filter passes half; use Malus' law from there on.