K323 / 2027
Electromagnetic induction overview

Lesson 7 of 8

Transformer calculations

  • I can apply the ideal voltage/turns ratio and input/output power equations.Syllabus

    Syllabus K323, 19(e). Apply the ideal voltage/turns ratio and input/output power equations.

In a transformer, the voltages are in the same ratio as the numbers of turns. In an ideal transformer, the power out equals the power in.

A transformer has a primary (input) coil and a secondary (output) coil on one iron core. Electrical power is P = VI.

The two equations

N is the number of turns on a coil, V is the voltage across it and I is the current in it. The letter p means primary and s means secondary.

Vp / Vs = Np / NsKeep each voltage with its own coil's number of turns.
VpIp = VsIsFor an ideal transformer, power in = power out. Volts times amperes gives watts.

An ideal transformer wastes no energy. Real ones waste a little, so their power out is a little less than their power in.

Step down: 240 V to 12 V

Voltage first, then power

1000 primary turns and 50 secondary turns

Vs = Vp x Ns/Np = 240 x 50/1000 = 12.0 V.

The load takes Is = 2.0 A, so the power out = 12.0 x 2.0 = 24 W.

Ideal, so the power in is also 24 W. Ip = 24/240 = 0.100 A.

The secondary, at the lower voltage, carries the larger current.

Step up: 12 V to 60 V

Same power, higher voltage

200 primary turns and 1000 secondary turns

Vs = 12 x 1000/200 = 60 V.

The transformer passes on 30 W. Ip = 30/12 = 2.5 A and Is = 30/60 = 0.50 A.

The voltage goes up five times and the current goes down five times. The transformer does not make extra energy.

Singapore's mains supply is 230 V. To get 12 V from it, a transformer needs Np/Ns = 230/12, which is about 19. So its primary has about 19 times as many turns as its secondary.

Try it step by step

Work it out in steps: Secondary voltage Vs = Vp x Ns / Np in V, then Secondary current Is = P / Vs in A, then Primary current Ip = P / Vp in A.

  1. Problem 1. An ideal transformer has 2000 primary turns and 100 secondary turns. The primary is connected to 240 V and the secondary supplies a 24 W lamp. Find the secondary voltage, the secondary current and the primary current.
  2. Problem 2. An ideal transformer has 1150 primary turns and 50 secondary turns. The primary is connected to 230 V and the secondary supplies 20 W. Find the secondary voltage, the secondary current and the primary current.
  3. Problem 3. An ideal step-up transformer has 100 primary turns and 2000 secondary turns. The primary is connected to 12 V and the secondary supplies 60 W. Find the secondary voltage, the secondary current and the primary current.
Show the answer

Problem 1.

Secondary voltage Vs = Vp x Ns / Np in V: Vs = 240 x 100 / 2000 = 12 V

Secondary current Is = P / Vs in A: Is = 24 / 12 = 2.0 A

Primary current Ip = P / Vp in A: Ideal, so input power = output power: Ip = 24 / 240 = 0.10 A

Problem 2.

Secondary voltage Vs = Vp x Ns / Np in V: Vs = 230 x 50 / 1150 = 10 V

Secondary current Is = P / Vs in A: Is = 20 / 10 = 2.0 A

Primary current Ip = P / Vp in A: Ip = 20 / 230 = 0.087 A (2 sf)

Problem 3.

Secondary voltage Vs = Vp x Ns / Np in V: Vs = 12 x 2000 / 100 = 240 V

Secondary current Is = P / Vs in A: Is = 60 / 240 = 0.25 A

Primary current Ip = P / Vp in A: Ip = 60 / 12 = 5.0 A

The two currents are not equal. Many answers find the secondary current and stop, or use it for the primary. The coil at the higher voltage carries the smaller current. Write "ideal transformer, so power in = power out" before you use it.

Check your understanding

An ideal transformer has 1000 primary turns and 50 secondary turns. Its primary voltage is 240 V, and a connected resistive load takes 2.0 A from the secondary. What are the secondary voltage and primary current?

  1. 4800 V and 40 A
  2. 12 V and 2.0 A
  3. 12 V and 0.100 A
Show the answer

12 V and 0.100 A

Vs = 240 x 50/1000 = 12 V. For the ideal model, input power equals the 12 x 2.0 = 24 W output, so Ip = 24/240 = 0.100 A.