K323 / 2027
Static electricity overview

Lesson 8 of 8

The electrostatic precipitator

  • I can explain the electrostatic precipitator and apply its principles to a new situation.Syllabus

    Syllabus K323, 13(i). Explain the electrostatic precipitator and apply its principles to a new situation.

Make a guess. You are not marked.

In a precipitator, dust is given a negative charge. The collecting plates are joined to Earth, not to a positive supply. Will the dust still move to the plates?

  1. No. The dust just follows the gas flow straight through.
  2. No. An earthed plate has no charge, so it cannot attract anything.
  3. Yes. The negative wires push the negative dust away, towards the plates.
Show the answer

Yes. The negative wires push the negative dust away, towards the plates.

The field between the negative wires and the earthed plates forces negative charge away from the wires. The wires also repel electrons out of the plates to Earth, so the plate surfaces are left positive and attract the dust.

An electrostatic precipitator charges the dust in waste gas. An electric field then pushes the charged dust onto plates, and cleaner gas flows out.

An electric field arrow shows the force on a positive test charge. A negative charge is forced the opposite way.

A dry electrostatic precipitator removes dust or smoke particles from a stream of gas, such as the waste gas of a power station. Frederick Cottrell, a chemistry professor at the University of California, Berkeley, applied for a patent on one in 1907. The model here uses negative discharge wires between earthed collecting plates.

A negative dust particle is forced towards a collecting plate

This is a cross-sectional force model of a dry wire-and-plate precipitator. A representative negative discharge wire lies between two earthed collecting surfaces.

Gas transport, electric field and force on negative dust have different directionsHorizontal collecting plates above and below are connected to Earth at the right. A negative discharge wire is shown in cross-section between them. The gas moves right, as indicated by blue arrows. A selected negatively charged dust grain above the wire has a downward electric field arrow pointing towards the negative wire, and an upward electric force arrow pointing towards the upper collecting plate. The grain's force is opposite the field because it is negative. Deposits are marked on the collecting surfaces. Charged gas particles transfer charge to dust; a grain need not touch the wire. Later shaking and the hopper are outside this cross-sectional force view.Earthed collecting platesEarth-Negativewire-Force on dustFieldSelectednegative dustGas moves rightDeposits collect on the plates

Charged gas particles transfer negative charge to suspended dust. The electric force drives it towards a collecting surface while gas continues through. A dust grain does not have to touch a wire to become charged.

Later, mechanical shaking removes the deposited dust into a hopper. This is particle removal; it does not remove every gaseous pollutant.

Gas flows to the right. Look at the negative dust particle above a wire. The field there points down, towards the negative wire. The electric force on the particle points up, towards the collecting plate. The field, force and gas-flow arrows show three different things.
  1. Charge the particles. The strong field near the discharge wires ionises the gas: it pulls electrons off gas molecules. Free electrons join other gas molecules and make negative ions. The ions hit the dust and pass their negative charge to it. Dust grains do not need to touch a wire to become charged.
  2. Push them sideways with an electric force. Between the negative wires and the earthed plates, the negative dust feels a force towards the plates. This is opposite to the field direction there.
  3. Collect the particles. Dust settles on the plates. The gas flows on through the device with fewer particles in it.
  4. Remove the dust. From time to time the plates are shaken. The dust falls into a container called a hopper, and the plates can go on collecting.

An earthed plate is not electrically dead. The Earth wire lets charge move between the plate and Earth. The negative wires repel electrons from the plate to Earth, so the surface that faces the wires is left positive. It attracts the negative dust. The plates do not need a positive supply of their own.

The dust moves across the gas flow because an electric force acts on it. A precipitator removes particles. It does not remove polluting gases, and it does not catch every particle.

Explain the charging and the collecting as two steps. First the ions give charge to the dust. Then the field pushes the charged dust to the plates. "The plates attract the smoke" explains neither step.

Check your understanding

How do dust particles become negatively charged in an electrostatic precipitator that has negative discharge wires?

  1. Each dust particle touches a wire and picks up electrons straight from it.
  2. Negative ions made in the gas hit the dust and pass charge to it.
  3. The dust rubs against the collecting plates and gains electrons from them.
Show the answer

Negative ions made in the gas hit the dust and pass charge to it.

The strong field near the wires ionises the gas. Electrons join gas molecules to make negative ions, and these give their charge to the dust when they collide.