9478 / 2027
Circular Motion overview

Lesson 6 of 7

Forces at an angle

  • I can recall and use F = mr omega^2 and F = mv^2/r for the inward resultant.Syllabus

    Syllabus 9478, 7(f). Recall and use F = mr omega^2 and F = mv^2/r for the inward resultant.

Make a guess. You are not marked.

A conical pendulum bob is made to go round faster on the same string. What happens to the string?

  1. It moves closer to the vertical.
  2. The angle stays the same, and only the tension increases.
  3. It swings further from the vertical, and its tension increases.
Show the answer

It swings further from the vertical, and its tension increases.

Going faster needs a larger inward force, so the string tilts more. Since S cos theta = mg, a larger angle needs a larger tension S.

When a force acts at an angle, resolve it. Its vertical part balances the weight, and its horizontal part supplies the inward resultant.

Worked conical pendulum

Only part of the tension points inward

A 0.200 kg bob hangs on a light 1.00 m string. It moves round a level circle of radius 0.600 m, 0.800 m below the pivot. Air resistance is negligible. Use g = 10.0 N/kg.

Let θ be the string's angle to the vertical. Then sin θ = 0.600/1.00 and cos θ = 0.800/1.00, so θ = 36.87°. Call the tension S, because T is the period.

The circle's radius is not the string length

A 0.200 kg bob on a 1.00 m string; g = 10.0 N/kg. S is the tension, and T is the period.

Side view: a 0.600 / 0.800 / 1.00 m triangle

The angle is measured from the vertical at the pivotSide view. The pivot is 0.800 m above the centre of the circle, the bob is 0.600 m out, and the 1.00 m string is at 36.87 degrees to the vertical.Fixed pivotθO0.800 mString1.00 mr = 0.600 m0.200 kgθ = 36.9° from the vertical

Two real forces; tension is resolved into components

Purple arrows are the two real forces. Dashed brown arrows are parts of the same tension, not extra forces.

Only the horizontal component of tension supplies the inward resultantTension 2.50 N along the string and weight 2.00 N down. The tension's parts are 2.00 N up and 1.50 N towards the centre.θS = 2.50 NS cos θ2.00 NS sin θ1.50 N inwardWeight2.00 N

The inward resultant is 1.50 N. With r = 0.600 m, the speed is 2.12 m/s.

The real forces are the tension along the string and the weight. The two parts of the tension explain the resultant; they are not extra forces.

The bob stays at the same height, so the vertical part of the tension balances the weight:

S cos θ = mg
0.800S = 0.200 × 10.0 = 2.00 N
S = 2.50 N

The horizontal part points to the centre of the circle:

S sin θ = 2.50 × 0.600 = 1.50 N
1.50 = mv2/r

Use the radius of the circle, 0.600 m, not the string length:

v = √(1.50 × 0.600/0.200) = √4.50
= 2.12 m/s
ω = v/r = 3.54 rad/s
T = 2π/ω = 1.78 s

The tension is 2.50 N, but the inward resultant is only 1.50 N. Keep extra digits until the last step.

The same idea elsewhere

A marble rolling round inside a smooth bowl works the same way. The bowl's push is at an angle. Its vertical part balances the weight, and its horizontal part supplies the inward force.

A real example. NASA's Glenn Research Center explains how an aircraft turns. The pilot rolls the plane, so the lift tilts in the direction of the roll. One part of the lift is vertical and opposes the weight. The sideways part turns the aircraft, and its path is a circular arc.

Do not use the string length as the radius, or the whole tension as the inward force. Here r = 0.600 m, not 1.00 m, and the inward force is 1.50 N, not 2.50 N.

Check your understanding

A 0.200 kg conical-pendulum bob moves in a horizontal circle. Its tension is 2.50 N at 36.87 degrees to the vertical; take g = 10.0 N/kg. What supplies the inward resultant?

  1. The whole 2.50 N tension along the string.
  2. The 1.50 N horizontal component of tension.
  3. The 2.00 N weight.
Show the answer

The 1.50 N horizontal component of tension.

2.50 sin(36.87 degrees) = 1.50 N is inward. The 2.00 N vertical component balances the 2.00 N weight, leaving no vertical acceleration.