Lesson 4 of 10
Curved graphs and changing acceleration
I can use position or displacement gradients, and velocity gradients and areas, including non-uniform acceleration.Syllabus
Syllabus 8867, 3(c). Use position or displacement gradients, and velocity gradients and areas, including non-uniform acceleration.
Make a guess. You are not marked.
Trapezium strips are used to estimate the area under a velocity-time graph that curves upwards, getting steeper. How does the estimate compare with the true area?
Show the answer
Slightly too big: each straight top sits above the curve
On a curve that gets steeper, the straight line joining two points lies above the curve between them. So each strip includes a little extra area.
A curved velocity-time graph means the acceleration is changing. Use a tangent for the acceleration at one instant, and strips to estimate the area.
Take a smooth model from 0 to 4 s. With t in seconds, the velocity in m/s is v = 1 + 0.5t2.
| Time / s | Velocity / m s-1 |
|---|---|
| 0 | 1.0 |
| 1 | 1.5 |
| 2 | 3.0 |
| 3 | 5.5 |
| 4 | 9.0 |
A curved velocity graph needs a local gradient and an area estimate
The supplied model is v = 1 + 0.5t2, with t in seconds and v in m/s. These are calculated model values.
A true tangent at 3 s
A = (2 s, 2.5 m/s) and B = (4 s, 8.5 m/s) are on the tangent. Its gradient is (8.5 - 2.5)/(4 - 2) = 3.0 m/s2. The actual curve readings at 2 s and 4 s are 3.0 and 9.0 m/s.
The whole-interval average acceleration is (9.0 - 1.0)/4.0 = 2.0 m/s2. It answers a different question from the local tangent.
Four 1 s trapezia approximate the displacement
Estimated area = 1.25 + 2.25 + 4.25 + 7.25 = 15.0 m. The trapezium tops sit above the curve. Using 0.5 s strips gives a closer estimate of 14.75 m.
The endpoint shortcut (u + v)t/2 would give 20 m. It assumes a straight velocity graph and does not apply to this curve.
Acceleration at an instant and on average
Take the points from the tangent
The tangent at t = 3 s passes through (2 s, 2.5 m/s) and (4 s, 8.5 m/s). Its gradient is (8.5 - 2.5)/(4 - 2) = 3.0 m/s2.
The average acceleration over the whole 4 s is (9.0 - 1.0)/4.0 = 2.0 m/s2. That does not describe every instant.
Check your understanding
A tangent to a curved velocity-time graph at t = 3 s passes through (2 s, 2.5 m/s) and (4 s, 8.5 m/s). What does its gradient give?
Show the answer
Instantaneous acceleration at 3 s: 3.0 m/s2.
The tangent gradient is (8.5 - 2.5)/(4 - 2) = 3.0 m/s2. The two supplied points are on the tangent; they need not be observations on the curve.
Trap the area, then estimate it
Velocity rises all the way. Four 1 s rectangles using the left-hand heights sit under the curve; using the right-hand heights they sit above it:
Lower sum = (1.0 + 1.5 + 3.0 + 5.5) × 1 = 11 m
Upper sum = (1.5 + 3.0 + 5.5 + 9.0) × 1 = 19 m
So 11 m < displacement < 19 m
A trapezium strip has area = mean of its two end velocities × its width. Four 1 s strips give 1.25 + 2.25 + 4.25 + 7.25 = 15.0 m. Half-second strips give 14.75 m. Narrower strips follow the curve more closely.
(u + v)t/2 = (1 + 9)(4)/2 = 20 m is wrong here. That formula needs a straight velocity-time line. It even goes past the 19 m upper limit.
A real example. On 14 October 2012, Felix Baumgartner jumped from about 39 km up. Less than a minute into his fall he reached 1357.6 km/h, faster than sound. Then the thicker air lower down slowed him. His velocity-time graph curved up, flattened at its peak, where the tangent was level, and then fell.