K323 / 2027
Static electricity overview

Lesson 4 of 8

Two induction experiments

  • I can describe experiments showing charging by induction.Syllabus

    Syllabus K323, 13(g). Describe experiments showing charging by induction.

Make a guess. You are not marked.

A negative rod is held near the cap of an uncharged electroscope, and the leaf rises. The cap is then touched with a finger while the rod stays in place. What happens to the leaf?

  1. It falls, because electrons flow from the electroscope to Earth through the finger.
  2. It stays up, because the rod is still near and still repels electrons.
  3. It rises higher, because the finger adds more charge to the cap.
Show the answer

It falls, because electrons flow from the electroscope to Earth through the finger.

The rod repels electrons down to the stem and leaf. The finger gives them a path to Earth, so they leave. The stem and leaf are no longer charged, so the leaf falls.

Two experiments show charging by induction. In both, you cut off the electrons' path before you take the rod away.

Charging by induction gives the steps: bring the rod near, connect Earth, disconnect Earth, remove the rod.

See the steps with a gold-leaf electroscope

A gold-leaf electroscope has a metal cap joined to a metal stem and a thin gold leaf. When the leaf and the stem have the same kind of charge, they repel, and the leaf rises away from the stem. An insulating support stops charge leaking away. Abraham Bennet developed the instrument in 1787.

Start with an uncharged electroscope and a negative rod. Bring the rod near the cap without touching. Electrons move away from the cap to the stem and leaf, and the leaf rises. Hold the rod in place and connect the cap to Earth for a moment. Electrons leave and the leaf falls.

Disconnect Earth while the rod is still close. Then remove the rod. The positive charge that is left spreads to the stem and leaf, and the leaf rises again. A leaf that stays up after the rod has gone shows that charge remains. A raised leaf does not show the sign. The electron count tells you that it is positive here.

The final result for three orders of steps (reset the electroscope between trials)
Order of stepsWhat you see at the end, and why
Disconnect Earth, then remove the rodThe leaf stays up. The electroscope was cut off with too few electrons, so it keeps a positive charge.
Remove the rod, then disconnect EarthThe leaf ends down. Electrons could flow back while Earth was still connected, so the electroscope is neutral.
Bring the rod near and take it away, with no Earth connectionThe leaf rises for a while and then falls. Electrons moved inside the electroscope while the rod was near, but none entered or left.

Discharge the electroscope before each new trial. Keep the rod's sign and position the same. Do not touch the rod to the cap. The leaf angle is not a measurement in coulombs, and leakage can change what you see.

Induction without an Earth connection

Two neutral metal spheres, A and B, touch each other on insulating stands. Hold the negative rod close to A. Electrons are pushed from A into B through the point where they touch. A becomes positive and B becomes negative. The pair is still neutral overall.

Induction can also separate charge without Earth

A and B start neutral. The large signs label each sphere's net charge, not individual particles or a detailed surface distribution. Assume no charge escapes.

1. Keep the spheres touching; bring the rod close

1. Keep the spheres touching; bring the rod closeTwo initially neutral conducting spheres A and B touch on insulating supports. A negative rod is brought near A without contact. Electrons move through the contact from A to B. A develops a net positive charge and B a net negative charge, while the combined charge remains zero.---NegativerodNo contactAB+-Electrons: A to BCombined net charge: zero

Two initially neutral conducting spheres A and B touch on insulating supports. A negative rod is brought near A without contact. Electrons move through the contact from A to B. A develops a net positive charge and B a net negative charge, while the combined charge remains zero.

2. Separate A and B with the rod still close

2. Separate A and B with the rod still closeThe spheres are moved apart while the negative rod is kept near A. There is now an insulating gap between them, so electrons cannot move back through the former contact. A remains positive and B negative. Neither sphere is earthed.---NegativerodNo contactAB+-GapCombined net charge: zero

The spheres are moved apart while the negative rod is kept near A. There is now an insulating gap between them, so electrons cannot move back through the former contact. A remains positive and B negative. Neither sphere is earthed.

3. Remove the rod after separation

3. Remove the rod after separationAfter the spheres have been separated, the negative rod is removed. A retains positive charge and B negative charge. If no charge escaped, their net charges have equal magnitudes and opposite signs, so the combined charge is still zero. Large signs label net charge, not a surface distribution.AB+-GapCombined net charge: zero

After the spheres have been separated, the negative rod is removed. A retains positive charge and B negative charge. If no charge escaped, their net charges have equal magnitudes and opposite signs, so the combined charge is still zero. Large signs label net charge, not a surface distribution.

Separate A and B while the negative rod is still near A. Then remove the rod. A is left positive and B negative. The total charge of the pair stays zero if no charge escapes.
  1. Bring the negative rod near A without touching either sphere. Keep A and B in contact while the electrons move.
  2. Separate the spheres by their insulating stands, with the rod still held near.
  3. Remove the rod. A keeps a positive net charge and B keeps a negative net charge.

No electrons went to Earth. They moved from A to B. Separating the spheres cut the path between them while the rod was still near. If you remove the rod before you separate the spheres, the electrons flow back and both spheres end neutral.

An electroscope can show that each sphere is charged afterwards. Their signs follow from the electron count. You can also check them against an object with a known charge.

Ask where electrons can move at each stage. A metal contact or an Earth wire gives them a path. An insulating gap takes the path away. The right order cuts off the unbalanced charge before the rod is removed.

Check your understanding

Two neutral metal spheres, A and B, touch on insulating stands. A negative rod is held near A. What must be done next so that A is left positive and B negative?

  1. Touch the rod to A, then separate the spheres from each other.
  2. Remove the rod, then separate the spheres from each other.
  3. Separate the spheres while the rod is still near, then remove the rod.
Show the answer

Separate the spheres while the rod is still near, then remove the rod.

The rod has pushed electrons from A into B. Separating the spheres first cuts the path between them, so the electrons stay on B after the rod is taken away.